@@ -6,6 +6,7 @@
/dts-v1/;
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
#include "rk3399.dtsi"
#include "rk3399-opp.dtsi"
@@ -220,6 +221,17 @@ vcc5v0_host: vcc5v0-host-regulator {
vin-supply = <&vcc_sys>;
};
+ vcc5v0_typec: vcc5v0-typec-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_typec_en>;
+ regulator-name = "vcc5v0_typec";
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
vcc_sys: vcc-sys {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
@@ -551,6 +563,53 @@ accelerometer@68 {
interrupt-parent = <&gpio1>;
interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
};
+
+ fusb0: typec-portc@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb0_int>;
+ vbus-supply = <&vcc5v0_typec>;
+ status = "okay";
+
+ connector {
+ compatible = "usb-c-connector";
+ data-role = "host";
+ label = "USB-C";
+ op-sink-microwatt = <1000000>;
+ power-role = "dual";
+ sink-pdos =
+ <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
+ source-pdos =
+ <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
+ try-power-role = "sink";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usbc_hs: endpoint {
+ remote-endpoint =
+ <&u2phy0_typec_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usbc_ss: endpoint {
+ remote-endpoint =
+ <&tcphy0_typec_ss>;
+ };
+ };
+ };
+ };
+ };
};
&i2s0 {
@@ -602,6 +661,12 @@ pwrbtn: pwrbtn {
};
};
+ fusb302x {
+ fusb0_int: fusb0-int {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
ir {
ir_int: ir-int {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -660,6 +725,12 @@ wifi_enable_h: wifi-enable-h {
};
};
+ usb-typec {
+ vcc5v0_typec_en: vcc5v0_typec_en {
+ rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
usb2 {
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -753,6 +824,14 @@ &tcphy0 {
status = "okay";
};
+&tcphy0_usb3 {
+ port {
+ tcphy0_typec_ss: endpoint {
+ remote-endpoint = <&usbc_ss>;
+ };
+ };
+};
+
&tcphy1 {
status = "okay";
};
@@ -776,6 +855,12 @@ u2phy0_host: host-port {
phy-supply = <&vcc5v0_host>;
status = "okay";
};
+
+ port {
+ u2phy0_typec_hs: endpoint {
+ remote-endpoint = <&usbc_hs>;
+ };
+ };
};
&u2phy1 {
Add the initial details for the USB-C port. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> --- .../boot/dts/rockchip/rk3399-firefly.dts | 85 +++++++++++++++++++ 1 file changed, 85 insertions(+)