| Message ID | 20201207084752.1665-2-thunder.leizhen@huawei.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: dts: mmp2-olpc-xo-1-75: clear the warnings when make dtbs | expand |
On Mon, Dec 7, 2020 at 9:47 AM Zhen Lei <thunder.leizhen@huawei.com> wrote: > > The check_spi_bus_bridge() in scripts/dtc/checks.c requires that the node > have "spi-slave" property must with "#address-cells = <0>" and > "#size-cells = <0>". But currently both "#address-cells" and "#size-cells" > properties are deleted, the corresponding default values are 2 and 1. As a > result, the check fails and below warnings is displayed. > > arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \ > /soc/apb@d4000000/spi@d4037000: incorrect #address-cells for SPI bus > also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3 > arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \ > /soc/apb@d4000000/spi@d4037000: incorrect #size-cells for SPI bus > also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3 > arch/arm/boot/dts/mmp2-olpc-xo-1-75.dtb: Warning (spi_bus_reg): \ > Failed prerequisite 'spi_bus_bridge' > > Because the value of "#size-cells" is already defined as zero in the node > "ssp3: spi@d4037000" in arch/arm/boot/dts/mmp2.dtsi. So we only need to > explicitly add "#address-cells = <0>" and keep "#size-cells" no change. > > Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Right, I already sent the same patch earlier. Lubomir, can I apply this to the fixes branch? > arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts > index adde62d6fce73b9..82da44dacba7172 100644 > --- a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts > +++ b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts > @@ -224,7 +224,7 @@ > > &ssp3 { > /delete-property/ #address-cells; > - /delete-property/ #size-cells; > + #address-cells = <0>; > spi-slave; > status = "okay"; > ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>; > -- > 1.8.3 > >
On 2020/12/8 21:58, Arnd Bergmann wrote: > On Mon, Dec 7, 2020 at 9:47 AM Zhen Lei <thunder.leizhen@huawei.com> wrote: >> >> The check_spi_bus_bridge() in scripts/dtc/checks.c requires that the node >> have "spi-slave" property must with "#address-cells = <0>" and >> "#size-cells = <0>". But currently both "#address-cells" and "#size-cells" >> properties are deleted, the corresponding default values are 2 and 1. As a >> result, the check fails and below warnings is displayed. >> >> arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \ >> /soc/apb@d4000000/spi@d4037000: incorrect #address-cells for SPI bus >> also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3 >> arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \ >> /soc/apb@d4000000/spi@d4037000: incorrect #size-cells for SPI bus >> also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3 >> arch/arm/boot/dts/mmp2-olpc-xo-1-75.dtb: Warning (spi_bus_reg): \ >> Failed prerequisite 'spi_bus_bridge' >> >> Because the value of "#size-cells" is already defined as zero in the node >> "ssp3: spi@d4037000" in arch/arm/boot/dts/mmp2.dtsi. So we only need to >> explicitly add "#address-cells = <0>" and keep "#size-cells" no change. >> >> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> > > Right, I already sent the same patch earlier. Oh, sorry, I don't known it. If you send it earlier, please apply your patch! > > Lubomir, can I apply this to the fixes branch? This fix is really should be considered to merge into v5.10. > >> arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts >> index adde62d6fce73b9..82da44dacba7172 100644 >> --- a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts >> +++ b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts >> @@ -224,7 +224,7 @@ >> >> &ssp3 { >> /delete-property/ #address-cells; >> - /delete-property/ #size-cells; >> + #address-cells = <0>; >> spi-slave; >> status = "okay"; >> ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>; >> -- >> 1.8.3 >> >> > > . >
diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts index adde62d6fce73b9..82da44dacba7172 100644 --- a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts +++ b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts @@ -224,7 +224,7 @@ &ssp3 { /delete-property/ #address-cells; - /delete-property/ #size-cells; + #address-cells = <0>; spi-slave; status = "okay"; ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>;
The check_spi_bus_bridge() in scripts/dtc/checks.c requires that the node have "spi-slave" property must with "#address-cells = <0>" and "#size-cells = <0>". But currently both "#address-cells" and "#size-cells" properties are deleted, the corresponding default values are 2 and 1. As a result, the check fails and below warnings is displayed. arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \ /soc/apb@d4000000/spi@d4037000: incorrect #address-cells for SPI bus also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3 arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \ /soc/apb@d4000000/spi@d4037000: incorrect #size-cells for SPI bus also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3 arch/arm/boot/dts/mmp2-olpc-xo-1-75.dtb: Warning (spi_bus_reg): \ Failed prerequisite 'spi_bus_bridge' Because the value of "#size-cells" is already defined as zero in the node "ssp3: spi@d4037000" in arch/arm/boot/dts/mmp2.dtsi. So we only need to explicitly add "#address-cells = <0>" and keep "#size-cells" no change. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> --- arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)