| Message ID | 20210930095225.9718-1-jbx6244@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2,1/3] dt-bindings: pinctrl: convert rockchip, pinctrl.txt to YAML | expand |
On Thu, Sep 30, 2021 at 11:52:23AM +0200, Johan Jonker wrote: > Convert rockchip,pinctrl.txt to YAML > > Signed-off-by: Johan Jonker <jbx6244@gmail.com> > --- > > Changed V2: > Add '|' to maintain the paragraphs. > Change gpio patternProperties. > Move description to items. > Remove type array. > Restyle > --- > .../bindings/pinctrl/rockchip,pinctrl.txt | 114 ------------ > .../bindings/pinctrl/rockchip,pinctrl.yaml | 176 ++++++++++++++++++ > 2 files changed, 176 insertions(+), 114 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt > create mode 100644 Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml > > diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt > deleted file mode 100644 > index 84c411129..000000000 > --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt > +++ /dev/null > @@ -1,114 +0,0 @@ > -* Rockchip Pinmux Controller > - > -The Rockchip Pinmux Controller, enables the IC > -to share one PAD to several functional blocks. The sharing is done by > -multiplexing the PAD input/output signals. For each PAD there are several > -muxing options with option 0 being the use as a GPIO. > - > -Please refer to pinctrl-bindings.txt in this directory for details of the > -common pinctrl bindings used by client devices, including the meaning of the > -phrase "pin configuration node". > - > -The Rockchip pin configuration node is a node of a group of pins which can be > -used for a specific device or function. This node represents both mux and > -config of the pins in that group. The 'pins' selects the function mode(also > -named pin mode) this pin can work on and the 'config' configures various pad > -settings such as pull-up, etc. > - > -The pins are grouped into up to 5 individual pin banks which need to be > -defined as gpio sub-nodes of the pinmux controller. > - > -Required properties for iomux controller: > - - compatible: should be > - "rockchip,px30-pinctrl": for Rockchip PX30 > - "rockchip,rv1108-pinctrl": for Rockchip RV1108 > - "rockchip,rk2928-pinctrl": for Rockchip RK2928 > - "rockchip,rk3066a-pinctrl": for Rockchip RK3066a > - "rockchip,rk3066b-pinctrl": for Rockchip RK3066b > - "rockchip,rk3128-pinctrl": for Rockchip RK3128 > - "rockchip,rk3188-pinctrl": for Rockchip RK3188 > - "rockchip,rk3228-pinctrl": for Rockchip RK3228 > - "rockchip,rk3288-pinctrl": for Rockchip RK3288 > - "rockchip,rk3308-pinctrl": for Rockchip RK3308 > - "rockchip,rk3328-pinctrl": for Rockchip RK3328 > - "rockchip,rk3368-pinctrl": for Rockchip RK3368 > - "rockchip,rk3399-pinctrl": for Rockchip RK3399 > - "rockchip,rk3568-pinctrl": for Rockchip RK3568 > - > - - rockchip,grf: phandle referencing a syscon providing the > - "general register files" > - > -Optional properties for iomux controller: > - - rockchip,pmu: phandle referencing a syscon providing the pmu registers > - as some SoCs carry parts of the iomux controller registers there. > - Required for at least rk3188 and rk3288. On the rk3368 this should > - point to the PMUGRF syscon. > - > -Deprecated properties for iomux controller: > - - reg: first element is the general register space of the iomux controller > - It should be large enough to contain also separate pull registers. > - second element is the separate pull register space of the rk3188. > - Use rockchip,grf and rockchip,pmu described above instead. > - > -Required properties for gpio sub nodes: > -See rockchip,gpio-bank.yaml > - > -Required properties for pin configuration node: > - - rockchip,pins: 3 integers array, represents a group of pins mux and config > - setting. The format is rockchip,pins = <PIN_BANK PIN_BANK_IDX MUX &phandle>. > - The MUX 0 means gpio and MUX 1 to N mean the specific device function. > - The phandle of a node containing the generic pinconfig options > - to use, as described in pinctrl-bindings.txt in this directory. > - > -Examples: > - > -#include <dt-bindings/pinctrl/rockchip.h> > - > -... > - > -pinctrl@20008000 { > - compatible = "rockchip,rk3066a-pinctrl"; > - rockchip,grf = <&grf>; > - > - #address-cells = <1>; > - #size-cells = <1>; > - ranges; > - > - gpio0: gpio0@20034000 { > - compatible = "rockchip,gpio-bank"; > - reg = <0x20034000 0x100>; > - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&clk_gates8 9>; > - > - gpio-controller; > - #gpio-cells = <2>; > - > - interrupt-controller; > - #interrupt-cells = <2>; > - }; > - > - ... > - > - pcfg_pull_default: pcfg_pull_default { > - bias-pull-pin-default > - }; > - > - uart2 { > - uart2_xfer: uart2-xfer { > - rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>, > - <1 RK_PB1 1 &pcfg_pull_default>; > - }; > - }; > -}; > - > -uart2: serial@20064000 { > - compatible = "snps,dw-apb-uart"; > - reg = <0x20064000 0x400>; > - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; > - reg-shift = <2>; > - reg-io-width = <1>; > - clocks = <&mux_uart2>; > - > - pinctrl-names = "default"; > - pinctrl-0 = <&uart2_xfer>; > -}; > diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml > new file mode 100644 > index 000000000..01a62245b > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml > @@ -0,0 +1,176 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pinctrl/rockchip,pinctrl.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Rockchip Pinmux Controller > + > +maintainers: > + - Heiko Stuebner <heiko@sntech.de> > + > +description: | > + The Rockchip Pinmux Controller enables the IC to share one PAD > + to several functional blocks. The sharing is done by multiplexing > + the PAD input/output signals. For each PAD there are several muxing > + options with option 0 being used as a GPIO. > + > + Please refer to pinctrl-bindings.txt in this directory for details of the > + common pinctrl bindings used by client devices, including the meaning of the > + phrase "pin configuration node". > + > + The Rockchip pin configuration node is a node of a group of pins which can be > + used for a specific device or function. This node represents both mux and > + config of the pins in that group. The 'pins' selects the function mode > + (also named pin mode) this pin can work on and the 'config' configures > + various pad settings such as pull-up, etc. > + > + The pins are grouped into up to 9 individual pin banks which need to be > + defined as gpio sub-nodes of the pinmux controller. > + > +properties: > + compatible: > + enum: > + - rockchip,px30-pinctrl > + - rockchip,rk2928-pinctrl > + - rockchip,rk3066a-pinctrl > + - rockchip,rk3066b-pinctrl > + - rockchip,rk3128-pinctrl > + - rockchip,rk3188-pinctrl > + - rockchip,rk3228-pinctrl > + - rockchip,rk3288-pinctrl > + - rockchip,rk3308-pinctrl > + - rockchip,rk3328-pinctrl > + - rockchip,rk3368-pinctrl > + - rockchip,rk3399-pinctrl > + - rockchip,rk3568-pinctrl > + - rockchip,rv1108-pinctrl > + > + rockchip,grf: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: > + The phandle of the syscon node for the GRF registers. > + > + rockchip,pmu: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: > + The phandle of the syscon node for the PMU registers, > + as some SoCs carry parts of the iomux controller registers there. > + Required for at least rk3188 and rk3288. On the rk3368 this should > + point to the PMUGRF syscon. > + > + "#address-cells": > + enum: [1, 2] > + > + "#size-cells": > + enum: [1, 2] > + > + ranges: true > + > +patternProperties: > + "gpio@[0-9a-f]+$": > + type: object > + > + $ref: "/schemas/gpio/rockchip,gpio-bank.yaml#" > + > + unevaluatedProperties: false > + > + "pcfg-[a-z0-9-]+$": > + type: object > + properties: > + bias-disable: true > + > + bias-pull-down: true > + > + bias-pull-pin-default: true > + > + bias-pull-up: true > + > + drive-strength: > + minimum: 0 > + maximum: 20 > + > + input-enable: true > + > + input-schmitt-enable: true > + > + output-high: true > + > + output-low: true > + > + additionalProperties: false > + > +additionalProperties: > + type: object > + additionalProperties: > + type: object > + properties: > + rockchip,pins: Needs a type reference (uint32-matrix). > + minItems: 1 > + items: > + items: > + - minimum: 0 > + maximum: 8 > + description: > + Pin bank. > + - minimum: 0 > + maximum: 31 > + description: > + Pin bank index. > + - minimum: 0 > + maximum: 6 > + description: > + Mux 0 means gpio and mux 1 to N means > + the specific device function. > + - description: > + The phandle of a node contains the generic pinconfig options > + to use as described in pinctrl-bindings.txt. > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/pinctrl/rockchip.h> > + > + pinctrl: pinctrl { > + compatible = "rockchip,rk3066a-pinctrl"; > + rockchip,grf = <&grf>; > + > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + gpio0: gpio@20034000 { > + compatible = "rockchip,gpio-bank"; > + reg = <0x20034000 0x100>; > + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk_gates8 9>; > + > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + pcfg_pull_default: pcfg-pull-default { > + bias-pull-pin-default; > + }; > + > + uart2 { > + uart2_xfer: uart2-xfer { > + rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>, > + <1 RK_PB1 1 &pcfg_pull_default>; > + }; > + }; > + }; > + > + uart2: serial@20064000 { > + compatible = "snps,dw-apb-uart"; > + reg = <0x20064000 0x400>; > + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&mux_uart2>; > + pinctrl-0 = <&uart2_xfer>; > + pinctrl-names = "default"; > + reg-io-width = <1>; > + reg-shift = <2>; > + }; > -- > 2.20.1 > >
diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt deleted file mode 100644 index 84c411129..000000000 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt +++ /dev/null @@ -1,114 +0,0 @@ -* Rockchip Pinmux Controller - -The Rockchip Pinmux Controller, enables the IC -to share one PAD to several functional blocks. The sharing is done by -multiplexing the PAD input/output signals. For each PAD there are several -muxing options with option 0 being the use as a GPIO. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The Rockchip pin configuration node is a node of a group of pins which can be -used for a specific device or function. This node represents both mux and -config of the pins in that group. The 'pins' selects the function mode(also -named pin mode) this pin can work on and the 'config' configures various pad -settings such as pull-up, etc. - -The pins are grouped into up to 5 individual pin banks which need to be -defined as gpio sub-nodes of the pinmux controller. - -Required properties for iomux controller: - - compatible: should be - "rockchip,px30-pinctrl": for Rockchip PX30 - "rockchip,rv1108-pinctrl": for Rockchip RV1108 - "rockchip,rk2928-pinctrl": for Rockchip RK2928 - "rockchip,rk3066a-pinctrl": for Rockchip RK3066a - "rockchip,rk3066b-pinctrl": for Rockchip RK3066b - "rockchip,rk3128-pinctrl": for Rockchip RK3128 - "rockchip,rk3188-pinctrl": for Rockchip RK3188 - "rockchip,rk3228-pinctrl": for Rockchip RK3228 - "rockchip,rk3288-pinctrl": for Rockchip RK3288 - "rockchip,rk3308-pinctrl": for Rockchip RK3308 - "rockchip,rk3328-pinctrl": for Rockchip RK3328 - "rockchip,rk3368-pinctrl": for Rockchip RK3368 - "rockchip,rk3399-pinctrl": for Rockchip RK3399 - "rockchip,rk3568-pinctrl": for Rockchip RK3568 - - - rockchip,grf: phandle referencing a syscon providing the - "general register files" - -Optional properties for iomux controller: - - rockchip,pmu: phandle referencing a syscon providing the pmu registers - as some SoCs carry parts of the iomux controller registers there. - Required for at least rk3188 and rk3288. On the rk3368 this should - point to the PMUGRF syscon. - -Deprecated properties for iomux controller: - - reg: first element is the general register space of the iomux controller - It should be large enough to contain also separate pull registers. - second element is the separate pull register space of the rk3188. - Use rockchip,grf and rockchip,pmu described above instead. - -Required properties for gpio sub nodes: -See rockchip,gpio-bank.yaml - -Required properties for pin configuration node: - - rockchip,pins: 3 integers array, represents a group of pins mux and config - setting. The format is rockchip,pins = <PIN_BANK PIN_BANK_IDX MUX &phandle>. - The MUX 0 means gpio and MUX 1 to N mean the specific device function. - The phandle of a node containing the generic pinconfig options - to use, as described in pinctrl-bindings.txt in this directory. - -Examples: - -#include <dt-bindings/pinctrl/rockchip.h> - -... - -pinctrl@20008000 { - compatible = "rockchip,rk3066a-pinctrl"; - rockchip,grf = <&grf>; - - #address-cells = <1>; - #size-cells = <1>; - ranges; - - gpio0: gpio0@20034000 { - compatible = "rockchip,gpio-bank"; - reg = <0x20034000 0x100>; - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_gates8 9>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - ... - - pcfg_pull_default: pcfg_pull_default { - bias-pull-pin-default - }; - - uart2 { - uart2_xfer: uart2-xfer { - rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>, - <1 RK_PB1 1 &pcfg_pull_default>; - }; - }; -}; - -uart2: serial@20064000 { - compatible = "snps,dw-apb-uart"; - reg = <0x20064000 0x400>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&mux_uart2>; - - pinctrl-names = "default"; - pinctrl-0 = <&uart2_xfer>; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml new file mode 100644 index 000000000..01a62245b --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml @@ -0,0 +1,176 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/rockchip,pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip Pinmux Controller + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +description: | + The Rockchip Pinmux Controller enables the IC to share one PAD + to several functional blocks. The sharing is done by multiplexing + the PAD input/output signals. For each PAD there are several muxing + options with option 0 being used as a GPIO. + + Please refer to pinctrl-bindings.txt in this directory for details of the + common pinctrl bindings used by client devices, including the meaning of the + phrase "pin configuration node". + + The Rockchip pin configuration node is a node of a group of pins which can be + used for a specific device or function. This node represents both mux and + config of the pins in that group. The 'pins' selects the function mode + (also named pin mode) this pin can work on and the 'config' configures + various pad settings such as pull-up, etc. + + The pins are grouped into up to 9 individual pin banks which need to be + defined as gpio sub-nodes of the pinmux controller. + +properties: + compatible: + enum: + - rockchip,px30-pinctrl + - rockchip,rk2928-pinctrl + - rockchip,rk3066a-pinctrl + - rockchip,rk3066b-pinctrl + - rockchip,rk3128-pinctrl + - rockchip,rk3188-pinctrl + - rockchip,rk3228-pinctrl + - rockchip,rk3288-pinctrl + - rockchip,rk3308-pinctrl + - rockchip,rk3328-pinctrl + - rockchip,rk3368-pinctrl + - rockchip,rk3399-pinctrl + - rockchip,rk3568-pinctrl + - rockchip,rv1108-pinctrl + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle of the syscon node for the GRF registers. + + rockchip,pmu: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle of the syscon node for the PMU registers, + as some SoCs carry parts of the iomux controller registers there. + Required for at least rk3188 and rk3288. On the rk3368 this should + point to the PMUGRF syscon. + + "#address-cells": + enum: [1, 2] + + "#size-cells": + enum: [1, 2] + + ranges: true + +patternProperties: + "gpio@[0-9a-f]+$": + type: object + + $ref: "/schemas/gpio/rockchip,gpio-bank.yaml#" + + unevaluatedProperties: false + + "pcfg-[a-z0-9-]+$": + type: object + properties: + bias-disable: true + + bias-pull-down: true + + bias-pull-pin-default: true + + bias-pull-up: true + + drive-strength: + minimum: 0 + maximum: 20 + + input-enable: true + + input-schmitt-enable: true + + output-high: true + + output-low: true + + additionalProperties: false + +additionalProperties: + type: object + additionalProperties: + type: object + properties: + rockchip,pins: + minItems: 1 + items: + items: + - minimum: 0 + maximum: 8 + description: + Pin bank. + - minimum: 0 + maximum: 31 + description: + Pin bank index. + - minimum: 0 + maximum: 6 + description: + Mux 0 means gpio and mux 1 to N means + the specific device function. + - description: + The phandle of a node contains the generic pinconfig options + to use as described in pinctrl-bindings.txt. + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/rockchip.h> + + pinctrl: pinctrl { + compatible = "rockchip,rk3066a-pinctrl"; + rockchip,grf = <&grf>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio@20034000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20034000 0x100>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 9>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_default: pcfg-pull-default { + bias-pull-pin-default; + }; + + uart2 { + uart2_xfer: uart2-xfer { + rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>, + <1 RK_PB1 1 &pcfg_pull_default>; + }; + }; + }; + + uart2: serial@20064000 { + compatible = "snps,dw-apb-uart"; + reg = <0x20064000 0x400>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mux_uart2>; + pinctrl-0 = <&uart2_xfer>; + pinctrl-names = "default"; + reg-io-width = <1>; + reg-shift = <2>; + };
Convert rockchip,pinctrl.txt to YAML Signed-off-by: Johan Jonker <jbx6244@gmail.com> --- Changed V2: Add '|' to maintain the paragraphs. Change gpio patternProperties. Move description to items. Remove type array. Restyle --- .../bindings/pinctrl/rockchip,pinctrl.txt | 114 ------------ .../bindings/pinctrl/rockchip,pinctrl.yaml | 176 ++++++++++++++++++ 2 files changed, 176 insertions(+), 114 deletions(-) delete mode 100644 Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml