| Message ID | 20201016083826.31427-1-al.kochet@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | spi: spi-sun6i: enable autosuspend feature | expand |
Hi, On Fri, Oct 16, 2020 at 11:38:26AM +0300, Alexander Kochetkov wrote: > If SPI is used for periodic polling any sensor, significant delays > sometimes appear. Switching on module clocks during resume lead to delays. > Enabling autosuspend mode causes the controller to not suspend between > SPI transfers and the delays disappear. > > Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> > --- > drivers/spi/spi-sun6i.c | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) > > diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c > index 38e5b8af7da6..4cc0280e934c 100644 > --- a/drivers/spi/spi-sun6i.c > +++ b/drivers/spi/spi-sun6i.c > @@ -22,6 +22,8 @@ > > #include <linux/spi/spi.h> > > +#define SUN6I_AUTOSUSPEND_TIMEOUT 2000 > + > #define SUN6I_FIFO_DEPTH 128 > #define SUN8I_FIFO_DEPTH 64 > > @@ -639,9 +641,10 @@ static int sun6i_spi_probe(struct platform_device *pdev) > goto err_free_dma_rx; > } > > + pm_runtime_set_autosuspend_delay(&pdev->dev, SUN6I_AUTOSUSPEND_TIMEOUT); > + pm_runtime_use_autosuspend(&pdev->dev); > pm_runtime_set_active(&pdev->dev); > pm_runtime_enable(&pdev->dev); > - pm_runtime_idle(&pdev->dev); You should also mention why pm_runtime_idle isn't useful anymore in your commit log. Thanks! Maxime
On Fri, 16 Oct 2020 11:38:26 +0300, Alexander Kochetkov wrote: > If SPI is used for periodic polling any sensor, significant delays > sometimes appear. Switching on module clocks during resume lead to delays. > Enabling autosuspend mode causes the controller to not suspend between > SPI transfers and the delays disappear. Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next Thanks! [1/1] spi: spi-sun6i: enable autosuspend feature commit: ae0f18bef30d0e76dd62be46c59b24c75f175092 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c index 38e5b8af7da6..4cc0280e934c 100644 --- a/drivers/spi/spi-sun6i.c +++ b/drivers/spi/spi-sun6i.c @@ -22,6 +22,8 @@ #include <linux/spi/spi.h> +#define SUN6I_AUTOSUSPEND_TIMEOUT 2000 + #define SUN6I_FIFO_DEPTH 128 #define SUN8I_FIFO_DEPTH 64 @@ -639,9 +641,10 @@ static int sun6i_spi_probe(struct platform_device *pdev) goto err_free_dma_rx; } + pm_runtime_set_autosuspend_delay(&pdev->dev, SUN6I_AUTOSUSPEND_TIMEOUT); + pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); - pm_runtime_idle(&pdev->dev); ret = devm_spi_register_master(&pdev->dev, master); if (ret) {
If SPI is used for periodic polling any sensor, significant delays sometimes appear. Switching on module clocks during resume lead to delays. Enabling autosuspend mode causes the controller to not suspend between SPI transfers and the delays disappear. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> --- drivers/spi/spi-sun6i.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)