| Message ID | 20210112231549.29957-2-andreas@kemnade.info (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: dts: imx: uart improvements for ebookreaders | expand |
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts index caa279608803..e17c75c360f2 100644 --- a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts +++ b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts @@ -396,7 +396,7 @@ pinctrl_uart1: uart1grp { fsl,pins = < MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 - MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x1b0b1 + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 >; }; @@ -543,6 +543,7 @@ }; &uart1 { + /* J4, through-holes */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay";
Configuration was correct enough to work with the pre-configuration done by uboot. While at it, also document the location. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> --- arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)