@@ -8,6 +8,7 @@
*/
/dts-v1/;
#include "sam9x60.dtsi"
+#include <dt-bindings/input/input.h>
/ {
model = "Microchip SAM9X60-EK";
@@ -84,7 +85,7 @@ gpio_keys {
sw1 {
label = "SW1";
gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
- linux,code=<0x104>;
+ linux,code=<KEY_PROG1>;
wakeup-source;
};
};
@@ -11,6 +11,7 @@
#include "at91-sama5d27_som1.dtsi"
#include <dt-bindings/mfd/atmel-flexcom.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "Atmel SAMA5D27 SOM1 EK";
@@ -466,7 +467,7 @@ gpio_keys {
pb4 {
label = "USER";
gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
- linux,code = <0x104>;
+ linux,code = <KEY_PROG1>;
wakeup-source;
};
};
@@ -8,6 +8,7 @@
*/
/dts-v1/;
#include "at91-sama5d27_wlsom1.dtsi"
+#include <dt-bindings/input/input.h>
/ {
model = "Microchip SAMA5D27 WLSOM1 EK";
@@ -35,7 +36,7 @@ gpio_keys {
sw4 {
label = "USER BUTTON";
gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
- linux,code = <0x104>;
+ linux,code = <KEY_PROG1>;
wakeup-source;
};
};
@@ -12,6 +12,7 @@
#include "sama5d2.dtsi"
#include "sama5d2-pinfunc.h"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/mfd/atmel-flexcom.h>
/ {
@@ -51,7 +52,7 @@ gpio_keys {
sw4 {
label = "USER_PB1";
gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>;
- linux,code = <0x104>;
+ linux,code = <KEY_PROG1>;
wakeup-source;
};
};
@@ -11,6 +11,7 @@
#include "sama5d2-pinfunc.h"
#include <dt-bindings/mfd/atmel-flexcom.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/at91.h>
/ {
@@ -402,7 +403,7 @@ gpio_keys {
bp1 {
label = "PB_USER";
gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
- linux,code = <0x104>;
+ linux,code = <KEY_PROG1>;
wakeup-source;
};
};
@@ -10,6 +10,7 @@
#include "sama5d2-pinfunc.h"
#include <dt-bindings/mfd/atmel-flexcom.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/regulator/active-semi,8945a-regulator.h>
/ {
@@ -712,7 +713,7 @@ gpio_keys {
bp1 {
label = "PB_USER";
gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
- linux,code = <0x104>;
+ linux,code = <KEY_PROG1>;
wakeup-source;
};
};
@@ -7,6 +7,7 @@
*/
/dts-v1/;
#include "sama5d36.dtsi"
+#include <dt-bindings/input/input.h>
/ {
model = "SAMA5D3 Xplained";
@@ -354,7 +355,7 @@ gpio_keys {
bp3 {
label = "PB_USER";
gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
- linux,code = <0x104>;
+ linux,code = <KEY_PROG1>;
wakeup-source;
};
};
@@ -7,6 +7,7 @@
*/
/dts-v1/;
#include "at91sam9260.dtsi"
+#include <dt-bindings/input/input.h>
/ {
model = "Atmel at91sam9260ek";
@@ -156,7 +157,7 @@ btn3 {
btn4 {
label = "Button 4";
gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
- linux,code = <0x104>;
+ linux,code = <KEY_PROG1>;
wakeup-source;
};
};
@@ -5,6 +5,7 @@
* Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*/
#include "at91sam9g20.dtsi"
+#include <dt-bindings/input/input.h>
/ {
@@ -234,7 +235,7 @@ btn3 {
btn4 {
label = "Button 4";
gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
- linux,code = <0x104>;
+ linux,code = <KEY_PROG1>;
wakeup-source;
};
};