@@ -6,6 +6,7 @@
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3228-cru.h>
#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/power/rk3228-power.h>
/ {
#address-cells = <1>;
@@ -190,6 +191,65 @@ io_domains: io-domains {
status = "disabled";
};
+ power: power-controller {
+ compatible = "rockchip,rk3228-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-domain@RK3228_PD_VIO {
+ reg = <RK3228_PD_VIO>;
+ clocks = <&cru ACLK_HDCP>,
+ <&cru SCLK_HDCP>,
+ <&cru ACLK_IEP>,
+ <&cru HCLK_IEP>,
+ <&cru ACLK_RGA>,
+ <&cru HCLK_RGA>,
+ <&cru SCLK_RGA>;
+ pm_qos = <&qos_hdcp>,
+ <&qos_iep>,
+ <&qos_rga_r>,
+ <&qos_rga_w>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@RK3228_PD_VOP {
+ reg = <RK3228_PD_VOP>;
+ clocks =<&cru ACLK_VOP>,
+ <&cru DCLK_VOP>,
+ <&cru HCLK_VOP>;
+ pm_qos = <&qos_vop>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@RK3228_PD_VPU {
+ reg = <RK3228_PD_VPU>;
+ clocks = <&cru ACLK_VPU>,
+ <&cru HCLK_VPU>;
+ pm_qos = <&qos_vpu>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@RK3228_PD_RKVDEC {
+ reg = <RK3228_PD_RKVDEC>;
+ clocks = <&cru ACLK_RKVDEC>,
+ <&cru HCLK_RKVDEC>,
+ <&cru SCLK_VDEC_CABAC>,
+ <&cru SCLK_VDEC_CORE>;
+ pm_qos = <&qos_rkvdec_r>,
+ <&qos_rkvdec_w>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@RK3228_PD_GPU {
+ reg = <RK3228_PD_GPU>;
+ clocks = <&cru ACLK_GPU>;
+ pm_qos = <&qos_gpu>;
+ #power-domain-cells = <0>;
+ };
+
+ };
+
u2phy0: usb2-phy@760 {
compatible = "rockchip,rk3228-usb2phy";
reg = <0x0760 0x0c>;
@@ -240,6 +300,7 @@ u2phy1_host: host-port {
status = "disabled";
};
};
+
};
uart0: serial@11010000 {
@@ -546,6 +607,7 @@ gpu: gpu@20000000 {
"ppmmu1";
clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
clock-names = "bus", "core";
+ power-domains = <&power RK3228_PD_GPU>;
resets = <&cru SRST_GPU_A>;
status = "disabled";
};
@@ -556,6 +618,7 @@ vpu_mmu: iommu@20020800 {
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
clock-names = "aclk", "iface";
+ power-domains = <&power RK3228_PD_VPU>;
#iommu-cells = <0>;
status = "disabled";
};
@@ -566,6 +629,7 @@ vdec_mmu: iommu@20030480 {
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>;
clock-names = "aclk", "iface";
+ power-domains = <&power RK3228_PD_RKVDEC>;
#iommu-cells = <0>;
status = "disabled";
};
@@ -579,6 +643,7 @@ vop: vop@20050000 {
resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>;
reset-names = "axi", "ahb", "dclk";
iommus = <&vop_mmu>;
+ power-domains = <&power RK3228_PD_VOP>;
status = "disabled";
vop_out: port {
@@ -598,6 +663,7 @@ vop_mmu: iommu@20053f00 {
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
clock-names = "aclk", "iface";
+ power-domains = <&power RK3228_PD_VOP>;
#iommu-cells = <0>;
status = "disabled";
};
@@ -608,6 +674,7 @@ rga: rga@20060000 {
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>;
clock-names = "aclk", "hclk", "sclk";
+ power-domains = <&power RK3228_PD_VIO>;
resets = <&cru SRST_RGA>, <&cru SRST_RGA_A>, <&cru SRST_RGA_H>;
reset-names = "core", "axi", "ahb";
};
@@ -618,6 +685,7 @@ iep_mmu: iommu@20070800 {
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
clock-names = "aclk", "iface";
+ power-domains = <&power RK3228_PD_VIO>;
#iommu-cells = <0>;
status = "disabled";
};
@@ -792,6 +860,51 @@ gmac: ethernet@30200000 {
status = "disabled";
};
+ qos_iep: qos@31030080 {
+ compatible = "rockchip,rk3228-qos", "syscon";
+ reg = <0x31030080 0x20>;
+ };
+
+ qos_rga_w: qos@31030100 {
+ compatible = "rockchip,rk3228-qos", "syscon";
+ reg = <0x31030100 0x20>;
+ };
+
+ qos_hdcp: qos@31030180 {
+ compatible = "rockchip,rk3228-qos", "syscon";
+ reg = <0x31030180 0x20>;
+ };
+
+ qos_rga_r: qos@31030200 {
+ compatible = "rockchip,rk3228-qos", "syscon";
+ reg = <0x31030200 0x20>;
+ };
+
+ qos_vpu: qos@31040000 {
+ compatible = "rockchip,rk3228-qos", "syscon";
+ reg = <0x31040000 0x20>;
+ };
+
+ qos_gpu: qos@31050000 {
+ compatible = "rockchip,rk3228-qos", "syscon";
+ reg = <0x31050000 0x20>;
+ };
+
+ qos_vop: qos@31060000 {
+ compatible = "rockchip,rk3228-qos", "syscon";
+ reg = <0x31060000 0x20>;
+ };
+
+ qos_rkvdec_r: qos@31070000 {
+ compatible = "rockchip,rk3228-qos", "syscon";
+ reg = <0x31070000 0x20>;
+ };
+
+ qos_rkvdec_w: qos@31070080 {
+ compatible = "rockchip,rk3228-qos", "syscon";
+ reg = <0x31070080 0x20>;
+ };
+
gic: interrupt-controller@32010000 {
compatible = "arm,gic-400";
interrupt-controller;
Add the power controller node and the correspondending qos nodes for RK322x. Also add the power-domain property to the nodes that are already present. Signed-off-by: Alex Bee <knaerzche@gmail.com> --- Changes in v2: - moved power node to appropriate position - added #power-domain-cells for RK3228_PD_GPU - moved power-domains property after iommous property arch/arm/boot/dts/rk322x.dtsi | 113 ++++++++++++++++++++++++++++++++++ 1 file changed, 113 insertions(+)