| Message ID | 20210510040704.14997-5-peng.fan@oss.nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | soc: imx: add i.MX BLK-CTL support | expand |
On 21-05-10 12:07:04, Peng Fan (OSS) wrote: > From: Peng Fan <peng.fan@nxp.com> > > The i.MX8MM SoC has dispmix BLK-CTL and vpumix BLK-CTL, so we add > that support in this driver. > > Reviewed-by: Abel Vesa <abel.vesa@nxp.com> > Signed-off-by: Peng Fan <peng.fan@nxp.com> > --- > drivers/soc/imx/Makefile | 2 +- > drivers/soc/imx/blk-ctl-imx8mm.c | 138 +++++++++++++++++++++++++++++++ > 2 files changed, 139 insertions(+), 1 deletion(-) > create mode 100644 drivers/soc/imx/blk-ctl-imx8mm.c > > diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile > index d3d2b49a386c..c260b962f495 100644 > --- a/drivers/soc/imx/Makefile > +++ b/drivers/soc/imx/Makefile > @@ -4,4 +4,4 @@ obj-$(CONFIG_ARCH_MXC) += soc-imx.o > endif > obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o > obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o > -obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o blk-ctl.o > +obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o blk-ctl.o blk-ctl-imx8mm.o > diff --git a/drivers/soc/imx/blk-ctl-imx8mm.c b/drivers/soc/imx/blk-ctl-imx8mm.c > new file mode 100644 > index 000000000000..5ca8d6c52917 > --- /dev/null > +++ b/drivers/soc/imx/blk-ctl-imx8mm.c > @@ -0,0 +1,138 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright 2021 NXP > + */ > + > +#include <dt-bindings/clock/imx8mm-clock.h> > +#include <dt-bindings/power/imx8mm-power.h> > +#include <linux/clk.h> > +#include <linux/err.h> > +#include <linux/io.h> > +#include <linux/module.h> > +#include <linux/mutex.h> > +#include <linux/of_address.h> > +#include <linux/of_device.h> > +#include <linux/platform_device.h> > +#include <linux/slab.h> > +#include <linux/types.h> > +#include <linux/pm_domain.h> > +#include <linux/regmap.h> > + > +#include "blk-ctl.h" > + > +#define MEDIA_BLK_BUS_RSTN_BLK_SYNC_SFT_EN BIT(6) > +#define MEDIA_BLK_MIPI_DSI_I_PRESETN_SFT_EN BIT(5) > +#define MEDIA_BLK_MIPI_CSI_I_PRESETN_SFT_EN BIT(4) > +#define MEDIA_BLK_CAMERA_PIXEL_RESET_N_SFT_EN BIT(3) > +#define MEDIA_BLK_CSI_BRIDGE_SFT_EN GENMASK(2, 0) > + > +#define MEDIA_BLK_BUS_PD_MASK BIT(12) > +#define MEDIA_BLK_MIPI_CSI_PD_MASK GENMASK(11, 10) > +#define MEDIA_BLK_MIPI_DSI_PD_MASK GENMASK(9, 8) > +#define MEDIA_BLK_LCDIF_PD_MASK GENMASK(7, 6) > +#define MEDIA_BLK_CSI_BRIDGE_PD_MASK GENMASK(5, 0) > + > +static struct imx_blk_ctl_hw imx8mm_dispmix_blk_ctl_pds[] = { > + IMX_BLK_CTL_PD("CSI_BRIDGE", "dispmix", IMX8MM_BLK_CTL_PD_DISPMIX_CSI_BRIDGE, 0x4, > + MEDIA_BLK_CSI_BRIDGE_PD_MASK, 