[v3,05/11] clk: stm32mp1: move RCC reset controller into RCC clock driver

Commit Message

Gabriel FERNANDEZ April 19, 2021, 9:38 a.m. UTC

From: Gabriel Fernandez <[e-mail]>

RCC clock and reset controller shared same memory mapping.
As RCC clock driver is now a module, the best way to register clock
and reset controller is to do it in same driver.

Signed-off-by: Gabriel Fernandez <[e-mail]>
---
 drivers/clk/clk-stm32mp1.c | 157 ++++++++++++++++++++++++++++++++++---
 1 file changed, 144 insertions(+), 13 deletions(-)

Patch

diff --git a/drivers/clk/clk-stm32mp1.c b/drivers/clk/clk-stm32mp1.c
index e2e9331f1cba..6d3a36f81b2d 100644
--- a/drivers/clk/clk-stm32mp1.c
+++ b/drivers/clk/clk-stm32mp1.c
@@ -14,6 +14,7 @@ 
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
+#include <linux/reset-controller.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 
@@ -2055,16 +2056,18 @@  static const struct clock_config stm32mp1_clock_cfg[] = {
 		  _DIV(RCC_DBGCFGR, 0, 3, 0, ck_trace_div_table)),
 };
 
-struct stm32_clock_match_data {
+struct stm32_rcc_match_data {
 	const struct clock_config *cfg;
 	unsigned int num;
 	unsigned int maxbinding;
+	u32 clear_offset;
 };
 
-static struct stm32_clock_match_data stm32mp1_data = {
+static struct stm32_rcc_match_data stm32mp1_data = {
 	.cfg		= stm32mp1_clock_cfg,
 	.num		= ARRAY_SIZE(stm32mp1_clock_cfg),
 	.maxbinding	= STM32MP1_LAST_CLK,
+	.clear_offset	= RCC_CLR,
 };
 
 static const struct of_device_id stm32mp1_match_data[] = {
@@ -2100,23 +2103,122 @@  static int stm32_register_hw_clk(struct device *dev,
 	return 0;
 }
 
-static int stm32_rcc_init(struct device *dev, void __iomem *base,
-			  const struct of_device_id *match_data)
+#define STM32_RESET_ID_MASK GENMASK(15, 0)
+
+struct stm32_reset_data {
+	/* reset lock */
+	spinlock_t			lock;
+	struct reset_controller_dev	rcdev;
+	void __iomem			*membase;
+	u32				clear_offset;
+};
+
+static inline struct stm32_reset_data *
+to_stm32_reset_data(struct reset_controller_dev *rcdev)
 {
-	struct clk_hw_onecell_data *clk_data;
-	struct clk_hw **hws;
-	const struct of_device_id *match;
-	const struct stm32_clock_match_data *data;
-	int err, n, max_binding;
+	return container_of(rcdev, struct stm32_reset_data, rcdev);
+}
 
-	match = of_match_node(match_data, dev_of_node(dev));
-	if (!match) {
-		dev_err(dev, "match data not found\n");
-		return -ENODEV;
+static int stm32_reset_update(struct reset_controller_dev *rcdev,
+			      unsigned long id, bool assert)
+{
+	struct stm32_reset_data *data = to_stm32_reset_data(rcdev);
+	int reg_width = sizeof(u32);
+	int bank = id / (reg_width * BITS_PER_BYTE);
+	int offset = id % (reg_width * BITS_PER_BYTE);
+
+	if (data->clear_offset) {
+		void __iomem *addr;
+
+		addr = data->membase + (bank * reg_width);
+		if (!assert)
+			addr += data->clear_offset;
+
+		writel(BIT(offset), addr);
+
+	} else {
+		unsigned long flags;
+		u32 reg;
+
+		spin_lock_irqsave(&data->lock, flags);
+
+		reg = readl(data->membase + (bank * reg_width));
+
+		if (assert)
+			reg |= BIT(offset);
+		else
+			reg &= ~BIT(offset);
+
+		writel(reg, data->membase + (bank * reg_width));
+
+		spin_unlock_irqrestore(&data->lock, flags);
 	}
 
+	return 0;
+}
+
+static int stm32_reset_assert(struct reset_controller_dev *rcdev,
+			      unsigned long id)
+{
+	return stm32_reset_update(rcdev, id, true);
+}
+
+static int stm32_reset_deassert(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	return stm32_reset_update(rcdev, id, false);
+}
+
+static int stm32_reset_status(struct reset_controller_dev *rcdev,
+			      unsigned long id)
+{
+	struct stm32_reset_data *data = to_stm32_reset_data(rcdev);
+	int reg_width = sizeof(u32);
+	int bank = id / (reg_width * BITS_PER_BYTE);
+	int offset = id % (reg_width * BITS_PER_BYTE);
+	u32 reg;
+
+	reg = readl(data->membase + (bank * reg_width));
+
+	return !!(reg & BIT(offset));
+}
+
+static const struct reset_control_ops stm32_reset_ops = {
+	.assert		= stm32_reset_assert,
+	.deassert	= stm32_reset_deassert,
+	.status		= stm32_reset_status,
+};
+
+static int stm32_rcc_reset_init(struct device *dev, void __iomem *base,
+				const struct of_device_id *match)
+{
+	const struct stm32_rcc_match_data *data = match->data;
+	struct stm32_reset_data *reset_data = NULL;
+
 	data = match->data;
 
+	reset_data = kzalloc(sizeof(*reset_data), GFP_KERNEL);
+	if (!reset_data)
+		return -ENOMEM;
+
+	reset_data->membase = base;
+	reset_data->rcdev.owner = THIS_MODULE;
+	reset_data->rcdev.ops = &stm32_reset_ops;
+	reset_data->rcdev.of_node = dev_of_node(dev);
+	reset_data->rcdev.nr_resets = STM32_RESET_ID_MASK;
+	reset_data->clear_offset = data->clear_offset;
+
+	return reset_controller_register(&reset_data->rcdev);
+}
+
+static int stm32_rcc_clock_init(struct device *dev, void __iomem *base,
+				const struct of_device_id *match)
+{
+	const struct stm32_rcc_match_data *data = match->data;
+	struct clk_hw_onecell_data *clk_data;
+	struct clk_hw **hws;
+	int err, n, max_binding;
+
 	max_binding =  data->maxbinding;
 
 	clk_data = devm_kzalloc(dev, struct_size(clk_data, hws, max_binding),
@@ -2145,6 +2247,35 @@  static int stm32_rcc_init(struct device *dev, void __iomem *base,
 	return of_clk_add_hw_provider(dev_of_node(dev), of_clk_hw_onecell_get, clk_data);
 }
 
+static int stm32_rcc_init(struct device *dev, void __iomem *base,
+			  const struct of_device_id *match_data)
+{
+	const struct of_device_id *match;
+	int err;
+
+	match = of_match_node(match_data, dev_of_node(dev));
+	if (!match) {
+		dev_err(dev, "match data not found\n");
+		return -ENODEV;
+	}
+
+	/* RCC Reset Configuration */
+	err = stm32_rcc_reset_init(dev, base, match);
+	if (err) {
+		pr_err("stm32mp1 reset failed to initialize\n");
+		return err;
+	}
+
+	/* RCC Clock Configuration */
+	err = stm32_rcc_clock_init(dev, base, match);
+	if (err) {
+		pr_err("stm32mp1 clock failed to initialize\n");
+		return err;
+	}
+
+	return 0;
+}
+
 static int stm32mp1_rcc_init(struct device *dev)
 {
 	void __iomem *base;