diff mbox series

[2/2] arm64: dts: ti: k3-j721e-common-proc-board: Re-name "link" name as "phy"

Message ID 20201104132902.20377-3-kishon@ti.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: ti: J721E: PCIe/SERDES DT Fixes | expand

Commit Message

Kishon Vijay Abraham I Nov. 4, 2020, 1:29 p.m. UTC 
Commit 66db854b1f62d ("arm64: dts: ti: k3-j721e-common-proc-board:
Configure the PCIe instances") and
commit 02c35dca2b488 ("arm64: dts: ti: k3-j721e: Enable Super-Speed
support for USB0") added PHY DT nodes with node name as "link"
However nodes with #phy-cells should be named 'phy'. Re-name
subnodes of serdes in J721E to 'phy'.

Link: http://lore.kernel.org/r/20200909203631.GA3026331@bogus
Link: http://lore.kernel.org/r/1603898561-5142-1-git-send-email-sjakhade@cadence.com
Fixes: 66db854b1f62d ("arm64: dts: ti: k3-j721e-common-proc-board: Configure the PCIe instances")
Fixes: 02c35dca2b488 ("arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 52e121155563..e837614d8d88 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -325,7 +325,7 @@ 
 };
 
 &serdes3 {
-	serdes3_usb_link: link@0 {
+	serdes3_usb_link: phy@0 {
 		reg = <0>;
 		cdns,num-lanes = <2>;
 		#phy-cells = <0>;
@@ -561,7 +561,7 @@ 
 };
 
 &serdes0 {
-	serdes0_pcie_link: link@0 {
+	serdes0_pcie_link: phy@0 {
 		reg = <0>;
 		cdns,num-lanes = <1>;
 		#phy-cells = <0>;
@@ -571,7 +571,7 @@ 
 };
 
 &serdes1 {
-	serdes1_pcie_link: link@0 {
+	serdes1_pcie_link: phy@0 {
 		reg = <0>;
 		cdns,num-lanes = <2>;
 		#phy-cells = <0>;
@@ -581,7 +581,7 @@ 
 };
 
 &serdes2 {
-	serdes2_pcie_link: link@0 {
+	serdes2_pcie_link: phy@0 {
 		reg = <0>;
 		cdns,num-lanes = <2>;
 		#phy-cells = <0>;