diff mbox series

[v3,15/15] arm64: dts: ti: k3-j721e-common-proc-board: Re-name "link" name as "phy"

Message ID 20201224111627.32590-16-kishon@ti.com (mailing list archive)
State New, archived
Headers show
Series PHY: Add support in Sierra to use external clock | expand

Commit Message

Kishon Vijay Abraham I Dec. 24, 2020, 11:16 a.m. UTC 
Commit 66db854b1f62d ("arm64: dts: ti: k3-j721e-common-proc-board:
Configure the PCIe instances") and
commit 02c35dca2b488 ("arm64: dts: ti: k3-j721e: Enable Super-Speed
support for USB0") added PHY DT nodes with node name as "link"
However nodes with #phy-cells should be named 'phy' as discussed in [1].
Re-name subnodes of serdes in J721E to 'phy'.

[1] -> http://lore.kernel.org/r/20200909203631.GA3026331@bogus
Fixes: 66db854b1f62d ("arm64: dts: ti: k3-j721e-common-proc-board: Configure the PCIe instances")
Fixes: 02c35dca2b488 ("arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 788126daf91c..13ae0d89caf2 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -358,7 +358,7 @@ 
 };
 
 &serdes3 {
-	serdes3_usb_link: link@0 {
+	serdes3_usb_link: phy@0 {
 		reg = <0>;
 		cdns,num-lanes = <2>;
 		#phy-cells = <0>;
@@ -685,7 +685,7 @@ 
 };
 
 &serdes0 {
-	serdes0_pcie_link: link@0 {
+	serdes0_pcie_link: phy@0 {
 		reg = <0>;
 		cdns,num-lanes = <1>;
 		#phy-cells = <0>;
@@ -695,7 +695,7 @@ 
 };
 
 &serdes1 {
-	serdes1_pcie_link: link@0 {
+	serdes1_pcie_link: phy@0 {
 		reg = <0>;
 		cdns,num-lanes = <2>;
 		#phy-cells = <0>;
@@ -705,7 +705,7 @@ 
 };
 
 &serdes2 {
-	serdes2_pcie_link: link@0 {
+	serdes2_pcie_link: phy@0 {
 		reg = <0>;
 		cdns,num-lanes = <2>;
 		#phy-cells = <0>;