@@ -127,6 +127,7 @@ config ARM
select PERF_USE_VMALLOC
select RTC_LIB
select SET_FS
+ select SYSFB
select SYS_SUPPORTS_APM_EMULATION
# Above selects are sorted alphabetically; please add new ones
# according to that. Thanks.
@@ -17,6 +17,7 @@
#ifdef CONFIG_EFI
void efi_init(void);
+extern void efifb_setup_from_dmi(struct screen_info *si, const char *opt);
int efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md);
int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md);
@@ -52,10 +53,6 @@ void efi_virtmap_unload(void);
struct screen_info *alloc_screen_info(void);
void free_screen_info(struct screen_info *si);
-static inline void efifb_setup_from_dmi(struct screen_info *si, const char *opt)
-{
-}
-
/*
* A reasonable upper bound for the uncompressed kernel size is 32 MBytes,
* so we will reserve that amount of memory. We have no easy way to tell what
@@ -1884,6 +1884,7 @@ config EFI
select EFI_RUNTIME_WRAPPERS
select EFI_STUB
select EFI_GENERIC_STUB
+ select SYSFB
imply IMA_SECURE_AND_OR_TRUSTED_BOOT
default y
help
@@ -14,6 +14,7 @@
#ifdef CONFIG_EFI
extern void efi_init(void);
+extern void efifb_setup_from_dmi(struct screen_info *si, const char *opt);
#else
#define efi_init()
#endif
@@ -85,10 +86,6 @@ static inline void free_screen_info(struct screen_info *si)
{
}
-static inline void efifb_setup_from_dmi(struct screen_info *si, const char *opt)
-{
-}
-
#define EFI_ALLOC_ALIGN SZ_64K
/*
@@ -474,6 +474,7 @@ config EFI
select EFI_GENERIC_STUB
select EFI_RUNTIME_WRAPPERS
select RISCV_ISA_C
+ select SYSFB
depends on MMU
default y
help
@@ -13,6 +13,7 @@
#ifdef CONFIG_EFI
extern void efi_init(void);
+extern void efifb_setup_from_dmi(struct screen_info *si, const char *opt);
#else
#define efi_init()
#endif
@@ -39,10 +40,6 @@ static inline void free_screen_info(struct screen_info *si)
{
}
-static inline void efifb_setup_from_dmi(struct screen_info *si, const char *opt)
-{
-}
-
void efi_virtmap_load(void);
void efi_virtmap_unload(void);
@@ -253,9 +253,8 @@ config QCOM_SCM_DOWNLOAD_MODE_DEFAULT
config SYSFB
bool
- depends on X86
-config X86_SYSFB
+config SYSFB_SIMPLEFB
bool "Mark VGA/VBE/EFI FB as generic system framebuffer"
depends on SYSFB
help
@@ -263,10 +262,10 @@ config X86_SYSFB
bootloader or kernel can show basic video-output during boot for
user-guidance and debugging. Historically, x86 used the VESA BIOS
Extensions and EFI-framebuffers for this, which are mostly limited
- to x86.
+ to x86 BIOS or EFI systems.
This option, if enabled, marks VGA/VBE/EFI framebuffers as generic
framebuffers so the new generic system-framebuffer drivers can be
- used on x86. If the framebuffer is not compatible with the generic
+ used instead. If the framebuffer is not compatible with the generic
modes, it is advertised as fallback platform framebuffer so legacy
drivers like efifb, vesafb and uvesafb can pick it up.
If this option is not selected, all system framebuffers are always
@@ -19,7 +19,7 @@ obj-$(CONFIG_RASPBERRYPI_FIRMWARE) += raspberrypi.o
obj-$(CONFIG_FW_CFG_SYSFS) += qemu_fw_cfg.o
obj-$(CONFIG_QCOM_SCM) += qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o
obj-$(CONFIG_SYSFB) += sysfb.o
-obj-$(CONFIG_X86_SYSFB) += sysfb_simplefb.o
+obj-$(CONFIG_SYSFB_SIMPLEFB) += sysfb_simplefb.o
obj-$(CONFIG_TI_SCI_PROTOCOL) += ti_sci.o
obj-$(CONFIG_TRUSTED_FOUNDATIONS) += trusted_foundations.o
obj-$(CONFIG_TURRIS_MOX_RWTM) += turris-mox-rwtm.o
@@ -275,93 +275,3 @@ void __init efi_init(void)
}
#endif
}
-
-static bool efifb_overlaps_pci_range(const struct of_pci_range *range)
-{
- u64 fb_base = screen_info.lfb_base;
-
- if (screen_info.capabilities & VIDEO_CAPABILITY_64BIT_BASE)
- fb_base |= (u64)(unsigned long)screen_info.ext_lfb_base << 32;
-
- return fb_base >= range->cpu_addr &&
- fb_base < (range->cpu_addr + range->size);
-}
-
-static struct device_node *find_pci_overlap_node(void)
-{
- struct device_node *np;
-
- for_each_node_by_type(np, "pci") {
- struct of_pci_range_parser parser;
- struct of_pci_range range;
- int err;
-
- err = of_pci_range_parser_init(&parser, np);
- if (err) {
- pr_warn("of_pci_range_parser_init() failed: %d\n", err);
- continue;
- }
-
- for_each_of_pci_range(&parser, &range)
- if (efifb_overlaps_pci_range(&range))
- return np;
- }
- return NULL;
-}
-
-/*
- * If the efifb framebuffer is backed by a PCI graphics controller, we have
- * to ensure that this relation is expressed using a device link when
- * running in DT mode, or the probe order may be reversed, resulting in a
- * resource reservation conflict on the memory window that the efifb
- * framebuffer steals from the PCIe host bridge.
