diff mbox series

[v3] ARM: dts: aspeed: add ASRock E3C246D4I BMC

Message ID 20210401044232.9637-1-zev@bewilderbeest.net (mailing list archive)
State New, archived
Headers show
Series [v3] ARM: dts: aspeed: add ASRock E3C246D4I BMC | expand

Commit Message

Zev Weiss April 1, 2021, 4:42 a.m. UTC 
This is a relatively low-cost AST2500-based Xeon E-2100/E-2200 series
mini-ITX board that we hope can provide a decent platform for OpenBMC
development.

This initial device-tree provides the necessary configuration for
basic BMC functionality such as host power control, serial console and
KVM support, and POST code snooping.

Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
---

Changes since v2:
 - un-bungled filename in dtb-$(CONFIG_ARCH_ASPEED)
Changes since v1:
 - added entry to dtb-$(CONFIG_ARCH_ASPEED)
 - added board to compatible
 - added pinctrl properties to adc
 - split out of mostly-unrelated patch series

 arch/arm/boot/dts/Makefile                    |   1 +
 .../boot/dts/aspeed-bmc-asrock-e3c246d4i.dts  | 202 ++++++++++++++++++
 2 files changed, 203 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts

Comments

Andrew Jeffery April 12, 2021, 2:16 a.m. UTC | #1 
On Thu, 1 Apr 2021, at 15:12, Zev Weiss wrote:
> This is a relatively low-cost AST2500-based Xeon E-2100/E-2200 series
> mini-ITX board that we hope can provide a decent platform for OpenBMC
> development.
> 
> This initial device-tree provides the necessary configuration for
> basic BMC functionality such as host power control, serial console and
> KVM support, and POST code snooping.
> 
> Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
> Reviewed-by: Joel Stanley <joel@jms.id.au>
> ---
> 
> Changes since v2:
>  - un-bungled filename in dtb-$(CONFIG_ARCH_ASPEED)
> Changes since v1:
>  - added entry to dtb-$(CONFIG_ARCH_ASPEED)
>  - added board to compatible
>  - added pinctrl properties to adc
>  - split out of mostly-unrelated patch series
> 
>  arch/arm/boot/dts/Makefile                    |   1 +
>  .../boot/dts/aspeed-bmc-asrock-e3c246d4i.dts  | 202 ++++++++++++++++++
>  2 files changed, 203 insertions(+)
>  create mode 100644 arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 8e5d4ab4e75e..c22151b50ddc 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1406,6 +1406,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
>  	aspeed-bmc-ampere-mtjade.dtb \
>  	aspeed-bmc-arm-centriq2400-rep.dtb \
>  	aspeed-bmc-arm-stardragon4800-rep2.dtb \
> +	aspeed-bmc-asrock-e3c246d4i.dtb \
>  	aspeed-bmc-bytedance-g220a.dtb \
>  	aspeed-bmc-facebook-cmm.dtb \
>  	aspeed-bmc-facebook-galaxy100.dtb \
> diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts 
> b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
> new file mode 100644
> index 000000000000..dcab6e78dfa4
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
> @@ -0,0 +1,202 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/dts-v1/;
> +
> +#include "aspeed-g5.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/i2c/i2c.h>
> +
> +/{
> +	model = "ASRock E3C246D4I BMC";
> +	compatible = "asrock,e3c246d4i-bmc", "aspeed,ast2500";
> +
> +	aliases {
> +		serial4 = &uart5;
> +	};
> +
> +	chosen {
> +		stdout-path = &uart5;
> +		bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
> +	};
> +
> +	memory@80000000 {
> +		reg = <0x80000000 0x20000000>;
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		heartbeat {
> +			/* BMC_HB_LED_N */
> +			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
> +			linux,default-trigger = "timer";
> +		};
> +
> +		system-fault {
> +			/* SYSTEM_FAULT_LED_N */
> +			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
> +			panic-indicator;
> +		};
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +
> +		uid-button {
> +			label = "uid-button";
> +			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
> +			linux,code = <ASPEED_GPIO(F, 1)>;
> +		};
> +	};
> +
> +	iio-hwmon {
> +		compatible = "iio-hwmon";
> +		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
> +			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
> +			<&adc 10>, <&adc 11>, <&adc 12>;
> +	};
> +};
> +
> +&fmc {
> +	status = "okay";
> +	flash@0 {
> +		status = "okay";
> +		m25p,fast-read;
> +		label = "bmc";
> +		spi-max-frequency = <100000000>; /* 100 MHz */
> +#include "openbmc-flash-layout.dtsi"
> +	};
> +};
> +
> +&uart5 {
> +	status = "okay";
> +};
> +
> +&vuart {
> +	status = "okay";
> +	aspeed,sirq-active-high;

This should probably go away, but otherwise,

Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Joel Stanley April 12, 2021, 2:20 a.m. UTC | #2 
On Mon, 12 Apr 2021 at 02:16, Andrew Jeffery <andrew@aj.id.au> wrote:
> On Thu, 1 Apr 2021, at 15:12, Zev Weiss wrote:

> > +&vuart {
> > +     status = "okay";
> > +     aspeed,sirq-active-high;
>
> This should probably go away, but otherwise,

Zev, this has already been merged (both to mainline for v5.13 and in
openbmc), so any fixups need to come as patches on top of the existing
code.

