@@ -83,15 +83,12 @@
};
clk_s_a0_flexgen: clk-s-a0-flexgen {
- compatible = "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih410-a0";
#clock-cells = <1>;
clocks = <&clk_s_a0_pll 0>,
<&clk_sysin>;
-
- clock-output-names = "clk-ic-lmi0",
- "clk-ic-lmi1";
};
};
@@ -132,7 +129,7 @@
clk_s_c0_flexgen: clk-s-c0-flexgen {
#clock-cells = <1>;
- compatible = "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih418-c0";
clocks = <&clk_s_c0_pll0 0>,
<&clk_s_c0_pll1 0>,
@@ -142,49 +139,6 @@
<&clk_s_c0_quadfs 3>,
<&clk_sysin>;
- clock-output-names = "clk-icn-gpu",
- "clk-fdma",
- "clk-nand",
- "clk-hva",
- "clk-proc-stfe",
- "clk-tp",
- "clk-rx-icn-dmu",
- "clk-rx-icn-hva",
- "clk-icn-cpu",
- "clk-tx-icn-dmu",
- "clk-mmc-0",
- "clk-mmc-1",
- "clk-jpegdec",
- "clk-icn-reg",
- "clk-proc-bdisp-0",
- "clk-proc-bdisp-1",
- "clk-pp-dmu",
- "clk-vid-dmu",
- "clk-dss-lpc",
- "clk-st231-aud-0",
- "clk-st231-gp-1",
- "clk-st231-dmu",
- "clk-icn-lmi",
- "clk-tx-icn-1",
- "clk-icn-sbc",
- "clk-stfe-frc2",
- "clk-eth-phyref",
- "clk-eth-ref-phyclk",
- "clk-flash-promip",
- "clk-main-disp",
- "clk-aux-disp",
- "clk-compo-dvp",
- "clk-tx-icn-hades",
- "clk-rx-icn-hades",
- "clk-icn-reg-16",
- "clk-pp-hevc",
- "clk-clust-hevc",
- "clk-hwpe-hevc",
- "clk-fc-hevc",
- "clk-proc-mixer",
- "clk-proc-sc",
- "clk-avsp-hevc";
-
/*
* ARM Peripheral clock for timers
*/
@@ -221,20 +175,13 @@
clk_s_d0_flexgen: clk-s-d0-flexgen {
#clock-cells = <1>;
- compatible = "st,flexgen-audio", "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih410-d0";
clocks = <&clk_s_d0_quadfs 0>,
<&clk_s_d0_quadfs 1>,
<&clk_s_d0_quadfs 2>,
<&clk_s_d0_quadfs 3>,
<&clk_sysin>;
-
- clock-output-names = "clk-pcm-0",
- "clk-pcm-1",
- "clk-pcm-2",
- "clk-spdiff",
- "clk-pcmr10-master",
- "clk-usb2-phy";
};
};
@@ -257,7 +204,7 @@
clk_s_d2_flexgen: clk-s-d2-flexgen {
#clock-cells = <1>;
- compatible = "st,flexgen-video", "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih418-d2";
clocks = <&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>,
@@ -266,30 +213,6 @@
<&clk_sysin>,
<&clk_sysin>,
<&clk_tmdsout_hdmi>;
-
- clock-output-names = "clk-pix-main-disp",
- "",
- "",
- "",
- "",
- "clk-tmds-hdmi-div2",
- "clk-pix-aux-disp",
- "clk-denc",
- "clk-pix-hddac",
- "clk-hddac",
- "clk-sddac",
- "clk-pix-dvo",
- "clk-dvo",
- "clk-pix-hdmi",
- "clk-tmds-hdmi",
- "clk-ref-hdmiphy",
- "", "", "", "", "",
- "", "", "", "", "",
- "", "", "", "", "",
- "", "", "", "", "",
- "", "", "", "", "",
- "", "", "", "", "",
- "", "clk-vp9";
};
};
@@ -312,22 +235,13 @@
clk_s_d3_flexgen: clk-s-d3-flexgen {
#clock-cells = <1>;
- compatible = "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih407-d3";
clocks = <&clk_s_d3_quadfs 0>,
<&clk_s_d3_quadfs 1>,
<&clk_s_d3_quadfs 2>,
<&clk_s_d3_quadfs 3>,
<&clk_sysin>;
-
- clock-output-names = "clk-stfe-frc1",
- "clk-tsout-0",
- "clk-tsout-1",
- "clk-mchi",
- "clk-vsens-compo",
- "clk-frc1-remote",
- "clk-lpc-0",
- "clk-lpc-1";
};
};
};
With the introduction of new flexgen compatible within the clk-flexgen driver, remove the clock-output-names entry from the flexgen nodes and set the new proper compatible corresponding. Signed-off-by: Alain Volmat <avolmat@me.com> --- arch/arm/boot/dts/stih418-clock.dtsi | 96 ++-------------------------- 1 file changed, 5 insertions(+), 91 deletions(-)