diff mbox series

[v3,3/6] arm64: dts: imx8mq: Add interconnect for lcdif

Message ID 20201210100906.18205-4-martin.kepplinger@puri.sm (mailing list archive)
State New, archived
Headers show
Series imx8mq: updates for the interconnect fabric | expand

Commit Message

Martin Kepplinger Dec. 10, 2020, 10:09 a.m. UTC 
Add interconnect ports for lcdif to set bus capabilities.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 3 +++
 1 file changed, 3 insertions(+)

Comments

Georgi Djakov Jan. 4, 2021, 2:54 p.m. UTC | #1 
On 12/10/20 12:09, Martin Kepplinger wrote:
> Add interconnect ports for lcdif to set bus capabilities.
> 
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> ---
>   arch/arm64/boot/dts/freescale/imx8mq.dtsi | 3 +++
>   1 file changed, 3 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index 3617b7238952..7c4b68bda6fa 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -11,6 +11,7 @@
>   #include "dt-bindings/input/input.h"
>   #include <dt-bindings/interrupt-controller/arm-gic.h>
>   #include <dt-bindings/thermal/thermal.h>
> +#include <dt-bindings/interconnect/imx8mq.h>
>   #include "imx8mq-pinfunc.h"
>   
>   / {
> @@ -522,6 +523,8 @@
>   						  <&clk IMX8MQ_VIDEO_PLL1>,
>   						  <&clk IMX8MQ_VIDEO_PLL1_OUT>;
>   				assigned-clock-rates = <0>, <0>, <0>, <594000000>;
> +				interconnects = <&noc IMX8MQ_ICM_LCDIF &noc IMX8MQ_ICS_DRAM>;
> +				interconnect-names = "dram";
>   				status = "disabled";
>   
>   				port@0 {
> 

Nit: IMO, the dt-bindings patch (4/6) should come before this one - first
document the DT properties and then use them. Otherwise looks good to me.

Thanks,
Georgi
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 3617b7238952..7c4b68bda6fa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -11,6 +11,7 @@ 
 #include "dt-bindings/input/input.h"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/interconnect/imx8mq.h>
 #include "imx8mq-pinfunc.h"
 
 / {
@@ -522,6 +523,8 @@ 
 						  <&clk IMX8MQ_VIDEO_PLL1>,
 						  <&clk IMX8MQ_VIDEO_PLL1_OUT>;
 				assigned-clock-rates = <0>, <0>, <0>, <594000000>;
+				interconnects = <&noc IMX8MQ_ICM_LCDIF &noc IMX8MQ_ICS_DRAM>;
+				interconnect-names = "dram";
 				status = "disabled";
 
 				port@0 {