0, MEDIA_BLK_CSI_BRIDGE_SFT_EN, > + IMX_BLK_CTL_PD_RESET), > + IMX_BLK_CTL_PD("LCDIF", "dispmix", IMX8MM_BLK_CTL_PD_DISPMIX_LCDIF, 0x4, > + MEDIA_BLK_LCDIF_PD_MASK, -1, -1, 0), > + IMX_BLK_CTL_PD("MIPI_DSI", "mipi", IMX8MM_BLK_CTL_PD_DISPMIX_MIPI_DSI, 0x4, > + MEDIA_BLK_MIPI_DSI_PD_MASK, 0, MEDIA_BLK_MIPI_DSI_I_PRESETN_SFT_EN, > + IMX_BLK_CTL_PD_RESET), > + IMX_BLK_CTL_PD("MIPI_CSI", "mipi", IMX8MM_BLK_CTL_PD_DISPMIX_MIPI_CSI, 0x4, > + MEDIA_BLK_MIPI_CSI_PD_MASK, 0, > + MEDIA_BLK_MIPI_CSI_I_PRESETN_SFT_EN | MEDIA_BLK_CAMERA_PIXEL_RESET_N_SFT_EN, > + IMX_BLK_CTL_PD_RESET) > +}; > + > +static struct imx_blk_ctl_hw imx8mm_vpumix_blk_ctl_pds[] = { > + IMX_BLK_CTL_PD("VPU_BLK_CTL_G2", "vpu-g2", IMX8MM_BLK_CTL_PD_VPU_G2, 0x4, > + BIT(0), 0, BIT(0), IMX_BLK_CTL_PD_RESET), > + IMX_BLK_CTL_PD("VPU_BLK_CTL_G1", "vpu-g1", IMX8MM_BLK_CTL_PD_VPU_G1, 0x4, > + BIT(1), 0, BIT(1), IMX_BLK_CTL_PD_RESET), > + IMX_BLK_CTL_PD("VPU_BLK_CTL_H1", "vpu-h1", IMX8MM_BLK_CTL_PD_VPU_H1, 0x4, > + BIT(2), 0, BIT(2), IMX_BLK_CTL_PD_HANDSHAKE | IMX_BLK_CTL_PD_RESET), > +}; > + > +static const struct regmap_config imx8mm_blk_ctl_regmap_config = { > + .reg_bits = 32, > + .reg_stride = 4, > + .val_bits = 32, > + .max_register = 0x30, > + .fast_io = true, > +}; > + > +static const struct imx_blk_ctl_dev_data imx8mm_vpumix_blk_ctl_dev_data = { > + .pds = imx8mm_vpumix_blk_ctl_pds, > + .pds_num = ARRAY_SIZE(imx8mm_vpumix_blk_ctl_pds), > + .hw_hsk = IMX_BLK_CTL_PD(NULL, NULL, IMX8MM_BLK_CTL_PD_VPU_H1, 0x4, BIT(2), 0, BIT(2), > + IMX_BLK_CTL_PD_HANDSHAKE), > + .config = imx8mm_blk_ctl_regmap_config, > + .active_pd_names = (char*[]){"vpumix", "g1", "g2", "h1"}, > + .num_active_pd = 4, > +}; > + > +static const struct imx_blk_ctl_dev_data imx8mm_dispmix_blk_ctl_dev_data = { > + .pds = imx8mm_dispmix_blk_ctl_pds, > + .pds_num = ARRAY_SIZE(imx8mm_dispmix_blk_ctl_pds), > + .hw_hsk = IMX_BLK_CTL_PD(NULL, NULL, -1, 0x4, MEDIA_BLK_BUS_PD_MASK, 0, > + MEDIA_BLK_BUS_RSTN_BLK_SYNC_SFT_EN, > + IMX_BLK_CTL_PD_HANDSHAKE | IMX_BLK_CTL_PD_RESET), > + .config = imx8mm_blk_ctl_regmap_config, > + .active_pd_names = (char*[]){"dispmix", "mipi"}, > + .num_active_pd = 2, > +}; > + > +static int imx8mm_blk_ctl_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + const struct imx_blk_ctl_dev_data *dev_data = of_device_get_match_data(dev); > + struct regmap *regmap; > + struct imx_blk_ctl *ctl; > + void __iomem *base; > + > + ctl = devm_kzalloc(dev, sizeof(*ctl), GFP_KERNEL); > + if (!ctl) > + return -ENOMEM; > + > + base = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(base)) > + return PTR_ERR(base); > + > + regmap = devm_regmap_init_mmio(dev, base, &dev_data->config); > + if (IS_ERR(regmap)) > + return