Message ID | 20211006132309.1239708-6-alexander.stein@ew.tq-group.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Support for some TQMa8M* boards | expand |
On Wed, Oct 06, 2021 at 03:23:07PM +0200, Alexander Stein wrote: > This adds support for TQMa8MQNL module on MBa8Mx board. > > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> > --- > arch/arm64/boot/dts/freescale/Makefile | 1 + > .../dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts | 283 ++++++++++++++ > .../boot/dts/freescale/imx8mn-tqma8mqnl.dtsi | 345 ++++++++++++++++++ > 3 files changed, 629 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts > create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > index 032588e83f12..ed166e6d20f6 100644 > --- a/arch/arm64/boot/dts/freescale/Makefile > +++ b/arch/arm64/boot/dts/freescale/Makefile > @@ -48,6 +48,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7902.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb > +dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb > diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts > new file mode 100644 > index 000000000000..3733f79b29cf > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts > @@ -0,0 +1,283 @@ > +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) > +/* > + * Copyright 2020-2021 TQ-Systems GmbH > + */ > + > +/dts-v1/; > + > +#include "imx8mn-tqma8mqnl.dtsi" > +#include "mba8mx.dtsi" > + > +/ { > + model = "TQ-Systems GmbH i.MX8MN TQMa8MxNL on MBa8Mx"; > + compatible = "tq,imx8mn-tqma8mqnl-mba8mx", "tq,imx8mn-tqma8mqnl", "fsl,imx8mn"; > + > + aliases { > + eeprom0 = &eeprom3; > + mmc0 = &usdhc3; > + mmc1 = &usdhc2; > + mmc2 = &usdhc1; > + rtc0 = &pcf85063; > + rtc1 = &snvs_rtc; > + }; > + > + reg_usdhc2_vmmc: regulator-vmmc { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; > + regulator-name = "VSD_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + startup-delay-us = <100>; > + off-on-delay-us = <12000>; > + }; > +}; > + > +&codec { > + clock-names = "mclk"; > + clocks = <&clk IMX8MN_CLK_SAI3_ROOT>; One level indent is enough. > +}; > + > +/* Located on TQMa8MxML-ADAP */ > +&gpio2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usb0hub_sel>; > + > + sel-usb-hub-hog { > + gpio-hog; > + gpios = <1 GPIO_ACTIVE_HIGH>; > + output-high; > + }; > +}; > + > +&i2c1 { > + expander2: gpio@27 { > + compatible = "nxp,pca9555"; > + reg = <0x27>; > + gpio-controller; > + #gpio-cells = <2>; > + vcc-supply = <®_vcc_3v3>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_expander2>; > + interrupt-parent = <&gpio1>; > + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > +}; > + > +&sai3 { > + assigned-clocks = <&clk IMX8MN_CLK_SAI3>; > + assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>; > + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k"; > + clocks = <&clk IMX8MN_CLK_SAI3_IPG>, <&clk IMX8MN_CLK_DUMMY>, > + <&clk IMX8MN_CLK_SAI3_ROOT>, <&clk IMX8MN_CLK_DUMMY>, > + <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_AUDIO_PLL1_OUT>, > + <&clk IMX8MN_AUDIO_PLL2_OUT>; > +}; > + > +&usbotg1 { > + dr_mode = "host"; > + disable-over-current; > + power-active-high; > + status = "okay"; > +}; > + > +&iomuxc { > + pinctrl_ecspi1: ecspi1grp { > + fsl,pins = < > + MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x00000146 > + MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x00000146 > + MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x00000146 > + MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x00000146 > + >; > + }; > + > + pinctrl_ecspi2: ecspi2grp { > + fsl,pins = < > + MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x00000146 > + MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x00000146 > + MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x00000146 > + MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x00000146 > + >; > + }; > + > + pinctrl_expander2: expander2grp { > + fsl,pins = < > + MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x94 > + >; > + }; > + > + pinctrl_fec1: fec1grp { > + fsl,pins = < > + MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x40000002 > + MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x40000002 > + MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x14 > + MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x14 > + MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x14 > + MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x14 > + MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x90 > + MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x90 > + MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x90 > + MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x90 > + MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x14 > + MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x90 > + MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x90 > + MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x14 > + >; > + }; > + > + pinctrl_gpiobutton: gpiobuttongrp { > + fsl,pins = < > + MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x84 > + MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x84 > + MX8MN_IOMUXC_SD1_CLK_GPIO2_IO0 0x84 > + >; > + }; > + > + pinctrl_gpioled: gpioledgrp { > + fsl,pins = < > + MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x84 > + MX8MN_IOMUXC_NAND_DQS_GPIO3_IO14 0x84 > + >; > + }; > + > + pinctrl_i2c2: i2c2grp { > + fsl,pins = < > + MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001C4 > + MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001C4 > + >; > + }; > + > + pinctrl_i2c2_gpio: i2c2gpiogrp { > + fsl,pins = < > + MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16 0x400001C4 > + MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17 0x400001C4 > + >; > + }; > + > + pinctrl_i2c3: i2c3grp { > + fsl,pins = < > + MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001C4 > + MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001C4 > + >; > + }; > + > + pinctrl_i2c3_gpio: i2c3gpiogrp { > + fsl,pins = < > + MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18 0x400001C4 > + MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19 0x400001C4 > + >; > + }; > + > + pinctrl_pwm3: pwm3grp { > + fsl,pins = < > + MX8MN_IOMUXC_GPIO1_IO14_PWM3_OUT 0x14 > + >; > + }; > + > + pinctrl_pwm4: pwm4grp { > + fsl,pins = < > + MX8MN_IOMUXC_GPIO1_IO15_PWM4_OUT 0x14 > + >; > + }; > + > + pinctrl_sai3: sai3grp { > + fsl,pins = < > + MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK 0x94 > + MX8MN_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0x94 > + MX8MN_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC 0x94 > + MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0x94 > + MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0x94 > + MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0x94 > + MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0x94 > + >; > + }; > + > + pinctrl_uart1: uart1grp { > + fsl,pins = < > + MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x16 > + MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x16 > + >; > + }; > + > + pinctrl_uart2: uart2grp { > + fsl,pins = < > + MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x16 > + MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x16 > + >; > + }; > + > + pinctrl_uart3: uart3grp { > + fsl,pins = < > + MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX 0x16 > + MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX 0x16 > + >; > + }; > + > + pinctrl_uart4: uart4grp { > + fsl,pins = < > + MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX 0x16 > + MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX 0x16 > + >; > + }; > + > + pinctrl_usb0hub_sel: usb0hub_sel { Doesn't match 'grp$' pattern. > + fsl,pins = < > + /* SEL_USB_HUB_B */ > + MX8MN_IOMUXC_SD1_CMD_GPIO2_IO1 0x84 > + >; > + }; > + > + pinctrl_usbotg: usbotggrp { > + fsl,pins = < > + MX8MN_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x84 > + MX8MN_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x84 > + MX8MN_IOMUXC_GPIO1_IO10_USB1_OTG_ID 0x1C4 > + >; > + }; > + > + pinctrl_usdhc2: usdhc2grp { > + fsl,pins = < > + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x1d4 > + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 > + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 > + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 > + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 > + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 > + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x84 > + >; > + }; > + > + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { > + fsl,pins = < > + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x1d4 > + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 > + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 > + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 > + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 > + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 > + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x84 > + >; > + }; > + > + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { > + fsl,pins = < > + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x1d4 > + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 > + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 > + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 > + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 > + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 > + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x84 > + >; > + }; > + > + pinctrl_usdhc2_gpio: usdhc2grpgpio { > + fsl,pins = < > + MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12 0x84 > + >; > + }; > +}; > diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi > new file mode 100644 > index 000000000000..ab474529d66f > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi > @@ -0,0 +1,345 @@ > +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) > +/* > + * Copyright 2020-2021 TQ-Systems GmbH > + */ > + > +#include "imx8mn.dtsi" > + > +/ { > + model = "TQ-Systems i.MX8MN TQMa8MxNL"; > + compatible = "tq,imx8mn-tqma8mqnl", "fsl,imx8mn"; > + > + chosen { > + }; Really needed? > + > + memory@40000000 { > + device_type = "memory"; > + /* our minimum RAM config will be 1024 MiB */ > + reg = <0x00000000 0x40000000 0 0x40000000>; > + }; > + > + /* e-MMC IO, needed for HS modes */ > + reg_vcc1v8: regulator-vcc1v8 { > + compatible = "regulator-fixed"; > + regulator-name = "TQMA8MXNL_VCC1V8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; always-on is meaningless for a fixed regulator that doesn't have any on/off control. Shawn > + }; > + > + reg_vcc3v3: regulator-vcc3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "TQMA8MXNL_VCC3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + /* global autoconfigured region for contiguous allocations */ > + linux,cma { > + compatible = "shared-dma-pool"; > + reusable; > + /* 640 MiB */ > + size = <0 0x28000000>; > + /* 1024 - 128 MiB, our minimum RAM config will be 1024 MiB */ > + alloc-ranges = <0 0x40000000 0 0x78000000>; > + linux,cma-default; > + }; > + }; > +}; > + > +&A53_0 { > + cpu-supply = <&buck2_reg>; > +}; > + > +&flexspi { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flexspi>; > + status = "okay"; > + > + flash0: flash@0 { > + compatible = "jedec,spi-nor"; > + reg = <0>; > + #address-cells = <1>; > + #size-cells = <1>; > + spi-max-frequency = <84000000>; > + spi-tx-bus-width = <4>; > + spi-rx-bus-width = <4>; > + }; > +}; > + > +&i2c1 { > + clock-frequency = <100000>; > + pinctrl-names = "default", "gpio"; > + pinctrl-0 = <&pinctrl_i2c1>; > + pinctrl-1 = <&pinctrl_i2c1_gpio>; > + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; > + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; > + status = "okay"; > + > + sensor0: temperature-sensor-eeprom@1b { > + compatible = "nxp,se97", "jedec,jc-42.4-temp"; > + reg = <0x1b>; > + }; > + > + pca9450: pmic@25 { > + compatible = "nxp,pca9450a"; > + reg = <0x25>; > + > + /* PMIC PCA9450 PMIC_nINT GPIO1_IO08 */ > + pinctrl-0 = <&pinctrl_pmic>; > + pinctrl-names = "default"; > + interrupt-parent = <&gpio1>; > + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; > + > + regulators { > + /* V_0V85_SOC: 0.85 .. 0.95 */ > + buck1_reg: BUCK1 { > + regulator-name = "BUCK1"; > + regulator-min-microvolt = <850000>; > + regulator-max-microvolt = <950000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <3125>; > + }; > + > + /* VDD_ARM */ > + buck2_reg: BUCK2 { > + regulator-name = "BUCK2"; > + regulator-min-microvolt = <850000>; > + regulator-max-microvolt = <1000000>; > + regulator-boot-on; > + regulator-always-on; > + nxp,dvs-run-voltage = <950000>; > + nxp,dvs-standby-voltage = <850000>; > + regulator-ramp-delay = <3125>; > + }; > + > + /* V_0V85_GPU / DRAM: shall be equal to BUCK1 for i.MX8MN */ > + buck3_reg: BUCK3 { > + regulator-name = "BUCK3"; > + regulator-min-microvolt = <850000>; > + regulator-max-microvolt = <950000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <3125>; > + }; > + > + /* VCC3V3 -> VMMC, ... must not be changed */ > + buck4_reg: BUCK4 { > + regulator-name = "BUCK4"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* V_1V8 -> VQMMC, SPI-NOR, ... must not be changed */ > + buck5_reg: BUCK5 { > + regulator-name = "BUCK5"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* V_1V1 -> RAM, ... must not be changed */ > + buck6_reg: BUCK6 { > + regulator-name = "BUCK6"; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1100000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* V_1V8_SNVS */ > + ldo1_reg: LDO1 { > + regulator-name = "LDO1"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* V_0V8_SNVS */ > + ldo2_reg: LDO2 { > + regulator-name = "LDO2"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <850000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* V_1V8_ANA */ > + ldo3_reg: LDO3 { > + regulator-name = "LDO3"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* V_0V9_MIPI */ > + ldo4_reg: LDO4 { > + regulator-name = "LDO4"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* VCC SD IO - switched using SD2 VSELECT */ > + ldo5_reg: LDO5 { > + regulator-name = "LDO5"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + }; > + }; > + }; > + > + pcf85063: rtc@51 { > + compatible = "nxp,pcf85063a"; > + reg = <0x51>; > + quartz-load-femtofarads = <7000>; > + }; > + > + eeprom1: eeprom@53 { > + compatible = "nxp,se97b", "atmel,24c02"; > + read-only; > + reg = <0x53>; > + pagesize = <16>; > + }; > + > + eeprom0: eeprom@57 { > + compatible = "atmel,24c64"; > + reg = <0x57>; > + pagesize = <32>; > + }; > +}; > + > +&usdhc3 { > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = <&pinctrl_usdhc3>; > + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; > + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; > + bus-width = <8>; > + non-removable; > + no-sd; > + no-sdio; > + vmmc-supply = <®_vcc3v3>; > + vqmmc-supply = <®_vcc1v8>; > + status = "okay"; > +}; > + > +/* > + * Attention: > + * wdog reset is routed to PMIC, PMIC must be preconfigured to force POR > + * without LDO for SNVS. GPIO1_IO02 must not be used as GPIO. > + */ > +&wdog1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wdog>; > + fsl,ext-reset-output; > + status = "okay"; > +}; > + > +&iomuxc { > + pinctrl_flexspi: flexspigrp { > + fsl,pins = < > + MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x84 > + MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x84 > + MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x84 > + MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x84 > + MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x84 > + MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x84 > + >; > + }; > + > + pinctrl_i2c1: i2c1grp { > + fsl,pins = < > + MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c4 > + MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c4 > + >; > + }; > + > + pinctrl_i2c1_gpio: i2c1gpiogrp { > + fsl,pins = < > + MX8MN_IOMUXC_I2C1_SCL_GPIO5_IO14 0x400001c4 > + MX8MN_IOMUXC_I2C1_SDA_GPIO5_IO15 0x400001c4 > + >; > + }; > + > + pinctrl_pmic: pmicgrp { > + fsl,pins = < > + MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x84 > + >; > + }; > + > + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { > + fsl,pins = < > + MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x84 > + >; > + }; > + > + pinctrl_usdhc3: usdhc3grp { > + fsl,pins = < > + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x1d4 > + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d2 > + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 > + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 > + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 > + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 > + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 > + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 > + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 > + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 > + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x84 > + MX8MN_IOMUXC_NAND_READY_B_USDHC3_RESET_B 0x84 > + >; > + }; > + > + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { > + fsl,pins = < > + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x1d2 > + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d2 > + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 > + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 > + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 > + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 > + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 > + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 > + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 > + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 > + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x84 > + MX8MN_IOMUXC_NAND_READY_B_USDHC3_RESET_B 0x84 > + >; > + }; > + > + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { > + fsl,pins = < > + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x1d6 > + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d2 > + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 > + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 > + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 > + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 > + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 > + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 > + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 > + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 > + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x84 > + MX8MN_IOMUXC_NAND_READY_B_USDHC3_RESET_B 0x84 > + >; > + }; > + > + pinctrl_wdog: wdoggrp { > + fsl,pins = < > + MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x84 > + >; > + }; > +}; > -- > 2.25.1 >
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 032588e83f12..ed166e6d20f6 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -48,6 +48,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7902.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts new file mode 100644 index 000000000000..3733f79b29cf --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts @@ -0,0 +1,283 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2020-2021 TQ-Systems GmbH + */ + +/dts-v1/; + +#include "imx8mn-tqma8mqnl.dtsi" +#include "mba8mx.dtsi" + +/ { + model = "TQ-Systems GmbH i.MX8MN TQMa8MxNL on MBa8Mx"; + compatible = "tq,imx8mn-tqma8mqnl-mba8mx", "tq,imx8mn-tqma8mqnl", "fsl,imx8mn"; + + aliases { + eeprom0 = &eeprom3; + mmc0 = &usdhc3; + mmc1 = &usdhc2; + mmc2 = &usdhc1; + rtc0 = &pcf85063; + rtc1 = &snvs_rtc; + }; + + reg_usdhc2_vmmc: regulator-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100>; + off-on-delay-us = <12000>; + }; +}; + +&codec { + clock-names = "mclk"; + clocks = <&clk IMX8MN_CLK_SAI3_ROOT>; +}; + +/* Located on TQMa8MxML-ADAP */ +&gpio2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0hub_sel>; + + sel-usb-hub-hog { + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-high; + }; +}; + +&i2c1 { + expander2: gpio@27 { + compatible = "nxp,pca9555"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <®_vcc_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_expander2>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&sai3 { + assigned-clocks = <&clk IMX8MN_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k"; + clocks = <&clk IMX8MN_CLK_SAI3_IPG>, <&clk IMX8MN_CLK_DUMMY>, + <&clk IMX8MN_CLK_SAI3_ROOT>, <&clk IMX8MN_CLK_DUMMY>, + <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_AUDIO_PLL1_OUT>, + <&clk IMX8MN_AUDIO_PLL2_OUT>; +}; + +&usbotg1 { + dr_mode = "host"; + disable-over-current; + power-active-high; + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x00000146 + MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x00000146 + MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x00000146 + MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x00000146 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x00000146 + MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x00000146 + MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x00000146 + MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x00000146 + >; + }; + + pinctrl_expander2: expander2grp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x94 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x40000002 + MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x40000002 + MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x14 + MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x14 + MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x14 + MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x14 + MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x90 + MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x90 + MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x90 + MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x90 + MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x14 + MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x90 + MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x90 + MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x14 + >; + }; + + pinctrl_gpiobutton: gpiobuttongrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x84 + MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x84 + MX8MN_IOMUXC_SD1_CLK_GPIO2_IO0 0x84 + >; + }; + + pinctrl_gpioled: gpioledgrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x84 + MX8MN_IOMUXC_NAND_DQS_GPIO3_IO14 0x84 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001C4 + MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001C4 + >; + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16 0x400001C4 + MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17 0x400001C4 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001C4 + MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001C4 + >; + }; + + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = < + MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18 0x400001C4 + MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19 0x400001C4 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO14_PWM3_OUT 0x14 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO15_PWM4_OUT 0x14 + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK 0x94 + MX8MN_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0x94 + MX8MN_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC 0x94 + MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0x94 + MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0x94 + MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0x94 + MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0x94 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x16 + MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x16 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x16 + MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x16 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX 0x16 + MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX 0x16 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX 0x16 + MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX 0x16 + >; + }; + + pinctrl_usb0hub_sel: usb0hub_sel { + fsl,pins = < + /* SEL_USB_HUB_B */ + MX8MN_IOMUXC_SD1_CMD_GPIO2_IO1 0x84 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x84 + MX8MN_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x84 + MX8MN_IOMUXC_GPIO1_IO10_USB1_OTG_ID 0x1C4 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x1d4 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x84 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x1d4 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x84 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x1d4 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x84 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < + MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12 0x84 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi new file mode 