diff mbox series

[mvebu-dt,v3,3/7] ARM: dts: turris-omnia: describe switch interrupt

Message ID 20201115135923.11523-4-kabel@kernel.org (mailing list archive)
State New, archived
Headers show
Series Turris Omnia device-tree changes | expand

Commit Message

Marek Behún Nov. 15, 2020, 1:59 p.m. UTC 
Describe switch interrupt for Turris Omnia so that the CPU does not have
to poll the switch. We also need to to set mpp45 pin to gpio function
for this.

Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Cc: linux-arm-kernel@lists.infradead.org
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
---
 arch/arm/boot/dts/armada-385-turris-omnia.dts | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts
index 9de26c78ec4c..7ccebf7d1757 100644
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -260,13 +260,18 @@  phy1: phy@1 {
 
 	/* Switch MV88E6176 at address 0x10 */
 	switch@10 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&swint_pins>;
 		compatible = "marvell,mv88e6085";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		dsa,member = <0 0>;
 
+		dsa,member = <0 0>;
 		reg = <0x10>;
 
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -319,6 +324,11 @@  pcawan_pins: pcawan-pins {
 		marvell,function = "gpio";
 	};
 
+	swint_pins: swint-pins {
+		marvell,pins = "mpp45";
+		marvell,function = "gpio";
+	};
+
 	spi0cs0_pins: spi0cs0-pins {
 		marvell,pins = "mpp25";
 		marvell,function = "spi0";