PTR_ERR(regmap); > + > + ctl->regmap = regmap; > + ctl->dev = dev; > + ctl->power_count = 0; > + mutex_init(&ctl->lock); > + > + ctl->num_clks = devm_clk_bulk_get_all(dev, &ctl->clks); > + if (ctl->num_clks < 0) > + return ctl->num_clks; > + > + dev_set_drvdata(dev, ctl); > + ctl->dev_data = dev_data; > + > + return imx_blk_ctl_register(dev); > +} Nitpick: Pretty sure all the other platforms will have a similar probe function. So maybe we can move this into the generic and call it imx8_blk_ctl_register and pass on the PDs, dev data and regmap_config. We could also do this later on when i.MX8MP variant will be done. > + > +static const struct of_device_id imx_blk_ctl_of_match[] = { > + { .compatible = "fsl,imx8mm-vpumix-blk-ctl", .data = &imx8mm_vpumix_blk_ctl_dev_data }, > + { .compatible = "fsl,imx8mm-dispmix-blk-ctl", .data = &imx8mm_dispmix_blk_ctl_dev_data }, > + { /* Sentinel */ } > +}; > +MODULE_DEVICE_TABLE(of, imx_blk_ctl_of_match); > + > +static struct platform_driver imx_blk_ctl_driver = { > + .probe = imx8mm_blk_ctl_probe, > + .driver = { > + .name = "imx8mm-blk-ctl", > + .of_match_table = of_match_ptr(imx_blk_ctl_of_match), > + .pm = &imx_blk_ctl_pm_ops, > + }, > +}; > +module_platform_driver(imx_blk_ctl_driver); > -- > 2.30.0 >
> Subject: Re: [PATCH V4 4/4] soc: imx: Add blk-ctl driver for i.MX8MM > > On 21-05-10 12:07:04, Peng Fan (OSS) wrote: > > From: Peng Fan <peng.fan@nxp.com> > > > > The i.MX8MM SoC has dispmix BLK-CTL and vpumix BLK-CTL, so we add > that > > support in this driver. > > > > Reviewed-by: Abel Vesa <abel.vesa@nxp.com> > > Signed-off-by: Peng Fan <peng.fan@nxp.com> > > --- > > drivers/soc/imx/Makefile | 2 +- > > drivers/soc/imx/blk-ctl-imx8mm.c | 138 > > +++++++++++++++++++++++++++++++ > > 2 files changed, 139 insertions(+), 1 deletion(-) create mode 100644 > > drivers/soc/imx/blk-ctl-imx8mm.c > > > > diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile index > > d3d2b49a386c..c260b962f495 100644 > > --- a/drivers/soc/imx/Makefile > > +++ b/drivers/soc/imx/Makefile > > @@ -4,4 +4,4 @@ obj-$(CONFIG_ARCH_MXC) += soc-imx.o endif > > obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o > > obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o > > -obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o blk-ctl.o > > +obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o blk-ctl.o blk-ctl-imx8mm.o > > diff --git a/drivers/soc/imx/blk-ctl-imx8mm.c > > b/drivers/soc/imx/blk-ctl-imx8mm.c > > new file mode 100644 > > index 000000000000..5ca8d6c52917 > > --- /dev/null > > +++ b/drivers/soc/imx/blk-ctl-imx8mm.c > > @@ -0,0 +1,138 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Copyright 