diff mbox series

ARM: dts: pbab01: Select synchronous mode for AUDMUX

Message ID 20210214063038.4715-1-shc_work@mail.ru (mailing list archive)
State New, archived
Headers show
Series ARM: dts: pbab01: Select synchronous mode for AUDMUX | expand

Commit Message

Alexander Shiyan Feb. 14, 2021, 6:30 a.m. UTC
Board uses 4-wire synchronous mode for audio,
so add SYN bit for PTCR AUDMUX registers.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

Comments

Shawn Guo March 5, 2021, 8:51 a.m. UTC | #1
On Sun, Feb 14, 2021 at 09:30:38AM +0300, Alexander Shiyan wrote:
> Board uses 4-wire synchronous mode for audio,
> so add SYN bit for PTCR AUDMUX registers.
> 
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>

Applied, thanks.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
index d434868e870a..10abb47b46b9 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
@@ -78,7 +78,8 @@  &audmux {
 	ssi2 {
 		fsl,audmux-port = <1>;
 		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			IMX_AUDMUX_V2_PTCR_TFSDIR |
 			IMX_AUDMUX_V2_PTCR_TFSEL(4) |
 			IMX_AUDMUX_V2_PTCR_TCLKDIR |
 			IMX_AUDMUX_V2_PTCR_TCSEL(4))
@@ -89,7 +90,7 @@  IMX_AUDMUX_V2_PDCR_RXDSEL(4)
 	pins5 {
 		fsl,audmux-port = <4>;
 		fsl,port-config = <
-			0x00000000
+			IMX_AUDMUX_V2_PTCR_SYN
 			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
 		>;
 	};