- */
-static int efifb_add_links(struct fwnode_handle *fwnode)
-{
- struct device_node *sup_np;
-
- sup_np = find_pci_overlap_node();
-
- /*
- * If there's no PCI graphics controller backing the efifb, we are
- * done here.
- */
- if (!sup_np)
- return 0;
-
- fwnode_link_add(fwnode, of_fwnode_handle(sup_np));
- of_node_put(sup_np);
-
- return 0;
-}
-
-static const struct fwnode_operations efifb_fwnode_ops = {
- .add_links = efifb_add_links,
-};
-
-static struct fwnode_handle efifb_fwnode;
-
-static int __init register_gop_device(void)
-{
- struct platform_device *pd;
- int err;
-
- if (screen_info.orig_video_isVGA != VIDEO_TYPE_EFI)
- return 0;
-
- pd = platform_device_alloc("efi-framebuffer", 0);
- if (!pd)
- return -ENOMEM;
-
- if (IS_ENABLED(CONFIG_PCI)) {
- fwnode_init(&efifb_fwnode, &efifb_fwnode_ops);
- pd->dev.fwnode = &efifb_fwnode;
- }
-
- err = platform_device_add_data(pd, &screen_info, sizeof(screen_info));
- if (err)
- return err;
-
- return platform_device_add(pd);
-}
-subsys_initcall(register_gop_device);
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
- * Generic System Framebuffers on x86
+ * Generic System Framebuffers
* Copyright (c) 2012-2013 David Herrmann <dh.herrmann@gmail.com>
*
* EFI Quirks Copyright (c) 2006 Edgar Hucek <gimli@dark-green.com>
@@ -19,7 +19,9 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/mm.h>
+#include <linux/of_address.h>
#include <linux/pci.h>
+#include <linux/platform_device.h>
#include <linux/screen_info.h>
#include <linux/sysfb.h>
#include <video/vga.h>
@@ -267,7 +269,72 @@ static const struct dmi_system_id efifb_dmi_swap_width_height[] __initconst = {
{},
};
-__init void sysfb_apply_efi_quirks(void)
+static bool efifb_overlaps_pci_range(const struct of_pci_range *range)
+{
+ u64 fb_base = screen_info.lfb_base;
+
+ if (screen_info.capabilities & VIDEO_CAPABILITY_64BIT_BASE)
+ fb_base |= (u64)(unsigned long)screen_info.ext_lfb_base << 32;
+
+ return fb_base >= range->cpu_addr &&
+ fb_base < (range->cpu_addr + range->size);
+}
+
+static struct device_node *find_pci_overlap_node(void)
+{
+ struct device_node *np;
+
+ for_each_node_by_type(np, "pci") {
+ struct of_pci_range_parser parser;
+ struct of_pci_range range;
+ int err;
+
+ err = of_pci_range_parser_init(&parser, np);
+ if (err) {
+ pr_warn("of_pci_range_parser_init() failed: %d\n", err);
+ continue;
+ }
+
+ for_each_of_pci_range(&parser, &range)
+ if (efifb_overlaps_pci_range(&range))
+ return np;
+ }
+ return NULL;
+}
+
+/*
+ * If the efifb framebuffer is backed by a PCI graphics controller, we have
+ * to ensure that this relation is expressed using a device link when
+ * running in DT mode, or the probe order may be reversed, resulting in a
+ * resource reservation conflict on the memory window that the efifb
+ * framebuffer steals from the PCIe host bridge.