2021 NXP > > + */ > > + > > +#include <dt-bindings/clock/imx8mm-clock.h> > > +#include <dt-bindings/power/imx8mm-power.h> > > +#include <linux/clk.h> > > +#include <linux/err.h> > > +#include <linux/io.h> > > +#include <linux/module.h> > > +#include <linux/mutex.h> > > +#include <linux/of_address.h> > > +#include <linux/of_device.h> > > +#include <linux/platform_device.h> > > +#include <linux/slab.h> > > +#include <linux/types.h> > > +#include <linux/pm_domain.h> > > +#include <linux/regmap.h> > > + > > +#include "blk-ctl.h" > > + > > +#define MEDIA_BLK_BUS_RSTN_BLK_SYNC_SFT_EN BIT(6) > > +#define MEDIA_BLK_MIPI_DSI_I_PRESETN_SFT_EN BIT(5) > > +#define MEDIA_BLK_MIPI_CSI_I_PRESETN_SFT_EN BIT(4) > > +#define MEDIA_BLK_CAMERA_PIXEL_RESET_N_SFT_EN > BIT(3) > > +#define MEDIA_BLK_CSI_BRIDGE_SFT_EN GENMASK(2, > 0) > > + > > +#define MEDIA_BLK_BUS_PD_MASK BIT(12) > > +#define MEDIA_BLK_MIPI_CSI_PD_MASK GENMASK(11, > 10) > > +#define MEDIA_BLK_MIPI_DSI_PD_MASK GENMASK(9, > 8) > > +#define MEDIA_BLK_LCDIF_PD_MASK GENMASK(7, > 6) > > +#define MEDIA_BLK_CSI_BRIDGE_PD_MASK GENMASK(5, > 0) > > + > > +static struct imx_blk_ctl_hw imx8mm_dispmix_blk_ctl_pds[] = { > > + IMX_BLK_CTL_PD("CSI_BRIDGE", "dispmix", > IMX8MM_BLK_CTL_PD_DISPMIX_CSI_BRIDGE, 0x4, > > + MEDIA_BLK_CSI_BRIDGE_PD_MASK, 0, > MEDIA_BLK_CSI_BRIDGE_SFT_EN, > > + IMX_BLK_CTL_PD_RESET), > > + IMX_BLK_CTL_PD("LCDIF", "dispmix", > IMX8MM_BLK_CTL_PD_DISPMIX_LCDIF, 0x4, > > + MEDIA_BLK_LCDIF_PD_MASK, -1, -1, 0), > > + IMX_BLK_CTL_PD("MIPI_DSI", "mipi", > IMX8MM_BLK_CTL_PD_DISPMIX_MIPI_DSI, 0x4, > > + MEDIA_BLK_MIPI_DSI_PD_MASK, 0, > MEDIA_BLK_MIPI_DSI_I_PRESETN_SFT_EN, > > + IMX_BLK_CTL_PD_RESET), > > + IMX_BLK_CTL_PD("MIPI_CSI", "mipi", > IMX8MM_BLK_CTL_PD_DISPMIX_MIPI_CSI, 0x4, > > + MEDIA_BLK_MIPI_CSI_PD_MASK, 0, > > + MEDIA_BLK_MIPI_CSI_I_PRESETN_SFT_EN | > MEDIA_BLK_CAMERA_PIXEL_RESET_N_SFT_EN, > > + IMX_BLK_CTL_PD_RESET) > > +}; > > + > > +static struct imx_blk_ctl_hw imx8mm_vpumix_blk_ctl_pds[] = { > > + IMX_BLK_CTL_PD("VPU_BLK_CTL_G2", "vpu-g2", > IMX8MM_BLK_CTL_PD_VPU_G2, 0x4, > > + BIT(0), 0, BIT(0), IMX_BLK_CTL_PD_RESET), > > + IMX_BLK_CTL_PD("VPU_BLK_CTL_G1", "vpu-g1", > IMX8MM_BLK_CTL_PD_VPU_G1, 0x4, > > + BIT(1), 0, BIT(1), IMX_BLK_CTL_PD_RESET), > > + IMX_BLK_CTL_PD("VPU_BLK_CTL_H1", "vpu-h1", > IMX8MM_BLK_CTL_PD_VPU_H1, 0x4, > > + BIT(2), 0, BIT(2), IMX_BLK_CTL_PD_HANDSHAKE | > > +IMX_BLK_CTL_PD_RESET), }; > > + > > +static const struct regmap_config imx8mm_blk_ctl_regmap_config = { > > + .reg_bits = 32, > > + .reg_stride = 4, > > + .val_bits = 32, > > + .max_register = 0x30, > > + .fast_io = true, > > +}; > > + > > +static const