[v4,1/3] dt-bindings: reset: microchip sparx5 reset driver bindings

Commit Message

Steen Hegelund Jan. 20, 2021, 8:19 a.m. UTC

Document the Sparx5 reset device driver bindings

The driver uses two syscons on sparx5 for access to
the reset control and the reset status.

Signed-off-by: Steen Hegelund <[e-mail]>
---
 .../bindings/reset/microchip,rst.yaml         | 59 +++++++++++++++++++
 1 file changed, 59 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/microchip,rst.yaml

Patch

diff --git a/Documentation/devicetree/bindings/reset/microchip,rst.yaml b/Documentation/devicetree/bindings/reset/microchip,rst.yaml
new file mode 100644
index 000000000000..af01016e246f
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/microchip,rst.yaml
@@ -0,0 +1,59 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/microchip,rst.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Microchip Sparx5 Switch Reset Controller
+
+maintainers:
+  - Steen Hegelund <[e-mail]>
+  - Lars Povlsen <[e-mail]>
+
+description: |
+  The Microchip Sparx5 Switch provides reset control and implements the following
+  functions
+    - One Time Switch Core Reset (Soft Reset)
+
+properties:
+  $nodename:
+    pattern: "^reset-controller@[0-9a-f]+$"
+
+  compatible:
+    const: microchip,sparx5-switch-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+  cpu-syscon:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: syscon used to access CPU reset
+    maxItems: 1
+
+  gcb-syscon:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: syscon used to access Global Control Block
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+  - cpu-syscon
+  - gcb-syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    reset: reset-controller@0 {
+        compatible = "microchip,sparx5-switch-reset";
+        reg = <0x0 0x0>;
+        #reset-cells = <1>;
+        cpu-syscon = <&cpu_ctrl>;
+        gcb-syscon = <&gcb_ctrl>;
+    };
+