+ */
+static int efifb_add_links(struct fwnode_handle *fwnode)
+{
+ struct device_node *sup_np;
+
+ sup_np = find_pci_overlap_node();
+
+ /*
+ * If there's no PCI graphics controller backing the efifb, we are
+ * done here.
+ */
+ if (!sup_np)
+ return 0;
+
+ fwnode_link_add(fwnode, of_fwnode_handle(sup_np));
+ of_node_put(sup_np);
+
+ return 0;
+}
+
+static const struct fwnode_operations efifb_fwnode_ops = {
+ .add_links = efifb_add_links,
+};
+
+static struct fwnode_handle efifb_fwnode;
+
+__init void sysfb_apply_efi_quirks(struct platform_device *pd)
{
if (screen_info.orig_video_isVGA != VIDEO_TYPE_EFI ||
!(screen_info.capabilities & VIDEO_CAPABILITY_SKIP_QUIRKS))
@@ -281,4 +348,10 @@ __init void sysfb_apply_efi_quirks(void)
screen_info.lfb_height = temp;
screen_info.lfb_linelength = 4 * screen_info.lfb_width;
}
+
+ if (screen_info.orig_video_isVGA == VIDEO_TYPE_EFI &&
+ IS_ENABLED(CONFIG_PCI)) {
+ fwnode_init(&efifb_fwnode, &efifb_fwnode_ops);
+ pd->dev.fwnode = &efifb_fwnode;
+ }
}
@@ -1,11 +1,11 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
- * Generic System Framebuffers on x86
+ * Generic System Framebuffers
* Copyright (c) 2012-2013 David Herrmann <dh.herrmann@gmail.com>
*/
/*
- * Simple-Framebuffer support for x86 systems
+ * Simple-Framebuffer support
* Create a platform-device for any available boot framebuffer. The
* simple-framebuffer platform device is already available on DT systems, so
* this module parses the global "screen_info" object and creates a suitable
@@ -16,12 +16,12 @@
* to pick these devices up without messing with simple-framebuffer drivers.
* The global "screen_info" is still valid at all times.
*
- * If CONFIG_X86_SYSFB is not selected, we never register "simple-framebuffer"
+ * If CONFIG_SYSFB_SIMPLEFB is not selected, never register "simple-framebuffer"
* platform devices, but only use legacy framebuffer devices for
* backwards compatibility.
*
* TODO: We set the dev_id field of all platform-devices to 0. This allows
- * other x86 OF/DT parsers to create such devices, too. However, they must
+ * other OF/DT parsers to create such devices, too. However, they must
* start at offset 1 for this to work.
*/
@@ -39,31 +39,43 @@ static __init int sysfb_init(void)
struct screen_info *si = &screen_info;
struct simplefb_platform_data mode;
struct platform_device *pd;
- const char *name;
bool compatible;
int ret;
- sysfb_apply_efi_quirks();
+ pd = platform_device_alloc("", 0);
+ if (!pd)
+ return -ENOMEM;
+
+ sysfb_apply_efi_quirks(pd);
/* try to create a simple-framebuffer device */
- compatible = parse_mode(si, &mode);
+ compatible = sysfb_parse_mode(si, &mode);
if (compatible) {
- ret = create_simplefb(si, &mode);
+ ret = sysfb_create_simplefb(si, &mode, pd);
if (!ret)
return 0;
}
/* if the FB is incompatible, create a legacy framebuffer device */
if (si->orig_video_isVGA == VIDEO_TYPE_EFI)
- name = "efi-framebuffer";
+ pd->name = "efi-framebuffer";
else if (si->orig_video_isVGA == VIDEO_TYPE_VLFB)
- name = "vesa-framebuffer";
+ pd->name = "vesa-framebuffer";
else
- name = "platform-framebuffer";
+ pd->name = "platform-framebuffer";
+
+ ret = platform_device_add_data(pd, si, sizeof(*si));
+ if (ret)
+ goto err;
+
+ ret = platform_device_add(pd);
+ if (ret)
+ goto err;
- pd = platform_device_register_resndata(NULL, name, 0,
- NULL, 0, si, sizeof(*si));
- return PTR_ERR_OR_ZERO(pd);
+ return 0;
+err:
+ platform_device_put(pd);
+ return ret;
}
/* must execute after PCI subsystem for EFI quirks */
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
- * Generic System Framebuffers on x86
+ * Generic System Framebuffers
* Copyright (c) 2012-2013 David Herrmann <dh.herrmann@gmail.com>
*/
@@ -23,9 +23,9 @@
static const char simplefb_resname[] = "BOOTFB";
static const struct simplefb_format formats[] = SIMPLEFB_FORMATS;