struct imx_blk_ctl_dev_data > imx8mm_vpumix_blk_ctl_dev_data = { > > + .pds = imx8mm_vpumix_blk_ctl_pds, > > + .pds_num = ARRAY_SIZE(imx8mm_vpumix_blk_ctl_pds), > > + .hw_hsk = IMX_BLK_CTL_PD(NULL, NULL, > IMX8MM_BLK_CTL_PD_VPU_H1, 0x4, BIT(2), 0, BIT(2), > > + IMX_BLK_CTL_PD_HANDSHAKE), > > + .config = imx8mm_blk_ctl_regmap_config, > > + .active_pd_names = (char*[]){"vpumix", "g1", "g2", "h1"}, > > + .num_active_pd = 4, > > +}; > > + > > +static const struct imx_blk_ctl_dev_data > imx8mm_dispmix_blk_ctl_dev_data = { > > + .pds = imx8mm_dispmix_blk_ctl_pds, > > + .pds_num = ARRAY_SIZE(imx8mm_dispmix_blk_ctl_pds), > > + .hw_hsk = IMX_BLK_CTL_PD(NULL, NULL, -1, 0x4, > MEDIA_BLK_BUS_PD_MASK, 0, > > + MEDIA_BLK_BUS_RSTN_BLK_SYNC_SFT_EN, > > + IMX_BLK_CTL_PD_HANDSHAKE | > IMX_BLK_CTL_PD_RESET), > > + .config = imx8mm_blk_ctl_regmap_config, > > + .active_pd_names = (char*[]){"dispmix", "mipi"}, > > + .num_active_pd = 2, > > +}; > > + > > +static int imx8mm_blk_ctl_probe(struct platform_device *pdev) { > > + struct device *dev = &pdev->dev; > > + const struct imx_blk_ctl_dev_data *dev_data = > of_device_get_match_data(dev); > > + struct regmap *regmap; > > + struct imx_blk_ctl *ctl; > > + void __iomem *base; > > + > > + ctl = devm_kzalloc(dev, sizeof(*ctl), GFP_KERNEL); > > + if (!ctl) > > + return -ENOMEM; > > + > > + base = devm_platform_ioremap_resource(pdev, 0); > > + if (IS_ERR(base)) > > + return PTR_ERR(base); > > + > > + regmap = devm_regmap_init_mmio(dev, base, &dev_data->config); > > + if (IS_ERR(regmap)) > > + return PTR_ERR(regmap); > > + > > + ctl->regmap = regmap; > > + ctl->dev = dev; > > + ctl->power_count = 0; > > + mutex_init(&ctl->lock); > > + > > + ctl->num_clks = devm_clk_bulk_get_all(dev, &ctl->clks); > > + if (ctl->num_clks < 0) > > + return ctl->num_clks; > > + > > + dev_set_drvdata(dev, ctl); > > + ctl->dev_data = dev_data; > > + > > + return imx_blk_ctl_register(dev); > > +} > > Nitpick: > > Pretty sure all the other platforms will have a similar probe function. > So maybe we can move this into the generic and call it imx8_blk_ctl_register > and pass on the PDs, dev data and regmap_config. > > We could also do this later on when i.MX8MP variant will be done. Let me do this later, I have started i.MX8MP part, and will use a generic probe function. Thanks, Peng. > > > + > > +static const struct of_device_id imx_blk_ctl_of_match[] = { > > + { .compatible = "fsl,imx8mm-vpumix-blk-ctl", .data = > &imx8mm_vpumix_blk_ctl_dev_data }, > > + { .compatible = "fsl,imx8mm-dispmix-blk-ctl", .data = > &imx8mm_dispmix_blk_ctl_dev_data }, > > + { /* Sentinel */ } > > +}; > > +MODULE_DEVICE_TABLE(of, imx_blk_ctl_of_match); > > + > > +static struct platform_driver imx_blk_ctl_driver = { > > + .probe = imx8mm_blk_ctl_probe, > > + .driver = { > > + .name = "imx8mm-blk-ctl", > > + .of_match_table = of_match_ptr(imx_blk_ctl_of_match), > > + .pm = &imx_blk_ctl_pm_ops, > > + }, > > +}; > > +module_platform_driver(imx_blk_ctl_driver); > > -- > > 2.30.0 > >
diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile index d3d2b49a386c..c260b962f495 100644 --- a/drivers/soc/imx/Makefile +++ b/drivers/soc/imx/Makefile @@ -4,4 +4,4 @@ obj-$(CONFIG_ARCH_MXC) += soc-imx.o endif obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o -obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o blk-ctl.o +obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o blk-ctl.o blk-ctl-imx8mm.o diff --git a/drivers/soc/imx/blk-ctl-imx8mm.c b/drivers/soc/imx/blk-ctl-imx8mm.c new file mode 100644 index 000000000000..5ca8d6c52917 --- /dev/null +++ b/drivers/soc/imx/blk-ctl-imx8mm.c @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2021 NXP + */ + +#include <dt-bindings/clock/imx8mm-clock.h> +#include <dt-bindings/power/imx8mm-power.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/pm_domain.h> +#include <linux/regmap.h> + +#include "blk-ctl.h" + +#define MEDIA_BLK_BUS_RSTN_BLK_SYNC_SFT_EN BIT(6) +#define MEDIA_BLK_MIPI_DSI_I_PRESETN_SFT_EN BIT(5) +#define MEDIA_BLK_MIPI_CSI_I_PRESETN_SFT_EN BIT(4) +#define MEDIA_BLK_CAMERA_PIXEL_RESET_N_SFT_EN BIT(3) +#define MEDIA_BLK_CSI_BRIDGE_SFT_EN GENMASK(2, 0) + +#define MEDIA_BLK_BUS_PD_MASK BIT(12) +#define MEDIA_BLK_MIPI_CSI_PD_MASK GENMASK(11, 10) +#define MEDIA_BLK_MIPI_DSI_PD_MASK GENMASK(9, 8) +#define MEDIA_BLK_LCDIF_PD_MASK GENMASK(7, 6) +#define MEDIA_BLK_CSI_BRIDGE_PD_MASK GENMASK(5, 0) + +static struct imx_blk_ctl_hw imx8mm_dispmix_blk_ctl_pds[] = { + IMX_BLK_CTL_PD("CSI_BRIDGE", "dispmix", IMX8MM_BLK_CTL_PD_DISPMIX_CSI_BRIDGE, 0x4, + MEDIA_BLK_CSI_BRIDGE_PD_MASK, 0, MEDIA_BLK_CSI_BRIDGE_SFT_EN, + IMX_BLK_CTL_PD_RESET), + IMX_BLK_CTL_PD("LCDIF", "dispmix", IMX8MM_BLK_CTL_PD_DISPMIX_LCDIF, 0x4, + MEDIA_BLK_LCDIF_PD_MASK, -1, -1, 0), + IMX_BLK_CTL_PD("MIPI_DSI", "mipi", IMX8MM_BLK_CTL_PD_DISPMIX_MIPI_DSI, 0x4, + MEDIA_BLK_MIPI_DSI_PD_MASK, 0, MEDIA_BLK_MIPI_DSI_I_PRESETN_SFT_EN, + IMX_BLK_CTL_PD_RESET), + IMX_BLK_CTL_PD("MIPI_CSI", "mipi", IMX8MM_BLK_CTL_PD_DISPMIX_MIPI_CSI, 0x4, + MEDIA_BLK_MIPI_CSI_PD_MASK, 0, + MEDIA_BLK_MIPI_CSI_I_PRESETN_SFT_EN | MEDIA_BLK_CAMERA_PIXEL_RESET_N_SFT_EN, + IMX_BLK_CTL_PD_RESET) +}; + +static struct imx_blk_ctl_hw imx8mm_vpumix_blk_ctl_pds[] = { + IMX_BLK_CTL_PD("VPU_BLK_CTL_G2", "vpu-g2", IMX8MM_BLK_CTL_PD_VPU_G2, 0x4, + BIT(0), 