| Message ID | 20211005134902.2138731-8-martin.kepplinger@puri.sm (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: imx8mq-librem5: wifi updates and minor fixes | expand |
On Tue, Oct 05, 2021 at 03:49:02PM +0200, Martin Kepplinger wrote: > From: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> > > The default of 5ms is too low. > > Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Your SoB is missing here. I fixed it up and applied the series, thanks! Shawn > --- > arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi > index d86486fd659d..60d47c71499b 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi > @@ -40,12 +40,14 @@ vol-down { > label = "VOL_DOWN"; > gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; > linux,code = <KEY_VOLUMEDOWN>; > + debounce-interval = <50>; > }; > > vol-up { > label = "VOL_UP"; > gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; > linux,code = <KEY_VOLUMEUP>; > + debounce-interval = <50>; > }; > }; > > -- > 2.30.2 >
Am Freitag, dem 15.10.2021 um 09:46 +0800 schrieb Shawn Guo: > On Tue, Oct 05, 2021 at 03:49:02PM +0200, Martin Kepplinger wrote: > > From: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> > > > > The default of 5ms is too low. > > > > Signed-off-by: Sebastian Krzyszkowiak > > <sebastian.krzyszkowiak@puri.sm> > > Your SoB is missing here. I fixed it up and applied the series, > thanks! > > Shawn thank you very much, of course I sign-off on this. martin
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index d86486fd659d..60d47c71499b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -40,12 +40,14 @@ vol-down { label = "VOL_DOWN"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <50>; }; vol-up { label = "VOL_UP"; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; + debounce-interval = <50>; }; };