diff mbox series

[v9,03/22] dt-bindings: improve BCM6345 GPIO binding documentation

Message ID 20210324081923.20379-4-noltari@gmail.com (mailing list archive)
State New, archived
Headers show
Series pinctrl: add BCM63XX pincontrol support | expand

Commit Message

Álvaro Fernández Rojas March 24, 2021, 8:19 a.m. UTC 
Convert existing BCM6345 GPIO binding documentation to YAML and add binding
documentation for the GPIO controller found in BCM6318, BCM6328, BCM6358,
BCM6362, BCM6368 and BCM63268 SoCs.

Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 v9: document 32-bit registers and replace gpio-controller with gpio.
 v8: introduce changes suggested by Rob Herring
 v7: new patch, splitted from pinctrl documentation

 .../bindings/gpio/brcm,bcm6345-gpio.txt       | 46 ----------
 .../bindings/gpio/brcm,bcm6345-gpio.yaml      | 86 +++++++++++++++++++
 2 files changed, 86 insertions(+), 46 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt
 create mode 100644 Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml

Comments

Rob Herring March 26, 2021, 8:09 p.m. UTC | #1 
On Wed, 24 Mar 2021 09:19:04 +0100, Álvaro Fernández Rojas wrote:
> Convert existing BCM6345 GPIO binding documentation to YAML and add binding
> documentation for the GPIO controller found in BCM6318, BCM6328, BCM6358,
> BCM6362, BCM6368 and BCM63268 SoCs.
> 
> Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
> ---
>  v9: document 32-bit registers and replace gpio-controller with gpio.
>  v8: introduce changes suggested by Rob Herring
>  v7: new patch, splitted from pinctrl documentation
> 
>  .../bindings/gpio/brcm,bcm6345-gpio.txt       | 46 ----------
>  .../bindings/gpio/brcm,bcm6345-gpio.yaml      | 86 +++++++++++++++++++
>  2 files changed, 86 insertions(+), 46 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt
>  create mode 100644 Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt
deleted file mode 100644
index e7853143fa42..000000000000
--- a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt
+++ /dev/null
@@ -1,46 +0,0 @@ 
-Bindings for the Broadcom's brcm,bcm6345-gpio memory-mapped GPIO controllers.
-
-These bindings can be used on any BCM63xx SoC. However, BCM6338 and BCM6345
-are the only ones which don't need a pinctrl driver.
-BCM6338 have 8-bit data and dirout registers, where GPIO state can be read
-and/or written, and the direction changed from input to output.
-BCM6345 have 16-bit data and dirout registers, where GPIO state can be read
-and/or written, and the direction changed from input to output.
-
-Required properties:
-	- compatible: should be "brcm,bcm6345-gpio"
-	- reg-names: must contain
-		"dat" - data register
-		"dirout" - direction (output) register
-	- reg: address + size pairs describing the GPIO register sets;
-		order must correspond with the order of entries in reg-names
-	- #gpio-cells: must be set to 2. The first cell is the pin number and
-			the second cell is used to specify the gpio polarity:
-			0 = active high
-			1 = active low
-	- gpio-controller: Marks the device node as a gpio controller.
-
-Optional properties:
-	- native-endian: use native endian memory.
-
-Examples:
-	- BCM6338:
-	gpio: gpio-controller@fffe0407 {
-		compatible = "brcm,bcm6345-gpio";
-		reg-names = "dirout", "dat";
-		reg = <0xfffe0407 1>, <0xfffe040f 1>;
-
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-
-	- BCM6345:
-	gpio: gpio-controller@fffe0406 {
-		compatible = "brcm,bcm6345-gpio";
-		reg-names = "dirout", "dat";
-		reg = <0xfffe0406 2>, <0xfffe040a 2>;
-		native-endian;
-
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml
new file mode 100644
index 000000000000..4d69f79df859
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml
@@ -0,0 +1,86 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/brcm,bcm6345-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6345 GPIO controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description: |+
+  Bindings for Broadcom's BCM63xx memory-mapped GPIO controllers.
+
+  These bindings can be used on any BCM63xx SoC. However, BCM6338 and BCM6345
+  are the only ones which don't need a pinctrl driver.
+
+  BCM6338 have 8-bit data and dirout registers, where GPIO state can be read
+  and/or written, and the direction changed from input to output.
+  BCM6345 have 16-bit data and dirout registers, where GPIO state can be read
+  and/or written, and the direction changed from input to output.
+  BCM6318, BCM6328, BCM6358, BCM6362, BCM6368 and BCM63268 have 32-bit data
+  and dirout registers, where GPIO state can be read and/or written, and the
+  direction changed from input to output.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm6318-gpio
+      - brcm,bcm6328-gpio
+      - brcm,bcm6345-gpio
+      - brcm,bcm6358-gpio
+      - brcm,bcm6362-gpio
+      - brcm,bcm6368-gpio
+      - brcm,bcm63268-gpio
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  native-endian: true
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: dirout
+      - const: dat
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@fffe0406 {
+      compatible = "brcm,bcm6345-gpio";
+      reg-names = "dirout", "dat";
+      reg = <0xfffe0406 2>, <0xfffe040a 2>;
+      native-endian;
+
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
+
+  - |
+    gpio@0 {
+      compatible = "brcm,bcm63268-gpio";
+      reg-names = "dirout", "dat";
+      reg = <0x0 0x8>, <0x8 0x8>;
+
+      gpio-controller;
+      gpio-ranges = <&pinctrl 0 0 52>;
+      #gpio-cells = <2>;
+    };