diff mbox series

arm64: dts: allwinner: NanoPi R1S H5: use the correct compatible for the eeprom

Message ID 20211001145036.18129-1-amadeus@jmu.edu.cn (mailing list archive)
State New, archived
Headers show
Series arm64: dts: allwinner: NanoPi R1S H5: use the correct compatible for the eeprom | expand

Commit Message

Chukun Pan Oct. 1, 2021, 2:50 p.m. UTC
The 'microchip,24c02' compatible does not match the at24 driver, so
replace it with 'atmel,24c02'. In addition, because the mac address
is stored on this eeprom, set it to read-only mode.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
---
 arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

Comments

Chen-Yu Tsai Oct. 5, 2021, 5:48 p.m. UTC | #1
Hi,

On Fri, Oct 1, 2021 at 10:51 PM Chukun Pan <amadeus@jmu.edu.cn> wrote:
>
> The 'microchip,24c02' compatible does not match the at24 driver, so
> replace it with 'atmel,24c02'. In addition, because the mac address
> is stored on this eeprom, set it to read-only mode.
>
> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
> ---
>  arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
> index 55bcdf8d1a07..4f01c17c49e0 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
> @@ -142,9 +142,10 @@
>         status = "okay";
>
>         eeprom@51 {
> -               compatible = "microchip,24c02";
> -               reg = <0x51>;
> +               compatible = "atmel,24c02";

You should add the atmel compatible as a fallback one, not replace the
microchip one.

Also FTR 24c02 is not the correct part number. It is 24aa025e48.


>                 pagesize = <16>;
> +               reg = <0x51>;

Please don't move the reg property. It should follow the compatible.

> +               read-only; /* This holds our MAC */

Please also add a cell representing the MAC address, and hook it up
to the GMAC. You can find an example here [1].

Regards
ChenYu

[1] https://lore.kernel.org/linux-rockchip/20210622034505.18824-1-cnsztl@gmail.com/

>         };
>  };
>
> --
> 2.17.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
index 55bcdf8d1a07..4f01c17c49e0 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
@@ -142,9 +142,10 @@ 
 	status = "okay";
 
 	eeprom@51 {
-		compatible = "microchip,24c02";
-		reg = <0x51>;
+		compatible = "atmel,24c02";
 		pagesize = <16>;
+		reg = <0x51>;
+		read-only; /* This holds our MAC */
 	};
 };