| Message ID | 20210522000309.26134-6-s-anna@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | K3 R5F & DSP IPC-only mode support | expand |
On Fri, May 21, 2021 at 07:03:08PM -0500, Suman Anna wrote: > Refactor out the mailbox request and associated ping logic code > from k3_dsp_rproc_start() function into its own separate function > so that it can be re-used in the soon to be added .attach() ops > callback. > > Signed-off-by: Suman Anna <s-anna@ti.com> > --- > drivers/remoteproc/ti_k3_dsp_remoteproc.c | 65 ++++++++++++++--------- > 1 file changed, 39 insertions(+), 26 deletions(-) Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> > > diff --git a/drivers/remoteproc/ti_k3_dsp_remoteproc.c b/drivers/remoteproc/ti_k3_dsp_remoteproc.c > index fd4eb67a6681..faf60a274e8d 100644 > --- a/drivers/remoteproc/ti_k3_dsp_remoteproc.c > +++ b/drivers/remoteproc/ti_k3_dsp_remoteproc.c > @@ -216,6 +216,43 @@ static int k3_dsp_rproc_release(struct k3_dsp_rproc *kproc) > return ret; > } > > +static int k3_dsp_rproc_request_mbox(struct rproc *rproc) > +{ > + struct k3_dsp_rproc *kproc = rproc->priv; > + struct mbox_client *client = &kproc->client; > + struct device *dev = kproc->dev; > + int ret; > + > + client->dev = dev; > + client->tx_done = NULL; > + client->rx_callback = k3_dsp_rproc_mbox_callback; > + client->tx_block = false; > + client->knows_txdone = false; > + > + kproc->mbox = mbox_request_channel(client, 0); > + if (IS_ERR(kproc->mbox)) { > + ret = -EBUSY; > + dev_err(dev, "mbox_request_channel failed: %ld\n", > + PTR_ERR(kproc->mbox)); > + return ret; > + } > + > + /* > + * Ping the remote processor, this is only for sanity-sake for now; > + * there is no functional effect whatsoever. > + * > + * Note that the reply will _not_ arrive immediately: this message > + * will wait in the mailbox fifo until the remote processor is booted. > + */ > + ret = mbox_send_message(kproc->mbox, (void *)RP_MBOX_ECHO_REQUEST); > + if (ret < 0) { > + dev_err(dev, "mbox_send_message failed: %d\n", ret); > + mbox_free_channel(kproc->mbox); > + return ret; > + } > + > + return 0; > +} > /* > * The C66x DSP cores have a local reset that affects only the CPU, and a > * generic module reset that powers on the device and allows the DSP internal > @@ -273,37 +310,13 @@ static int k3_dsp_rproc_unprepare(struct rproc *rproc) > static int k3_dsp_rproc_start(struct rproc *rproc) > { > struct k3_dsp_rproc *kproc = rproc->priv; > - struct mbox_client *client = &kproc->client; > struct device *dev = kproc->dev; > u32 boot_addr; > int ret; > > - client->dev = dev; > - client->tx_done = NULL; > - client->rx_callback = k3_dsp_rproc_mbox_callback; > - client->tx_block = false; > - client->knows_txdone = false; > - > - kproc->mbox = mbox_request_channel(client, 0); > - if (IS_ERR(kproc->mbox)) { > - ret = -EBUSY; > - dev_err(dev, "mbox_request_channel failed: %ld\n", > - PTR_ERR(kproc->mbox)); > + ret = k3_dsp_rproc_request_mbox(rproc); > + if (ret) > return ret; > - } > - > - /* > - * Ping the remote processor, this is only for sanity-sake for now; > - * there is no functional effect whatsoever. > - * > - * Note that the reply will _not_ arrive immediately: this message > - * will wait in the mailbox fifo until the remote processor is booted. > - */ > - ret = mbox_send_message(kproc->mbox, (void *)RP_MBOX_ECHO_REQUEST); > - if (ret < 0) { > - dev_err(dev, "mbox_send_message failed: %d\n", ret); > - goto put_mbox; > - } > > boot_addr = rproc->bootaddr; > if (boot_addr & (kproc->data->boot_align_addr - 1)) { > -- > 2.30.1 >
diff --git a/drivers/remoteproc/ti_k3_dsp_remoteproc.c b/drivers/remoteproc/ti_k3_dsp_remoteproc.c index fd4eb67a6681..faf60a274e8d 100644 --- a/drivers/remoteproc/ti_k3_dsp_remoteproc.c +++ b/drivers/remoteproc/ti_k3_dsp_remoteproc.c @@ -216,6 +216,43 @@ static int k3_dsp_rproc_release(struct k3_dsp_rproc *kproc) return ret; } +static int k3_dsp_rproc_request_mbox(struct rproc *rproc) +{ + struct k3_dsp_rproc *kproc = rproc->priv; + struct mbox_client *client = &kproc->client; + struct device *dev = kproc->dev; + int ret; + + client->dev = dev; + client->tx_done = NULL; + client->rx_callback = k3_dsp_rproc_mbox_callback; + client->tx_block = false; + client->knows_txdone = false; + + kproc->mbox = mbox_request_channel(client, 0); + if (IS_ERR(kproc->mbox)) { + ret = -EBUSY; + dev_err(dev, "mbox_request_channel failed: %ld\n", + PTR_ERR(kproc->mbox)); + return ret; + } + + /* + * Ping the remote processor, this is only for sanity-sake for now; + * there is no functional effect whatsoever. + * + * Note that the reply will _not_ arrive immediately: this message + * will wait in the mailbox fifo until the remote processor is booted. + */ + ret = mbox_send_message(kproc->mbox, (void *)RP_MBOX_ECHO_REQUEST); + if (ret < 0) { + dev_err(dev, "mbox_send_message failed: %d\n", ret); + mbox_free_channel(kproc->mbox); + return ret; + } + + return 0; +} /* * The C66x DSP cores have a local reset that affects only the CPU, and a * generic module reset that powers on the device and allows the DSP internal @@ -273,37 +310,13 @@ static int k3_dsp_rproc_unprepare(struct rproc *rproc) static int k3_dsp_rproc_start(struct rproc *rproc) { struct k3_dsp_rproc *kproc = rproc->priv; - struct mbox_client *client = &kproc->client; struct device *dev = kproc->dev; u32 boot_addr; int ret; - client->dev = dev; - client->tx_done = NULL; - client->rx_callback = k3_dsp_rproc_mbox_callback; - client->tx_block = false; - client->knows_txdone = false; - - kproc->mbox = mbox_request_channel(client, 0); - if (IS_ERR(kproc->mbox)) { - ret = -EBUSY; - dev_err(dev, "mbox_request_channel failed: %ld\n", - PTR_ERR(kproc->mbox)); + ret = k3_dsp_rproc_request_mbox(rproc); + if (ret) return ret; - } - - /* - * Ping the remote processor, this is only for sanity-sake for now; - * there is no functional effect whatsoever. - * - * Note that the reply will _not_ arrive immediately: this message - * will wait in the mailbox fifo until the remote processor is booted. - */ - ret = mbox_send_message(kproc->mbox, (void *)RP_MBOX_ECHO_REQUEST); - if (ret < 0) { - dev_err(dev, "mbox_send_message failed: %d\n", ret); - goto put_mbox; - } boot_addr = rproc->bootaddr; if (boot_addr & (kproc->data->boot_align_addr - 1)) {
Refactor out the mailbox request and associated ping logic code from k3_dsp_rproc_start() function into its own separate function so that it can be re-used in the soon to be added .attach() ops callback. Signed-off-by: Suman Anna <s-anna@ti.com> --- drivers/remoteproc/ti_k3_dsp_remoteproc.c | 65 ++++++++++++++--------- 1 file changed, 39 insertions(+), 26 deletions(-)