| Message ID | 20210331090659.4169966-1-enric.balletbo@collabora.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [RESEND,1/2] arm64: defconfig: Allow mt8173-based boards to boot from usb | expand |
On Wed, Mar 31, 2021 at 5:07 PM Enric Balletbo i Serra <enric.balletbo@collabora.com> wrote: > > Enable the option necessary to boot mt8173-based boards to boot from > usb devices, like its phy and the regulators needed to have proper > support. > > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> > --- Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org> > This is only a resend rebased on top of mainline to fix some trivial > conflicts. > > arch/arm64/configs/defconfig | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig > index d612f633b771..7b4be3807b6d 100644 > --- a/arch/arm64/configs/defconfig > +++ b/arch/arm64/configs/defconfig > @@ -448,6 +448,7 @@ CONFIG_I2C_GPIO=m > CONFIG_I2C_IMX=y > CONFIG_I2C_IMX_LPI2C=y > CONFIG_I2C_MESON=y > +CONFIG_I2C_MT65XX=y > CONFIG_I2C_MV64XXX=y > CONFIG_I2C_OMAP=y > CONFIG_I2C_OWL=y > @@ -594,6 +595,7 @@ CONFIG_MFD_EXYNOS_LPASS=m > CONFIG_MFD_HI6421_PMIC=y > CONFIG_MFD_HI655X_PMIC=y > CONFIG_MFD_MAX77620=y > +CONFIG_MFD_MT6397=y > CONFIG_MFD_SPMI_PMIC=y > CONFIG_MFD_RK808=y > CONFIG_MFD_SEC_CORE=y > @@ -611,6 +613,8 @@ CONFIG_REGULATOR_HI655X=y > CONFIG_REGULATOR_MAX77620=y > CONFIG_REGULATOR_MAX8973=y > CONFIG_REGULATOR_MP8859=y > +CONFIG_REGULATOR_MT6358=y > +CONFIG_REGULATOR_MT6397=y > CONFIG_REGULATOR_PCA9450=y > CONFIG_REGULATOR_PF8X00=y > CONFIG_REGULATOR_PFUZE100=y > @@ -787,6 +791,7 @@ CONFIG_USB_RENESAS_USBHS_HCD=m > CONFIG_USB_RENESAS_USBHS=m > CONFIG_USB_ACM=m > CONFIG_USB_STORAGE=y > +CONFIG_USB_MTU3=y > CONFIG_USB_MUSB_HDRC=y > CONFIG_USB_MUSB_SUNXI=y > CONFIG_USB_DWC3=y > @@ -988,6 +993,7 @@ CONFIG_OWL_PM_DOMAINS=y > CONFIG_RASPBERRYPI_POWER=y > CONFIG_FSL_DPAA=y > CONFIG_FSL_MC_DPIO=y > +CONFIG_MTK_PMIC_WRAP=y > CONFIG_QCOM_AOSS_QMP=y > CONFIG_QCOM_COMMAND_DB=y > CONFIG_QCOM_GENI_SE=y > @@ -1064,6 +1070,7 @@ CONFIG_PHY_HI6220_USB=y > CONFIG_PHY_HISTB_COMBPHY=y > CONFIG_PHY_HISI_INNO_USB2=y > CONFIG_PHY_MVEBU_CP110_COMPHY=y > +CONFIG_PHY_MTK_TPHY=y > CONFIG_PHY_QCOM_QMP=m > CONFIG_PHY_QCOM_QUSB2=m > CONFIG_PHY_QCOM_USB_HS=y > -- > 2.30.2 >
On 31/03/2021 11:15, Hsin-Yi Wang wrote: > On Wed, Mar 31, 2021 at 5:07 PM Enric Balletbo i Serra > <enric.balletbo@collabora.com> wrote: >> >> Enable the option necessary to boot mt8173-based boards to boot from >> usb devices, like its phy and the regulators needed to have proper >> support. >> >> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> >> --- > Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org> Both patches applied to v5.12-next/defconfig Thanks! > >> This is only a resend rebased on top of mainline to fix some trivial >> conflicts. >> >> arch/arm64/configs/defconfig | 7 +++++++ >> 1 file changed, 7 insertions(+) >> >> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig >> index d612f633b771..7b4be3807b6d 100644 >> --- a/arch/arm64/configs/defconfig >> +++ b/arch/arm64/configs/defconfig >> @@ -448,6 +448,7 @@ CONFIG_I2C_GPIO=m >> CONFIG_I2C_IMX=y >> CONFIG_I2C_IMX_LPI2C=y >> CONFIG_I2C_MESON=y >> +CONFIG_I2C_MT65XX=y >> CONFIG_I2C_MV64XXX=y >> CONFIG_I2C_OMAP=y >> CONFIG_I2C_OWL=y >> @@ -594,6 +595,7 @@ CONFIG_MFD_EXYNOS_LPASS=m >> CONFIG_MFD_HI6421_PMIC=y >> CONFIG_MFD_HI655X_PMIC=y >> CONFIG_MFD_MAX77620=y >> +CONFIG_MFD_MT6397=y >> CONFIG_MFD_SPMI_PMIC=y >> CONFIG_MFD_RK808=y >> CONFIG_MFD_SEC_CORE=y >> @@ -611,6 +613,8 @@ CONFIG_REGULATOR_HI655X=y >> CONFIG_REGULATOR_MAX77620=y >> CONFIG_REGULATOR_MAX8973=y >> CONFIG_REGULATOR_MP8859=y >> +CONFIG_REGULATOR_MT6358=y >> +CONFIG_REGULATOR_MT6397=y >> CONFIG_REGULATOR_PCA9450=y >> CONFIG_REGULATOR_PF8X00=y >> CONFIG_REGULATOR_PFUZE100=y >> @@ -787,6 +791,7 @@ CONFIG_USB_RENESAS_USBHS_HCD=m >> CONFIG_USB_RENESAS_USBHS=m >> CONFIG_USB_ACM=m >> CONFIG_USB_STORAGE=y >> +CONFIG_USB_MTU3=y >> CONFIG_USB_MUSB_HDRC=y >> CONFIG_USB_MUSB_SUNXI=y >> CONFIG_USB_DWC3=y >> @@ -988,6 +993,7 @@ CONFIG_OWL_PM_DOMAINS=y >> CONFIG_RASPBERRYPI_POWER=y >> CONFIG_FSL_DPAA=y >> CONFIG_FSL_MC_DPIO=y >> +CONFIG_MTK_PMIC_WRAP=y >> CONFIG_QCOM_AOSS_QMP=y >> CONFIG_QCOM_COMMAND_DB=y >> CONFIG_QCOM_GENI_SE=y >> @@ -1064,6 +1070,7 @@ CONFIG_PHY_HI6220_USB=y >> CONFIG_PHY_HISTB_COMBPHY=y >> CONFIG_PHY_HISI_INNO_USB2=y >> CONFIG_PHY_MVEBU_CP110_COMPHY=y >> +CONFIG_PHY_MTK_TPHY=y >> CONFIG_PHY_QCOM_QMP=m >> CONFIG_PHY_QCOM_QUSB2=m >> CONFIG_PHY_QCOM_USB_HS=y >> -- >> 2.30.2 >>
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index d612f633b771..7b4be3807b6d 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -448,6 +448,7 @@ CONFIG_I2C_GPIO=m CONFIG_I2C_IMX=y CONFIG_I2C_IMX_LPI2C=y CONFIG_I2C_MESON=y +CONFIG_I2C_MT65XX=y CONFIG_I2C_MV64XXX=y CONFIG_I2C_OMAP=y CONFIG_I2C_OWL=y @@ -594,6 +595,7 @@ CONFIG_MFD_EXYNOS_LPASS=m CONFIG_MFD_HI6421_PMIC=y CONFIG_MFD_HI655X_PMIC=y CONFIG_MFD_MAX77620=y +CONFIG_MFD_MT6397=y CONFIG_MFD_SPMI_PMIC=y CONFIG_MFD_RK808=y CONFIG_MFD_SEC_CORE=y @@ -611,6 +613,8 @@ CONFIG_REGULATOR_HI655X=y CONFIG_REGULATOR_MAX77620=y CONFIG_REGULATOR_MAX8973=y CONFIG_REGULATOR_MP8859=y +CONFIG_REGULATOR_MT6358=y +CONFIG_REGULATOR_MT6397=y CONFIG_REGULATOR_PCA9450=y CONFIG_REGULATOR_PF8X00=y CONFIG_REGULATOR_PFUZE100=y @@ -787,6 +791,7 @@ CONFIG_USB_RENESAS_USBHS_HCD=m CONFIG_USB_RENESAS_USBHS=m CONFIG_USB_ACM=m CONFIG_USB_STORAGE=y +CONFIG_USB_MTU3=y CONFIG_USB_MUSB_HDRC=y CONFIG_USB_MUSB_SUNXI=y CONFIG_USB_DWC3=y @@ -988,6 +993,7 @@ CONFIG_OWL_PM_DOMAINS=y CONFIG_RASPBERRYPI_POWER=y CONFIG_FSL_DPAA=y CONFIG_FSL_MC_DPIO=y +CONFIG_MTK_PMIC_WRAP=y CONFIG_QCOM_AOSS_QMP=y CONFIG_QCOM_COMMAND_DB=y CONFIG_QCOM_GENI_SE=y @@ -1064,6 +1070,7 @@ CONFIG_PHY_HI6220_USB=y CONFIG_PHY_HISTB_COMBPHY=y CONFIG_PHY_HISI_INNO_USB2=y CONFIG_PHY_MVEBU_CP110_COMPHY=y +CONFIG_PHY_MTK_TPHY=y CONFIG_PHY_QCOM_QMP=m CONFIG_PHY_QCOM_QUSB2=m CONFIG_PHY_QCOM_USB_HS=y
Enable the option necessary to boot mt8173-based boards to boot from usb devices, like its phy and the regulators needed to have proper support. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> --- This is only a resend rebased on top of mainline to fix some trivial conflicts. arch/arm64/configs/defconfig | 7 +++++++ 1 file changed, 7 insertions(+)