diff mbox series

[4/5] drm/vc4: hdmi: Move the HSM clock enable to runtime_pm

Message ID 20210922125419.4125779-5-maxime@cerno.tech (mailing list archive)
State New, archived
Headers show
Series drm/vc4: hdmi: Remove CPU hangs, take 2 | expand

Commit Message

Maxime Ripard Sept. 22, 2021, 12:54 p.m. UTC 
In order to access the HDMI controller, we need to make sure the HSM
clock is enabled. If we were to access it with the clock disabled, the
CPU would completely hang, resulting in an hard crash.

Since we have different code path that would require it, let's move that
clock enable / disable to runtime_pm that will take care of the
reference counting for us.

Since we also want to change the HSM clock rate and it's only valid
while the clock is disabled, we need to move the clk_set_min_rate() call
on the HSM clock above pm_runtime_get_and_sync().

Fixes: 4f6e3d66ac52 ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 72 ++++++++++++++++++++++------------
 1 file changed, 46 insertions(+), 26 deletions(-)

Comments

Nicolas Saenz Julienne Sept. 30, 2021, 3:54 p.m. UTC | #1 
On Wed, 2021-09-22 at 14:54 +0200, Maxime Ripard wrote:
> In order to access the HDMI controller, we need to make sure the HSM
> clock is enabled. If we were to access it with the clock disabled, the
> CPU would completely hang, resulting in an hard crash.
> 
> Since we have different code path that would require it, let's move that
> clock enable / disable to runtime_pm that will take care of the
> reference counting for us.
> 
> Since we also want to change the HSM clock rate and it's only valid
> while the clock is disabled, we need to move the clk_set_min_rate() call
> on the HSM clock above pm_runtime_get_and_sync().
> 
> Fixes: 4f6e3d66ac52 ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> ---

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Regards,
Nicolas
Maxime Ripard Oct. 13, 2021, 12:59 p.m. UTC | #2 
On Wed, 22 Sep 2021 14:54:18 +0200, Maxime Ripard wrote:
> In order to access the HDMI controller, we need to make sure the HSM
> clock is enabled. If we were to access it with the clock disabled, the
> CPU would completely hang, resulting in an hard crash.
> 
> Since we have different code path that would require it, let's move that
> clock enable / disable to runtime_pm that will take care of the
> reference counting for us.
> 
> [...]

Applied to drm/drm-misc (drm-misc-fixes).

Thanks!
Maxime
diff mbox series

Patch

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 74222b12f8c8..630b84ab73a2 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -628,7 +628,6 @@  static void vc4_hdmi_encoder_post_crtc_powerdown(struct drm_encoder *encoder,
 		vc4_hdmi->variant->phy_disable(vc4_hdmi);
 
 	clk_disable_unprepare(vc4_hdmi->pixel_bvb_clock);
-	clk_disable_unprepare(vc4_hdmi->hsm_clock);
 	clk_disable_unprepare(vc4_hdmi->pixel_clock);
 
 	ret = pm_runtime_put(&vc4_hdmi->pdev->dev);
@@ -894,28 +893,10 @@  static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
 		conn_state_to_vc4_hdmi_conn_state(conn_state);
 	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
 	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
-	unsigned long bvb_rate, pixel_rate, hsm_rate;
+	unsigned long pixel_rate = vc4_conn_state->pixel_rate;
+	unsigned long bvb_rate, hsm_rate;
 	int ret;
 
-	ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev);
-	if (ret < 0) {
-		DRM_ERROR("Failed to retain power domain: %d\n", ret);
-		return;
-	}
-
-	pixel_rate = vc4_conn_state->pixel_rate;
-	ret = clk_set_rate(vc4_hdmi->pixel_clock, pixel_rate);
-	if (ret) {
-		DRM_ERROR("Failed to set pixel clock rate: %d\n", ret);
-		return;
-	}
-
-	ret = clk_prepare_enable(vc4_hdmi->pixel_clock);
-	if (ret) {
-		DRM_ERROR("Failed to turn on pixel clock: %d\n", ret);
-		return;
-	}
-
 	/*
 	 * As stated in RPi's vc4 firmware "HDMI state machine (HSM) clock must
 	 * be faster than pixel clock, infinitesimally faster, tested in
@@ -939,10 +920,21 @@  static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
 		return;
 	}
 
-	ret = clk_prepare_enable(vc4_hdmi->hsm_clock);
+	ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev);
+	if (ret < 0) {
+		DRM_ERROR("Failed to retain power domain: %d\n", ret);
+		return;
+	}
+
+	ret = clk_set_rate(vc4_hdmi->pixel_clock, pixel_rate);
 	if (ret) {
-		DRM_ERROR("Failed to turn on HSM clock: %d\n", ret);
-		clk_disable_unprepare(vc4_hdmi->pixel_clock);
+		DRM_ERROR("Failed to set pixel clock rate: %d\n", ret);
+		return;
+	}
+
+	ret = clk_prepare_enable(vc4_hdmi->pixel_clock);
+	if (ret) {
+		DRM_ERROR("Failed to turn on pixel clock: %d\n", ret);
 		return;
 	}
 
@@ -958,7 +950,6 @@  static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
 	ret = clk_set_min_rate(vc4_hdmi->pixel_bvb_clock, bvb_rate);
 	if (ret) {
 		DRM_ERROR("Failed to set pixel bvb clock rate: %d\n", ret);
-		clk_disable_unprepare(vc4_hdmi->hsm_clock);
 		clk_disable_unprepare(vc4_hdmi->pixel_clock);
 		return;
 	}
@@ -966,7 +957,6 @@  static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
 	ret = clk_prepare_enable(vc4_hdmi->pixel_bvb_clock);
 	if (ret) {
 		DRM_ERROR("Failed to turn on pixel bvb clock: %d\n", ret);
-		clk_disable_unprepare(vc4_hdmi->hsm_clock);
 		clk_disable_unprepare(vc4_hdmi->pixel_clock);
 		return;
 	}
@@ -2107,6 +2097,29 @@  static int vc5_hdmi_init_resources(struct vc4_hdmi *vc4_hdmi)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int vc4_hdmi_runtime_suspend(struct device *dev)
+{
+	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(vc4_hdmi->hsm_clock);
+
+	return 0;
+}
+
+static int vc4_hdmi_runtime_resume(struct device *dev)
+{
+	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(vc4_hdmi->hsm_clock);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+#endif
+
 static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 {
 	const struct vc4_hdmi_variant *variant = of_device_get_match_data(dev);
@@ -2374,11 +2387,18 @@  static const struct of_device_id vc4_hdmi_dt_match[] = {
 	{}
 };
 
+static const struct dev_pm_ops vc4_hdmi_pm_ops = {
+	SET_RUNTIME_PM_OPS(vc4_hdmi_runtime_suspend,
+			   vc4_hdmi_runtime_resume,
+			   NULL)
+};
+
 struct platform_driver vc4_hdmi_driver = {
 	.probe = vc4_hdmi_dev_probe,
 	.remove = vc4_hdmi_dev_remove,
 	.driver = {
 		.name = "vc4_hdmi",
 		.of_match_table = vc4_hdmi_dt_match,
+		.pm = &vc4_hdmi_pm_ops,
 	},
 };