diff mbox series

[v8,1/3] arm64: dts: ti: k3-j7200: Add gpio nodes

Message ID 20210324063759.5837-2-a-govindraju@ti.com (mailing list archive)
State New, archived
Headers show
Series J7200: Add support for GPIO and higher speed modes in MMCSD subsystems | expand

Commit Message

Aswath Govindraju March 24, 2021, 6:37 a.m. UTC 
From: Faiz Abbas <faiz_abbas@ti.com>

There are 4 instances of gpio modules in main domain:
	gpio0, gpio2, gpio4 and gpio6

Groups are created to provide protection between different processor
virtual worlds. Each of these modules I/O pins are muxed within the
group. Exactly one module can be selected to control the corresponding
pin by selecting it in the pad mux configuration registers.

This group in main domain pins out 69 lines (5 banks). Add DT modes for
each module instance in the main domain.

Similar to the gpio groups in main domain, there is one gpio group in
wakeup domain with 2 module instances in it.

The gpio group pins out 72 pins (6 banks) of the first 85 gpio lines. Add
DT nodes for each module instance in the wakeup domain.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     | 72 +++++++++++++++++++
 .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      | 34 +++++++++
 2 files changed, 106 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 17477ab0fd8e..e60650a62b14 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -672,6 +672,78 @@ 
 		};
 	};
 
+	main_gpio0: gpio@600000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00600000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <145>, <146>, <147>, <148>,
+			     <149>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#address-cells = <0>;
+		ti,ngpio = <69>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 105 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio2: gpio@610000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00610000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <154>, <155>, <156>, <157>,
+			     <158>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#address-cells = <0>;
+		ti,ngpio = <69>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 107 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio4: gpio@620000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00620000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <163>, <164>, <165>, <166>,
+			     <167>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#address-cells = <0>;
+		ti,ngpio = <69>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 109 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio6: gpio@630000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00630000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <172>, <173>, <174>, <175>,
+			     <176>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#address-cells = <0>;
+		ti,ngpio = <69>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 111 0>;
+		clock-names = "gpio";
+	};
+
 	main_r5fss0: r5fss@5c00000 {
 		compatible = "ti,j7200-r5fss";
 		ti,cluster-mode = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 5408ec815d58..4e4ea7655fe2 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -107,6 +107,40 @@ 
 		ti,interrupt-ranges = <16 960 16>;
 	};
 
+	wkup_gpio0: gpio@42110000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x42110000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&wkup_gpio_intr>;
+		interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#address-cells = <0>;
+		ti,ngpio = <85>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 113 0>;
+		clock-names = "gpio";
+	};
+
+	wkup_gpio1: gpio@42100000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x42100000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&wkup_gpio_intr>;
+		interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#address-cells = <0>;
+		ti,ngpio = <85>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 114 0>;
+		clock-names = "gpio";
+	};
+
 	mcu_navss: bus@28380000 {
 		compatible = "simple-mfd";
 		#address-cells = <2>;