diff mbox series

[v2,3/7] net: phy: at803x: AR8085 & AR9331: add loopback support

Message ID 20210415130738.19603-4-o.rempel@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series provide generic net selftest support | expand

Commit Message

Oleksij Rempel April 15, 2021, 1:07 p.m. UTC 
PHY loopback is needed for the ethernet controller self test support.
This PHY was tested with the generic net sefltest in combination with
FEC ethernet controller and AR9331 switch.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/phy/at803x.c | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index d7799beb811c..f74f427a8da5 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1128,6 +1128,7 @@  static struct phy_driver at803x_driver[] = {
 	.get_wol		= at803x_get_wol,
 	.suspend		= at803x_suspend,
 	.resume			= at803x_resume,
+	.set_loopback		= genphy_loopback,
 	/* PHY_GBIT_FEATURES */
 	.read_status		= at803x_read_status,
 	.config_intr		= at803x_config_intr,
@@ -1207,6 +1208,7 @@  static struct phy_driver at803x_driver[] = {
 	.read_status		= at803x_read_status,
 	.soft_reset		= genphy_soft_reset,
 	.config_aneg		= at803x_config_aneg,
+	.set_loopback		= genphy_loopback,
 } };
 
 module_phy_driver(at803x_driver);