diff mbox series

[04/15] arm64: dts: qcom: msm8916-samsung-serranove: Add IMU

Message ID 20210928171231.12766-5-stephan@gerhold.net (mailing list archive)
State New, archived
Headers show
Series Add support for Samsung Galaxy S4 Mini Value Edition | expand

Commit Message

Stephan Gerhold Sept. 28, 2021, 5:12 p.m. UTC 
Add the STMicroelectronics LSM6DS3 IMU that is used in the S4 Mini VE
to the device tree.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 .../dts/qcom/msm8916-samsung-serranove.dts    | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
index 6689687f544f..73fe7b2a5b66 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
@@ -170,6 +170,21 @@  touchkey@20 {
 	};
 };
 
+&blsp_i2c2 {
+	status = "okay";
+
+	imu@6b {
+		compatible = "st,lsm6ds3";
+		reg = <0x6b>;
+
+		interrupt-parent = <&msmgpio>;
+		interrupts = <115 IRQ_TYPE_EDGE_RISING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&imu_irq_default>;
+	};
+};
+
 &blsp_i2c5 {
 	status = "okay";
 
@@ -372,6 +387,14 @@  gpio_hall_sensor_default: gpio-hall-sensor-default {
 		bias-disable;
 	};
 
+	imu_irq_default: imu-irq-default {
+		pins = "gpio115";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	muic_i2c_default: muic-i2c-default {
 		pins = "gpio105", "gpio106";
 		function = "gpio";