| Message ID | 20210120185140.16929-1-scott.branden@broadcom.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: stingray: remove sata | expand |
On 1/20/2021 10:51 AM, Scott Branden wrote: > Remove sata from stingray as it is unsupported. > > Signed-off-by: Scott Branden <scott.branden@broadcom.com> > --- > .../dts/broadcom/stingray/bcm958742-base.dtsi | 64 ---- > .../dts/broadcom/stingray/stingray-sata.dtsi | 278 ------------------ > .../boot/dts/broadcom/stingray/stingray.dtsi | 7 - > 3 files changed, 349 deletions(-) > delete mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi > > diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi > index 43aa5e9c0020..8fe7325cfbb2 100644 > --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi > +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi > @@ -56,70 +56,6 @@ > }; > }; > > -&sata0 { > - status = "okay"; > -}; > - > -&sata_phy0{ > - status = "okay"; > -}; > - > -&sata1 { > - status = "okay"; > -}; > - > -&sata_phy1{ > - status = "okay"; > -}; > - > -&sata2 { > - status = "okay"; > -}; > - > -&sata_phy2{ > - status = "okay"; > -}; > - > -&sata3 { > - status = "okay"; > -}; > - > -&sata_phy3{ > - status = "okay"; > -}; > - > -&sata4 { > - status = "okay"; > -}; > - > -&sata_phy4{ > - status = "okay"; > -}; > - > -&sata5 { > - status = "okay"; > -}; > - > -&sata_phy5{ > - status = "okay"; > -}; > - > -&sata6 { > - status = "okay"; > -}; > - > -&sata_phy6{ > - status = "okay"; > -}; > - > -&sata7 { > - status = "okay"; > -}; > - > -&sata_phy7{ > - status = "okay"; > -}; > - > &pwm { > status = "okay"; > }; > diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi > deleted file mode 100644 > index 8c68e0c26f1b..000000000000 > --- a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi > +++ /dev/null > @@ -1,278 +0,0 @@ > -/* > - * BSD LICENSE > - * > - * Copyright(c) 2016-2017 Broadcom. All rights reserved. > - * > - * Redistribution and use in source and binary forms, with or without > - * modification, are permitted provided that the following conditions > - * are met: > - * > - * * Redistributions of source code must retain the above copyright > - * notice, this list of conditions and the following disclaimer. > - * * Redistributions in binary form must reproduce the above copyright > - * notice, this list of conditions and the following disclaimer in > - * the documentation and/or other materials provided with the > - * distribution. > - * * Neither the name of Broadcom nor the names of its > - * contributors may be used to endorse or promote products derived > - * from this software without specific prior written permission. > - * > - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS > - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT > - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR > - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT > - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, > - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT > - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, > - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY > - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT > - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE > - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. > - */ > - > - sata { > - compatible = "simple-bus"; > - #address-cells = <1>; > - #size-cells = <1>; > - ranges = <0x0 0x0 0x67d00000 0x00800000>; > - > - sata0: ahci@0 { > - compatible = "brcm,iproc-ahci", "generic-ahci"; > - reg = <0x00000000 0x1000>; > - reg-names = "ahci"; > - interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - > - sata0_port0: sata-port@0 { > - reg = <0>; > - phys = <&sata0_phy0>; > - phy-names = "sata-phy"; > - }; > - }; > - > - sata_phy0: sata_phy@2100 { > - compatible = "brcm,iproc-sr-sata-phy"; > - reg = <0x00002100 0x1000>; > - reg-names = "phy"; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - > - sata0_phy0: sata-phy@0 { > - reg = <0>; > - #phy-cells = <0>; > - }; > - }; > - > - sata1: ahci@10000 { > - compatible = "brcm,iproc-ahci", "generic-ahci"; > - reg = <0x00010000 0x1000>; > - reg-names = "ahci"; > - interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - > - sata1_port0: sata-port@0 { > - reg = <0>; > - phys = <&sata1_phy0>; > - phy-names = "sata-phy"; > - }; > - }; > - > - sata_phy1: sata_phy@12100 { > - compatible = "brcm,iproc-sr-sata-phy"; > - reg = <0x00012100 0x1000>; > - reg-names = "phy"; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - > - sata1_phy0: sata-phy@0 { > - reg = <0>; > - #phy-cells = <0>; > - }; > - }; > - > - sata2: ahci@20000 { > - compatible = "brcm,iproc-ahci", "generic-ahci"; > - reg = <0x00020000 0x1000>; > - reg-names = "ahci"; > - interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - > - sata2_port0: sata-port@0 { > - reg = <0>; > - phys = <&sata2_phy0>; > - phy-names = "sata-phy"; > - }; > - }; > - > - sata_phy2: sata_phy@22100 { > - compatible = "brcm,iproc-sr-sata-phy"; > - reg = <0x00022100 0x1000>; > - reg-names = "phy"; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - > - sata2_phy0: sata-phy@0 { > - reg = <0>; > - #phy-cells = <0>; > - }; > - }; > - > - sata3: ahci@30000 { > - compatible = "brcm,iproc-ahci", "generic-ahci"; > - reg = <0x00030000 0x1000>; > - reg-names = "ahci"; > - interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - > - sata3_port0: sata-port@0 { > - reg = <0>; > - phys = <&sata3_phy0>; > - phy-names = "sata-phy"; > - }; > - }; > - > - sata_phy3: sata_phy@32100 { > - compatible = "brcm,iproc-sr-sata-phy"; > - reg = <0x00032100 0x1000>; > - reg-names = "phy"; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - > - sata3_phy0: sata-phy@0 { > - reg = <0>; > - #phy-cells = <0>; > - }; > - }; > - > - sata4: ahci@100000 { > - compatible = "brcm,iproc-ahci", "generic-ahci"; > - reg = <0x00100000 0x1000>; > - reg-names = "ahci"; > - interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - > - sata4_port0: sata-port@0 { > - reg = <0>; > - phys = <&sata4_phy0>; > - phy-names = "sata-phy"; > - }; > - }; > - > - sata_phy4: sata_phy@102100 { > - compatible = "brcm,iproc-sr-sata-phy"; > - reg = <0x00102100 0x1000>; > - reg-names = "phy"; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - > - sata4_phy0: sata-phy@0 { > - reg = <0>; > - #phy-cells = <0>; > - }; > - }; > - > - sata5: ahci@110000 { > - compatible = "brcm,iproc-ahci", "generic-ahci"; > - reg = <0x00110000 0x1000>; > - reg-names = "ahci"; > - interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - > - sata5_port0: sata-port@0 { > - reg = <0>; > - phys = <&sata5_phy0>; > - phy-names = "sata-phy"; > - }; > - }; > - > - sata_phy5: sata_phy@112100 { > - compatible = "brcm,iproc-sr-sata-phy"; > - reg = <0x00112100 0x1000>; > - reg-names = "phy"; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - > - sata5_phy0: sata-phy@0 { > - reg = <0>; > - #phy-cells = <0>; > - }; > - }; > - > - sata6: ahci@120000 { > - compatible = "brcm,iproc-ahci", "generic-ahci"; > - reg = <0x00120000 0x1000>; > - reg-names = "ahci"; > - interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - > - sata6_port0: sata-port@0 { > - reg = <0>; > - phys = <&sata6_phy0>; > - phy-names = "sata-phy"; > - }; > - }; > - > - sata_phy6: sata_phy@122100 { > - compatible = "brcm,iproc-sr-sata-phy"; > - reg = <0x00122100 0x1000>; > - reg-names = "phy"; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - > - sata6_phy0: sata-phy@0 { > - reg = <0>; > - #phy-cells = <0>; > - }; > - }; > - > - sata7: ahci@130000 { > - compatible = "brcm,iproc-ahci", "generic-ahci"; > - reg = <0x00130000 0x1000>; > - reg-names = "ahci"; > - interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - > - sata7_port0: sata-port@0 { > - reg = <0>; > - phys = <&sata7_phy0>; > - phy-names = "sata-phy"; > - }; > - }; > - > - sata_phy7: sata_phy@132100 { > - compatible = "brcm,iproc-sr-sata-phy"; > - reg = <0x00132100 0x1000>; > - reg-names = "phy"; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - > - sata7_phy0: sata-phy@0 { > - reg = <0>; > - #phy-cells = <0>; > - }; > - }; > - }; > diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi > index b425b12c3ed2..2ffb2c92182a 100644 > --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi > +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi > @@ -285,7 +285,6 @@ > }; > > #include "stingray-fs4.dtsi" > - #include "stingray-sata.dtsi" > #include "stingray-pcie.dtsi" > #include "stingray-usb.dtsi" > > @@ -309,12 +308,6 @@ > #size-cells = <0>; > }; > > - mdio@2 { /* SATA */ > - reg = <0x2>; > - #address-cells = <1>; > - #size-cells = <0>; > - }; > - > mdio@3 { /* USB */ > reg = <0x3>; > #address-cells = <1>; > The entire change looks good to me! Acked-by: Ray Jui <ray.jui@broadcom.com>
On 1/20/2021 10:51 AM, Scott Branden wrote: > Remove sata from stingray as it is unsupported. > > Signed-off-by: Scott Branden <scott.branden@broadcom.com> Applied to devicetree-arm64/next with a slightly reworded subject and commit message along with Ray's acked-by tag: https://github.com/Broadcom/stblinux/commit/142836ca820a7ad3b397bbdda7c35971f4b9772d Thanks!
