| Message ID | 20201211031741.23711-1-billy_tsai@aspeedtech.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | driver: aspeed: g6: Fix PWMG0 pinctrl setting | expand |
On Fri, 11 Dec 2020 at 03:18, Billy Tsai <billy_tsai@aspeedtech.com> wrote: > > The SCU offset for signal PWM8 in group PWM8G0 is wrong, fix it from > SCU414 to SCU4B4. > Besides that, When PWM8~15 of PWMG0 set it needs to clear SCU414 bits at > the same time. > > Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support") > > Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> > --- > drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 26 ++++++++++++++-------- > 1 file changed, 17 insertions(+), 9 deletions(-) > > diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c > index 34803a6c7664..6e61f045936f 100644 > --- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c > +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c > @@ -346,50 +346,58 @@ FUNC_GROUP_DECL(RGMII4, F24, E23, E24, E25, D26, D24, C25, C26, C24, B26, B25, > FUNC_GROUP_DECL(RMII4, F24, E23, E24, E25, C25, C24, B26, B25, B24); > > #define D22 40 > -SIG_EXPR_LIST_DECL_SESG(D22, SD1CLK, SD1, SIG_DESC_SET(SCU414, 8)); > -SIG_EXPR_LIST_DECL_SEMG(D22, PWM8, PWM8G0, PWM8, SIG_DESC_SET(SCU414, 8)); > +SIG_EXPR_LIST_DECL_SESG(D22, SD1CLK, SD1, SIG_DESC_SET(SCU414, 8)) Is this missing a semicolon? > +SIG_EXPR_LIST_DECL_SEMG(D22, PWM8, PWM8G0, PWM8, SIG_DESC_SET(SCU4B4, 8), > + SIG_DESC_CLEAR(SCU414, 8));
Hi Joel,
On 2020/12/11, 6:55 PM, Joel Stanley wrote:
On Fri, 11 Dec 2020 at 03:18, Billy Tsai <billy_tsai@aspeedtech.com> wrote:
>
> The SCU offset for signal PWM8 in group PWM8G0 is wrong, fix it from
> SCU414 to SCU4B4.
> Besides that, When PWM8~15 of PWMG0 set it needs to clear SCU414 bits at
> the same time.
>
> Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support")
>
> Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
> ---
> drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 26 ++++++++++++++--------
> 1 file changed, 17 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
> index 34803a6c7664..6e61f045936f 100644
> --- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
> +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
> @@ -346,50 +346,58 @@ FUNC_GROUP_DECL(RGMII4, F24, E23, E24, E25, D26, D24, C25, C26, C24, B26, B25,
> FUNC_GROUP_DECL(RMII4, F24, E23, E24, E25, C25, C24, B26, B25, B24);
>
> #define D22 40
> -SIG_EXPR_LIST_DECL_SESG(D22, SD1CLK, SD1, SIG_DESC_SET(SCU414, 8));
> -SIG_EXPR_LIST_DECL_SEMG(D22, PWM8, PWM8G0, PWM8, SIG_DESC_SET(SCU414, 8));
> +SIG_EXPR_LIST_DECL_SESG(D22, SD1CLK, SD1, SIG_DESC_SET(SCU414, 8))
Is this missing a semicolon?
Yes, thanks for your check. I will send v2 to fix it.
> +SIG_EXPR_LIST_DECL_SEMG(D22, PWM8, PWM8G0, PWM8, SIG_DESC_SET(SCU4B4, 8),
> + SIG_DESC_CLEAR(SCU414, 8));
