diff mbox series

[V3,3/5] arm64: dts: ti: am65/j721e: Fix up un-necessary status set to "okay" for crypto

Message ID 20201112183538.6805-4-nm@ti.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: ti: Cleanup mix of "okay" and "disabled" | expand

Commit Message

Nishanth Menon Nov. 12, 2020, 6:35 p.m. UTC
The default state of a device tree node is "okay". There is no specific
use of explicitly adding status = "okay" in the SoC dtsi.

Fixes: 8ebcaaae8017 ("arm64: dts: ti: k3-j721e-main: Add crypto accelerator node")
Fixes: b366b2409c97 ("arm64: dts: ti: k3-am6: Add crypto accelarator node")
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
---
Changes since V2:
- No change beyond picking up reviews.

V2: https://lore.kernel.org/linux-arm-kernel/20201112014929.25227-4-nm@ti.com/
V1: https://lore.kernel.org/linux-arm-kernel/20201104224356.18040-4-nm@ti.com/

 arch/arm64/boot/dts/ti/k3-am65-main.dtsi  | 1 -
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 2 --
 2 files changed, 3 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index c842b9803f2d..116818912ba2 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -119,7 +119,6 @@  crypto: crypto@4e00000 {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges = <0x0 0x04e00000 0x00 0x04e00000 0x0 0x30000>;
-		status = "okay";
 
 		dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
 				<&main_udmap 0x4001>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 137966c6be1f..19e602afdb05 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -345,8 +345,6 @@  main_crypto: crypto@4e00000 {
 		#size-cells = <2>;
 		ranges = <0x0 0x04e00000 0x00 0x04e00000 0x0 0x30000>;
 
-		status = "okay";
-
 		dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
 				<&main_udmap 0x4001>;
 		dma-names = "tx", "rx1", "rx2";