-/* try parsing x86 screen_info into a simple-framebuffer mode struct */
-__init bool parse_mode(const struct screen_info *si,
- struct simplefb_platform_data *mode)
+/* try parsing screen_info into a simple-framebuffer mode struct */
+__init bool sysfb_parse_mode(const struct screen_info *si,
+ struct simplefb_platform_data *mode)
{
const struct simplefb_format *f;
__u8 type;
@@ -57,13 +57,14 @@ __init bool parse_mode(const struct screen_info *si,
return false;
}
-__init int create_simplefb(const struct screen_info *si,
- const struct simplefb_platform_data *mode)
+__init int sysfb_create_simplefb(const struct screen_info *si,
+ const struct simplefb_platform_data *mode,
+ struct platform_device *pd)
{
- struct platform_device *pd;
struct resource res;
u64 base, size;
u32 length;
+ int ret;
/*
* If the 64BIT_BASE capability is set, ext_lfb_base will contain the
@@ -105,7 +106,15 @@ __init int create_simplefb(const struct screen_info *si,
if (res.end <= res.start)
return -EINVAL;
- pd = platform_device_register_resndata(NULL, "simple-framebuffer", 0,
- &res, 1, mode, sizeof(*mode));
- return PTR_ERR_OR_ZERO(pd);
+ pd->name = "simple-framebuffer";
+
+ ret = platform_device_add_resources(pd, &res, 1);
+ if (ret)
+ return ret;
+
+ ret = platform_device_add_data(pd, mode, sizeof(*mode));
+ if (ret)
+ return ret;
+
+ return platform_device_add(pd);
}
@@ -58,37 +58,39 @@ struct efifb_dmi_info {
#ifdef CONFIG_EFI
extern struct efifb_dmi_info efifb_dmi_list[];
-void sysfb_apply_efi_quirks(void);
+void sysfb_apply_efi_quirks(struct platform_device *pd);
#else /* CONFIG_EFI */
-static inline void sysfb_apply_efi_quirks(void)
+static inline void sysfb_apply_efi_quirks(struct platform_device *pd)
{
}
#endif /* CONFIG_EFI */
-#ifdef CONFIG_X86_SYSFB
+#ifdef CONFIG_SYSFB_SIMPLEFB
-bool parse_mode(const struct screen_info *si,
- struct simplefb_platform_data *mode);
-int create_simplefb(const struct screen_info *si,
- const struct simplefb_platform_data *mode);
+bool sysfb_parse_mode(const struct screen_info *si,
+ struct simplefb_platform_data *mode);
+int sysfb_create_simplefb(const struct screen_info *si,
+ const struct simplefb_platform_data *mode,
+ struct platform_device *pd);
-#else /* CONFIG_X86_SYSFB */
+#else /* CONFIG_SYSFB_SIMPLE */
-static inline bool parse_mode(const struct screen_info *si,
- struct simplefb_platform_data *mode)
+static inline bool sysfb_parse_mode(const struct screen_info *si,
+ struct simplefb_platform_data *mode)
{
return false;
}
-static inline int create_simplefb(const struct screen_info *si,
- const struct simplefb_platform_data *mode)
+static inline int sysfb_create_simplefb(const struct screen_info *si,
+ const struct simplefb_platform_data *mode,
+ struct platform_device *pd)
{
return -EINVAL;
}
-#endif /* CONFIG_X86_SYSFB */
+#endif /* CONFIG_SYSFB_SIMPLE */
#endif /* _LINUX_SYSFB_H */
The register_gop_device() function registers an "efi-framebuffer" platform device to match against the efifb driver, to have an early framebuffer for EFI platforms. But the Generic System Framebuffers (sysfb) already has support for this. Instead of having duplicated logic for x86 and other architectures using EFI, consolidate the two in sysfb and remove it from the EFI init logic. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> --- arch/arm/Kconfig | 1 + arch/arm/include/asm/efi.h | 5 +- arch/arm64/Kconfig | 1 + arch/arm64/include/asm/efi.h | 5 +- arch/riscv/Kconfig | 1 + arch/riscv/include/asm/efi.h | 5 +- drivers/firmware/Kconfig | 7 ++- drivers/firmware/Makefile | 2 +- drivers/firmware/efi/efi-init.c | 90 ------------------------------- drivers/firmware/efi/sysfb_efi.c | 77 +++++++++++++++++++++++++- drivers/firmware/sysfb.c | 40 +++++++++----- drivers/firmware/sysfb_simplefb.c | 29 ++++++---- include/linux/sysfb.h | 28 +++++----- 13 files changed, 145 insertions(+), 146 deletions(-)