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c index 34803a6c7664..6e61f045936f 100644 --- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c @@ -346,50 +346,58 @@ FUNC_GROUP_DECL(RGMII4, F24, E23, E24, E25, D26, D24, C25, C26, C24, B26, B25, FUNC_GROUP_DECL(RMII4, F24, E23, E24, E25, C25, C24, B26, B25, B24); #define D22 40 -SIG_EXPR_LIST_DECL_SESG(D22, SD1CLK, SD1, SIG_DESC_SET(SCU414, 8)); -SIG_EXPR_LIST_DECL_SEMG(D22, PWM8, PWM8G0, PWM8, SIG_DESC_SET(SCU414, 8)); +SIG_EXPR_LIST_DECL_SESG(D22, SD1CLK, SD1, SIG_DESC_SET(SCU414, 8)) +SIG_EXPR_LIST_DECL_SEMG(D22, PWM8, PWM8G0, PWM8, SIG_DESC_SET(SCU4B4, 8), + SIG_DESC_CLEAR(SCU414, 8)); PIN_DECL_2(D22, GPIOF0, SD1CLK, PWM8); GROUP_DECL(PWM8G0, D22); #define E22 41 SIG_EXPR_LIST_DECL_SESG(E22, SD1CMD, SD1, SIG_DESC_SET(SCU414, 9)); -SIG_EXPR_LIST_DECL_SEMG(E22, PWM9, PWM9G0, PWM9, SIG_DESC_SET(SCU4B4, 9)); +SIG_EXPR_LIST_DECL_SEMG(E22, PWM9, PWM9G0, PWM9, SIG_DESC_SET(SCU4B4, 9), + SIG_DESC_CLEAR(SCU414, 9)); PIN_DECL_2(E22, GPIOF1, SD1CMD, PWM9); GROUP_DECL(PWM9G0, E22); #define D23 42 SIG_EXPR_LIST_DECL_SESG(D23, SD1DAT0, SD1, SIG_DESC_SET(SCU414, 10)); -SIG_EXPR_LIST_DECL_SEMG(D23, PWM10, PWM10G0, PWM10, SIG_DESC_SET(SCU4B4, 10)); +SIG_EXPR_LIST_DECL_SEMG(D23, PWM10, PWM10G0, PWM10, SIG_DESC_SET(SCU4B4, 10), + SIG_DESC_CLEAR(SCU414, 10)); PIN_DECL_2(D23, GPIOF2, SD1DAT0, PWM10); GROUP_DECL(PWM10G0, D23); #define C23 43 SIG_EXPR_LIST_DECL_SESG(C23, SD1DAT1, SD1, SIG_DESC_SET(SCU414, 11)); -SIG_EXPR_LIST_DECL_SEMG(C23, PWM11, PWM11G0, PWM11, SIG_DESC_SET(SCU4B4, 11)); +SIG_EXPR_LIST_DECL_SEMG(C23, PWM11, PWM11G0, PWM11, SIG_DESC_SET(SCU4B4, 11), + SIG_DESC_CLEAR(SCU414, 11)); PIN_DECL_2(C23, GPIOF3, SD1DAT1, PWM11); GROUP_DECL(PWM11G0, C23); #define C22 44 SIG_EXPR_LIST_DECL_SESG(C22, SD1DAT2, SD1, SIG_DESC_SET(SCU414, 12)); -SIG_EXPR_LIST_DECL_SEMG(C22, PWM12, PWM12G0, PWM12, SIG_DESC_SET(SCU4B4, 12)); +SIG_EXPR_LIST_DECL_SEMG(C22, PWM12, PWM12G0, PWM12, SIG_DESC_SET(SCU4B4, 12), + SIG_DESC_CLEAR(SCU414, 12)); PIN_DECL_2(C22, GPIOF4, SD1DAT2, PWM12); GROUP_DECL(PWM12G0, C22); #define A25 45 SIG_EXPR_LIST_DECL_SESG(A25, SD1DAT3, SD1, SIG_DESC_SET(SCU414, 13)); -SIG_EXPR_LIST_DECL_SEMG(A25, PWM13, PWM13G0, PWM13, SIG_DESC_SET(SCU4B4, 13)); +SIG_EXPR_LIST_DECL_SEMG(A25, PWM13, PWM13G0, PWM13, SIG_DESC_SET(SCU4B4, 13), + SIG_DESC_CLEAR(SCU414, 13)); PIN_DECL_2(A25, GPIOF5, SD1DAT3, PWM13); GROUP_DECL(PWM13G0, A25); #define A24 46 SIG_EXPR_LIST_DECL_SESG(A24, SD1CD, SD1, SIG_DESC_SET(SCU414, 14)); -SIG_EXPR_LIST_DECL_SEMG(A24, PWM14, PWM14G0, PWM14, SIG_DESC_SET(SCU4B4, 14)); +SIG_EXPR_LIST_DECL_SEMG(A24, PWM14, PWM14G0, PWM14, SIG_DESC_SET(SCU4B4, 14), + SIG_DESC_CLEAR(SCU414, 14)); PIN_DECL_2(A24, GPIOF6, SD1CD, PWM14); GROUP_DECL(PWM14G0, A24); #define A23 47 SIG_EXPR_LIST_DECL_SESG(A23, SD1WP, SD1, SIG_DESC_SET(SCU414, 15)); -SIG_EXPR_LIST_DECL_SEMG(A23, PWM15, PWM15G0, PWM15, SIG_DESC_SET(SCU4B4, 15)); +SIG_EXPR_LIST_DECL_SEMG(A23, PWM15, PWM15G0, PWM15, SIG_DESC_SET(SCU4B4, 15), + SIG_DESC_CLEAR(SCU414, 15)); PIN_DECL_2(A23, GPIOF7, SD1WP, PWM15); GROUP_DECL(PWM15G0, A23);
The SCU offset for signal PWM8 in group PWM8G0 is wrong, fix it from SCU414 to SCU4B4. Besides that, When PWM8~15 of PWMG0 set it needs to clear SCU414 bits at the same time. Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support") Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> --- drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 26 ++++++++++++++-------- 1 file changed, 17 insertions(+), 9 deletions(-)