diff mbox series

[v2,5/7] ARM: dts: imx6dl-prtvt7: Remove backlight enable gpio

Message ID 20210121061141.23062-6-o.rempel@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series devicetree fixes for Protonic and Plymovent boards | expand

Commit Message

Oleksij Rempel Jan. 21, 2021, 6:11 a.m. UTC 
The backlight power is controlled through the reg_bl_12v0 regulator.

Co-Developed-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boot/dts/imx6dl-prtvt7.dts | 9 ---------
 1 file changed, 9 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
index 836026a0e219..8a1491975da8 100644
--- a/arch/arm/boot/dts/imx6dl-prtvt7.dts
+++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts
@@ -21,14 +21,11 @@  memory@10000000 {
 
 	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
 		pwms = <&pwm1 0 500000>;
 		brightness-levels = <0 20 81 248 1000>;
 		default-brightness-level = <20>;
 		num-interpolated-steps = <21>;
 		power-supply = <&reg_bl_12v0>;
-		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
 	};
 
 	display {
@@ -362,12 +359,6 @@  MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
 		>;
 	};
 
-	pinctrl_backlight: backlightgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28	0x1b0b0
-		>;
-	};
-
 	pinctrl_can1phy: can1phy {
 		fsl,pins = <
 			/* CAN1_SR */