Cheers,

Joel
Zev Weiss April 12, 2021, 2:42 a.m. UTC | #3 
On Sun, Apr 11, 2021 at 09:20:59PM CDT, Joel Stanley wrote:
>On Mon, 12 Apr 2021 at 02:16, Andrew Jeffery <andrew@aj.id.au> wrote:
>> On Thu, 1 Apr 2021, at 15:12, Zev Weiss wrote:
>
>> > +&vuart {
>> > +     status = "okay";
>> > +     aspeed,sirq-active-high;
>>
>> This should probably go away, but otherwise,
>
>Zev, this has already been merged (both to mainline for v5.13 and in
>openbmc), so any fixups need to come as patches on top of the existing
>code.
>

Got it, thanks -- I figured I'd wait until the DT-properties patches got 
approved & merged (I'll be sending v6 of that shortly) and then send an 
incremental update for the e3c246d4i dts to match the final form of 
those.


Zev
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 8e5d4ab4e75e..c22151b50ddc 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1406,6 +1406,7 @@  dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-ampere-mtjade.dtb \
 	aspeed-bmc-arm-centriq2400-rep.dtb \
 	aspeed-bmc-arm-stardragon4800-rep2.dtb \
+	aspeed-bmc-asrock-e3c246d4i.dtb \
 	aspeed-bmc-bytedance-g220a.dtb \
 	aspeed-bmc-facebook-cmm.dtb \
 	aspeed-bmc-facebook-galaxy100.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
new file mode 100644
index 000000000000..dcab6e78dfa4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
@@ -0,0 +1,202 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/{
+	model = "ASRock E3C246D4I BMC";
+	compatible = "asrock,e3c246d4i-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			/* BMC_HB_LED_N */
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		system-fault {
+			/* SYSTEM_FAULT_LED_N */
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			panic-indicator;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		uid-button {
+			label = "uid-button";
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 1)>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <100000000>; /* 100 MHz */
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,sirq-active-high;
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* thermal sensor, one diode run to a disconnected header */
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* FRU EEPROM */
+	eeprom@57 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "BMC_MAC1_INTB", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI",
+			"", "", "", "",
+		/*  B */ "", "", "", "", "", "IRQ_BMC_PCH_SMI_LPC_N", "", "",
+		/*  C */ "", "", "", "", "", "", "", "",
+		/*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
+			"", "", "", "",
+		/*  E */ "", "", "", "", "", "", "", "",
+		/*  F */ "LOCATORLED_STATUS_N", "LOCATORBTN", "", "",
+			"", "", "BMC_PCH_SCI_LPC", "BMC_NCSI_MUX_CTL",
+		/*  G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
+			"BMC_ALERT1_N_R", "BMC_ALERT2_N_R", "BMC_ALERT3_N", "SML0ALERT",
+		/*  H */ "FM_ME_RCVR_N", "O_PWROK", "SKL_CNL_R", "D4_DIMM_EVENT_3V_N",
+			"MFG_MODE_N", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "BMC_SMI", "",
+			"", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "BMC_CTS1", "BMC_DCD1", "BMC_DSR1", "BMC_RI1",
+			"BMC_DTR1", "BMC_RTS1", "BMC_TXD1", "BMC_RXD1",
+		/*  M */ "BMC_LAN0_DIS_N", "BMC_LAN1_DIS_N", "", "",
+			"", "", "", "",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "",
+			"BMC_SBM_PRESENT_1_N", "BMC_SBM_PRESENT_2_N",
+			"BMC_SBM_PRESENT_3_N", "BMC_PCIE_WAKE_N",
+		/*  R */ "", "", "", "", "", "", "", "",
+		/*  S */ "PCHHOT_BMC_N", "", "RSMRST",
+			"", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "PS_PWROK", /* dummy always-high signal */
+			"", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "SLP_S3", "SLP_S5", "", "", "", "", "", "",
+		/*  Z */ "CPU_CATERR_BMC_PCH_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "CPU1_THERMTRIP_LATCH_N", "", "CPU1_PROCHOT_N", "",
+			"", "", "IRQ_SMI_ACTIVE_N", "FM_BIOS_POST_CMPLT_N",
+		/* AB */ "", "", "ME_OVERRIDE", "BMC_DMI_MODIFY",
+			"", "", "", "",
+		/* AC */ "LAD0", "LAD1", "LAD2", "LAD3",
+			"CK_33M_BMC", "LFRAME", "SERIRQ", "S_PLTRST";
+
+	/* Assert BMC_READY so BIOS doesn't sit around waiting for it */
+	bmc-ready {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};