0, BIT(0), IMX_BLK_CTL_PD_RESET), + IMX_BLK_CTL_PD("VPU_BLK_CTL_G1", "vpu-g1", IMX8MM_BLK_CTL_PD_VPU_G1, 0x4, + BIT(1), 0, BIT(1), IMX_BLK_CTL_PD_RESET), + IMX_BLK_CTL_PD("VPU_BLK_CTL_H1", "vpu-h1", IMX8MM_BLK_CTL_PD_VPU_H1, 0x4, + BIT(2), 0, BIT(2), IMX_BLK_CTL_PD_HANDSHAKE | IMX_BLK_CTL_PD_RESET), +}; + +static const struct regmap_config imx8mm_blk_ctl_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = 0x30, + .fast_io = true, +}; + +static const struct imx_blk_ctl_dev_data imx8mm_vpumix_blk_ctl_dev_data = { + .pds = imx8mm_vpumix_blk_ctl_pds, + .pds_num = ARRAY_SIZE(imx8mm_vpumix_blk_ctl_pds), + .hw_hsk = IMX_BLK_CTL_PD(NULL, NULL, IMX8MM_BLK_CTL_PD_VPU_H1, 0x4, BIT(2), 0, BIT(2), + IMX_BLK_CTL_PD_HANDSHAKE), + .config = imx8mm_blk_ctl_regmap_config, + .active_pd_names = (char*[]){"vpumix", "g1", "g2", "h1"}, + .num_active_pd = 4, +}; + +static const struct imx_blk_ctl_dev_data imx8mm_dispmix_blk_ctl_dev_data = { + .pds = imx8mm_dispmix_blk_ctl_pds, + .pds_num = ARRAY_SIZE(imx8mm_dispmix_blk_ctl_pds), + .hw_hsk = IMX_BLK_CTL_PD(NULL, NULL, -1, 0x4, MEDIA_BLK_BUS_PD_MASK, 0, + MEDIA_BLK_BUS_RSTN_BLK_SYNC_SFT_EN, + IMX_BLK_CTL_PD_HANDSHAKE | IMX_BLK_CTL_PD_RESET), + .config = imx8mm_blk_ctl_regmap_config, + .active_pd_names = (char*[]){"dispmix", "mipi"}, + .num_active_pd = 2, +}; + +static int imx8mm_blk_ctl_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct imx_blk_ctl_dev_data *dev_data = of_device_get_match_data(dev); + struct regmap *regmap; + struct imx_blk_ctl *ctl; + void __iomem *base; + + ctl = devm_kzalloc(dev, sizeof(*ctl), GFP_KERNEL); + if (!ctl) + return -ENOMEM; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return PTR_ERR(base); + + regmap = devm_regmap_init_mmio(dev, base, &dev_data->config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + ctl->regmap = regmap; + ctl->dev = dev; + ctl->power_count = 0; + mutex_init(&ctl->lock); + + ctl->num_clks = devm_clk_bulk_get_all(dev, &ctl->clks); + if (ctl->num_clks < 0) + return ctl->num_clks; + + dev_set_drvdata(dev, ctl); + ctl->dev_data = dev_data; + + return imx_blk_ctl_register(dev); +} + +static const struct of_device_id imx_blk_ctl_of_match[] = { + { .compatible = "fsl,imx8mm-vpumix-blk-ctl", .data = &imx8mm_vpumix_blk_ctl_dev_data }, + { .compatible = "fsl,imx8mm-dispmix-blk-ctl", .data = &imx8mm_dispmix_blk_ctl_dev_data }, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(of, imx_blk_ctl_of_match); + +static struct platform_driver imx_blk_ctl_driver = { + .probe = imx8mm_blk_ctl_probe, + .driver = { + .name = "imx8mm-blk-ctl", + .of_match_table = of_match_ptr(imx_blk_ctl_of_match), + .pm = &imx_blk_ctl_pm_ops, + }, +}; +module_platform_driver(imx_blk_ctl_driver);