@@ -52,6 +52,12 @@
#define CNTV_TVAL 0x38
#define CNTV_CTL 0x3c
+/*
+ * The minimum amount of time a generic timer is guaranteed to not roll over
+ * (40 years)
+ */
+#define MIN_ROLLOVER_SECS (40ULL * 365 * 24 * 3600)
+
static unsigned arch_timers_present __initdata;
static void __iomem *arch_counter_base __ro_after_init;
@@ -1004,9 +1010,24 @@ struct arch_timer_kvm_info *arch_timer_get_kvm_info(void)
return &arch_timer_kvm_info;
}
+/*
+ * Makes an educated guess at a valid counter width based on the Generic Timer
+ * specification. Of note:
+ * 1) the Generic Timer is at least 56 bits wide
+ * 2) a roll-over time of not less than 40 years
+ */
+static int __init arch_counter_get_width(void)
+{
+ u64 min_cycles = MIN_ROLLOVER_SECS * arch_timer_get_cntfrq();
+
+ /* guarantee the returned width is within the valid range */
+ return max(56, min(64, ilog2(min_cycles)));
+}
+
static void __init arch_counter_register(unsigned type)
{
u64 start_count;
+ int width;
/* Register the CP15 based counter if we have one */
if (type & ARCH_TIMER_TYPE_CP15) {
@@ -1031,6 +1052,10 @@ static void __init arch_counter_register(unsigned type)
arch_timer_read_counter = arch_counter_get_cntvct_mem;
}
+ width = arch_counter_get_width();
+ clocksource_counter.mask = CLOCKSOURCE_MASK(width);
+ cyclecounter.mask = CLOCKSOURCE_MASK(width);
+
if (!arch_counter_suspend_stop)
clocksource_counter.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP;
start_count = arch_timer_read_counter();
@@ -1040,8 +1065,7 @@ static void __init arch_counter_register(unsigned type)
timecounter_init(&arch_timer_kvm_info.timecounter,
&cyclecounter, start_count);
- /* 56 bits minimum, so we assume worst case rollover */
- sched_clock_register(arch_timer_read_counter, 56, arch_timer_rate);
+ sched_clock_register(arch_timer_read_counter, width, arch_timer_rate);
}
static void arch_timer_stop(struct clock_event_device *clk)
Unfortunately, the architecture provides no means to determine the bit width of the system counter. However, we do know the following from the specification: - the system counter is at least 56 bits wide - Roll-over time of not less than 40 years To date, the arch timer driver has depended on the first property, assuming any system counter to be 56 bits wide and masking off the rest. However, combining a narrow clocksource mask with a high frequency counter could result in prematurely wrapping the system counter by a significant margin. For example, a 56 bit wide, 1GHz system counter would wrap in a mere 2.28 years! This is a problem for two reasons: v8.6+ implementations are required to provide a 64 bit, 1GHz system counter. Furthermore, before v8.6, implementers may select a counter frequency of their choosing. Fix the issue by deriving a valid clock mask based on the second property from above. Set the floor at 56 bits, since we know no system counter is narrower than that. Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Oliver Upton <oupton@google.com> --- This patch was tested with QEMU, tweaked to provide a 1GHz system counter frequency, as I could not easily figure out how to tweak the base FVP to provide a 1GHz counter. Parent commit: 0c32706dac1b ("arm64: stacktrace: avoid tracing arch_stack_walk()") drivers/clocksource/arm_arch_timer.c | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-)