@@ -16,6 +16,7 @@
#include <linux/reset.h>
#include <linux/spinlock.h>
#include <linux/types.h>
+#include <linux/bitfield.h>
#include <linux/iio/iio.h>
#include <linux/iio/driver.h>
@@ -28,15 +29,28 @@
#define ASPEED_REG_INTERRUPT_CONTROL 0x04
#define ASPEED_REG_VGA_DETECT_CONTROL 0x08
#define ASPEED_REG_CLOCK_CONTROL 0x0C
-#define ASPEED_REG_MAX 0xC0
-
-#define ASPEED_OPERATION_MODE_POWER_DOWN (0x0 << 1)
-#define ASPEED_OPERATION_MODE_STANDBY (0x1 << 1)
-#define ASPEED_OPERATION_MODE_NORMAL (0x7 << 1)
-
-#define ASPEED_ENGINE_ENABLE BIT(0)
-
-#define ASPEED_ADC_CTRL_INIT_RDY BIT(8)
+#define ASPEED_REG_COMPENSATION_TRIM 0xC4
+#define ASPEED_REG_MAX 0xCC
+
+#define ASPEED_ADC_ENGINE_ENABLE BIT(0)
+#define ASPEED_ADC_OPERATION_MODE GENMASK(3, 1)
+#define ASPEED_ADC_OPERATION_MODE_POWER_DOWN FIELD_PREP(ASPEED_ADC_OPERATION_MODE, 0)
+#define ASPEED_ADC_OPERATION_MODE_STANDBY FIELD_PREP(ASPEED_ADC_OPERATION_MODE, 1)
+#define ASPEED_ADC_OPERATION_MODE_NORMAL FIELD_PREP(ASPEED_ADC_OPERATION_MODE, 7)
+#define ASPEED_ADC_CTRL_COMPENSATION BIT(4)
+#define ASPEED_ADC_AUTO_COMPENSATION BIT(5)
+#define ASPEED_ADC_REF_VOLTAGE GENMASK(7, 6)
+#define ASPEED_ADC_REF_VOLTAGE_2500mV FIELD_PREP(ASPEED_ADC_REF_VOLTAGE, 0)
+#define ASPEED_ADC_REF_VOLTAGE_1200mV FIELD_PREP(ASPEED_ADC_REF_VOLTAGE, 1)
+#define ASPEED_ADC_REF_VOLTAGE_EXT_HIGH FIELD_PREP(ASPEED_ADC_REF_VOLTAGE, 2)
+#define ASPEED_ADC_REF_VOLTAGE_EXT_LOW FIELD_PREP(ASPEED_ADC_REF_VOLTAGE, 3)
+#define ASPEED_ADC_CTRL_INIT_RDY BIT(8)
+#define ASPEED_ADC_CH7_MODE BIT(12)
+#define ASPEED_ADC_CH7_NORMAL FIELD_PREP(ASPEED_ADC_CH7_MODE, 0)
+#define ASPEED_ADC_CH7_BATTERY FIELD_PREP(ASPEED_ADC_CH7_MODE, 1)
+#define ASPEED_ADC_BATTERY_SENSING_ENABLE BIT(13)
+#define ASPEED_ADC_CTRL_CHANNEL GENMASK(31, 16)
+#define ASPEED_ADC_CTRL_CHANNEL_ENABLE(ch) FIELD_PREP(ASPEED_ADC_CTRL_CHANNEL, BIT(ch))
#define ASPEED_ADC_INIT_POLLING_TIME 500
#define ASPEED_ADC_INIT_TIMEOUT 500000
@@ -226,7 +240,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)
if (model_data->wait_init_sequence) {
/* Enable engine in normal mode. */
- writel(ASPEED_OPERATION_MODE_NORMAL | ASPEED_ENGINE_ENABLE,
+ writel(ASPEED_ADC_OPERATION_MODE_NORMAL | ASPEED_ADC_ENGINE_ENABLE,
data->base + ASPEED_REG_ENGINE_CONTROL);
/* Wait for initial sequence complete. */
@@ -246,7 +260,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)
goto clk_enable_error;
adc_engine_control_reg_val = GENMASK(31, 16) |
- ASPEED_OPERATION_MODE_NORMAL | ASPEED_ENGINE_ENABLE;
+ ASPEED_ADC_OPERATION_MODE_NORMAL | ASPEED_ADC_ENGINE_ENABLE;
writel(adc_engine_control_reg_val,
data->base + ASPEED_REG_ENGINE_CONTROL);
@@ -264,7 +278,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)
return 0;
iio_register_error:
- writel(ASPEED_OPERATION_MODE_POWER_DOWN,
+ writel(ASPEED_ADC_OPERATION_MODE_POWER_DOWN,
data->base + ASPEED_REG_ENGINE_CONTROL);
clk_disable_unprepare(data->clk_scaler->clk);
clk_enable_error:
@@ -283,7 +297,7 @@ static int aspeed_adc_remove(struct platform_device *pdev)
struct aspeed_adc_data *data = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
- writel(ASPEED_OPERATION_MODE_POWER_DOWN,
+ writel(ASPEED_ADC_OPERATION_MODE_POWER_DOWN,
data->base + ASPEED_REG_ENGINE_CONTROL);
clk_disable_unprepare(data->clk_scaler->clk);
reset_control_assert(data->rst);
This patch completes the declare of adc register bitfields and uses the same prefix ASPEED_ADC_* for these bitfields. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> --- drivers/iio/adc/aspeed_adc.c | 40 ++++++++++++++++++++++++------------ 1 file changed, 27 insertions(+), 13 deletions(-)