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi index 43aa5e9c0020..8fe7325cfbb2 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi @@ -56,70 +56,6 @@ }; }; -&sata0 { - status = "okay"; -}; - -&sata_phy0{ - status = "okay"; -}; - -&sata1 { - status = "okay"; -}; - -&sata_phy1{ - status = "okay"; -}; - -&sata2 { - status = "okay"; -}; - -&sata_phy2{ - status = "okay"; -}; - -&sata3 { - status = "okay"; -}; - -&sata_phy3{ - status = "okay"; -}; - -&sata4 { - status = "okay"; -}; - -&sata_phy4{ - status = "okay"; -}; - -&sata5 { - status = "okay"; -}; - -&sata_phy5{ - status = "okay"; -}; - -&sata6 { - status = "okay"; -}; - -&sata_phy6{ - status = "okay"; -}; - -&sata7 { - status = "okay"; -}; - -&sata_phy7{ - status = "okay"; -}; - &pwm { status = "okay"; }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi deleted file mode 100644 index 8c68e0c26f1b..000000000000 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi +++ /dev/null @@ -1,278 +0,0 @@ -/* - * BSD LICENSE - * - * Copyright(c) 2016-2017 Broadcom. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Broadcom nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - - sata { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x67d00000 0x00800000>; - - sata0: ahci@0 { - compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00000000 0x1000>; - reg-names = "ahci"; - interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata0_port0: sata-port@0 { - reg = <0>; - phys = <&sata0_phy0>; - phy-names = "sata-phy"; - }; - }; - - sata_phy0: sata_phy@2100 { - compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00002100 0x1000>; - reg-names = "phy"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata0_phy0: sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - }; - - sata1: ahci@10000 { - compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00010000 0x1000>; - reg-names = "ahci"; - interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata1_port0: sata-port@0 { - reg = <0>; - phys = <&sata1_phy0>; - phy-names = "sata-phy"; - }; - }; - - sata_phy1: sata_phy@12100 { - compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00012100 0x1000>; - reg-names = "phy"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata1_phy0: sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - }; - - sata2: ahci@20000 { - compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00020000 0x1000>; - reg-names = "ahci"; - interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata2_port0: sata-port@0 { - reg = <0>; - phys = <&sata2_phy0>; - phy-names = "sata-phy"; - }; - }; - - sata_phy2: sata_phy@22100 { - compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00022100 0x1000>; - reg-names = "phy"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata2_phy0: sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - }; - - sata3: ahci@30000 { - compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00030000 0x1000>; - reg-names = "ahci"; - interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata3_port0: sata-port@0 { - reg = <0>; - phys = <&sata3_phy0>; - phy-names = "sata-phy"; - }; - }; - - sata_phy3: sata_phy@32100 { - compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00032100 0x1000>; - reg-names = "phy"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata3_phy0: sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - }; - - sata4: ahci@100000 { - compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00100000 0x1000>; - reg-names = "ahci"; - interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata4_port0: sata-port@0 { - reg = <0>; - phys = <&sata4_phy0>; - phy-names = "sata-phy"; - }; - }; - - sata_phy4: sata_phy@102100 { - compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00102100 0x1000>; - reg-names = "phy"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata4_phy0: sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - }; - - sata5: ahci@110000 { - compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00110000 0x1000>; - reg-names = "ahci"; - interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata5_port0: sata-port@0 { - reg = <0>; - phys = <&sata5_phy0>; - phy-names = "sata-phy"; - }; - }; - - sata_phy5: sata_phy@112100 { - compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00112100 0x1000>; - reg-names = "phy"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata5_phy0: sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - }; - - sata6: ahci@120000 { - compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00120000 0x1000>; - reg-names = "ahci"; - interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata6_port0: sata-port@0 { - reg = <0>; - phys = <&sata6_phy0>; - phy-names = "sata-phy"; - }; - }; - - sata_phy6: sata_phy@122100 { - compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00122100 0x1000>; - reg-names = "phy"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata6_phy0: sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - }; - - sata7: ahci@130000 { - compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00130000 0x1000>; - reg-names = "ahci"; - interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata7_port0: sata-port@0 { - reg = <0>; - phys = <&sata7_phy0>; - phy-names = "sata-phy"; - }; - }; - - sata_phy7: sata_phy@132100 { - compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00132100 0x1000>; - reg-names = "phy"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata7_phy0: sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - }; - }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index b425b12c3ed2..2ffb2c92182a 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -285,7 +285,6 @@ }; #include "stingray-fs4.dtsi" - #include "stingray-sata.dtsi" #include "stingray-pcie.dtsi" #include "stingray-usb.dtsi" @@ -309,12 +308,6 @@ #size-cells = <0>; }; - mdio@2 { /* SATA */ - reg = <0x2>; - #address-cells = <1>; - #size-cells = <0>; - }; - mdio@3 { /* USB */ reg = <0x3>; #address-cells = <1>;
Remove sata from stingray as it is unsupported. Signed-off-by: Scott Branden <scott.branden@broadcom.com> --- .../dts/broadcom/stingray/bcm958742-base.dtsi | 64 ---- .../dts/broadcom/stingray/stingray-sata.dtsi | 278 ------------------ .../boot/dts/broadcom/stingray/stingray.dtsi | 7 - 3 files changed, 349 deletions(-) delete mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi