[v2,1/2] arm64: dts: ti: k3-j7200-mcu-wakeup: Add HyperBus node

Commit Message

Vignesh Raghavendra Sept. 23, 2020, 4:31 p.m. UTC

J7200 has a Flash SubSystem that has one OSPI and one HyperBus.. Add
DT nodes for HyperBus controller for now.

Signed-off-by: Vignesh Raghavendra <[e-mail]>
---
 .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      | 27 +++++++++++++++++++
 1 file changed, 27 insertions(+)

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index a43385d8feca..ab22b02c0da5 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -125,4 +125,31 @@  wkup_i2c0: i2c@42120000 {
 		clocks = <&k3_clks 197 1>;
 		power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>;
 	};
+
+	fss: syscon@47000000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x00 0x47000000 0x00 0x100>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hbmc_mux: hbmc-mux {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4 0x2>; /* HBMC select */
+		};
+
+		hbmc: hyperbus@47034000 {
+			compatible = "ti,am654-hbmc";
+			reg = <0x00 0x47034000 0x00 0x100>,
+				<0x05 0x00000000 0x01 0x0000000>;
+			power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+			clocks = <&k3_clks 102 0>;
+			assigned-clocks = <&k3_clks 102 5>;
+			assigned-clock-rates = <333333333>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			mux-controls = <&hbmc_mux 0>;
+		};
+	};
 };