100644 index 000000000000..ab474529d66f --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi @@ -0,0 +1,345 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2020-2021 TQ-Systems GmbH + */ + +#include "imx8mn.dtsi" + +/ { + model = "TQ-Systems i.MX8MN TQMa8MxNL"; + compatible = "tq,imx8mn-tqma8mqnl", "fsl,imx8mn"; + + chosen { + }; + + memory@40000000 { + device_type = "memory"; + /* our minimum RAM config will be 1024 MiB */ + reg = <0x00000000 0x40000000 0 0x40000000>; + }; + + /* e-MMC IO, needed for HS modes */ + reg_vcc1v8: regulator-vcc1v8 { + compatible = "regulator-fixed"; + regulator-name = "TQMA8MXNL_VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_vcc3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "TQMA8MXNL_VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + /* 640 MiB */ + size = <0 0x28000000>; + /* 1024 - 128 MiB, our minimum RAM config will be 1024 MiB */ + alloc-ranges = <0 0x40000000 0 0x78000000>; + linux,cma-default; + }; + }; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; +}; + +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi>; + status = "okay"; + + flash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <84000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + sensor0: temperature-sensor-eeprom@1b { + compatible = "nxp,se97", "jedec,jc-42.4-temp"; + reg = <0x1b>; + }; + + pca9450: pmic@25 { + compatible = "nxp,pca9450a"; + reg = <0x25>; + + /* PMIC PCA9450 PMIC_nINT GPIO1_IO08 */ + pinctrl-0 = <&pinctrl_pmic>; + pinctrl-names = "default"; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + + regulators { + /* V_0V85_SOC: 0.85 .. 0.95 */ + buck1_reg: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + /* VDD_ARM */ + buck2_reg: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + regulator-ramp-delay = <3125>; + }; + + /* V_0V85_GPU / DRAM: shall be equal to BUCK1 for i.MX8MN */ + buck3_reg: BUCK3 { + regulator-name = "BUCK3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + /* VCC3V3 -> VMMC, ... must not be changed */ + buck4_reg: BUCK4 { + regulator-name = "BUCK4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_1V8 -> VQMMC, SPI-NOR, ... must not be changed */ + buck5_reg: BUCK5 { + regulator-name = "BUCK5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_1V1 -> RAM, ... must not be changed */ + buck6_reg: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_1V8_SNVS */ + ldo1_reg: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_0V8_SNVS */ + ldo2_reg: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_1V8_ANA */ + ldo3_reg: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_0V9_MIPI */ + ldo4_reg: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VCC SD IO - switched using SD2 VSELECT */ + ldo5_reg: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + pcf85063: rtc@51 { + compatible = "nxp,pcf85063a"; + reg = <0x51>; + quartz-load-femtofarads = <7000>; + }; + + eeprom1: eeprom@53 { + compatible = "nxp,se97b", "atmel,24c02"; + read-only; + reg = <0x53>; + pagesize = <16>; + }; + + eeprom0: eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <32>; + }; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc1v8>; + status = "okay"; +}; + +/* + * Attention: + * wdog reset is routed to PMIC, PMIC must be preconfigured to force POR + * without LDO for SNVS. GPIO1_IO02 must not be used as GPIO. + */ +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_flexspi: flexspigrp { + fsl,pins = < + MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x84 + MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x84 + MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x84 + MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x84 + MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x84 + MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x84 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c4 + MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c4 + >; + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX8MN_IOMUXC_I2C1_SCL_GPIO5_IO14 0x400001c4 + MX8MN_IOMUXC_I2C1_SDA_GPIO5_IO15 0x400001c4 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x84 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { + fsl,pins = < + MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x84 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x1d4 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d2 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x84 + MX8MN_IOMUXC_NAND_READY_B_USDHC3_RESET_B 0x84 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x1d2 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d2 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x84 + MX8MN_IOMUXC_NAND_READY_B_USDHC3_RESET_B 0x84 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x1d6 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d2 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x84 + MX8MN_IOMUXC_NAND_READY_B_USDHC3_RESET_B 0x84 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x84 + >; + }; +};
This adds support for TQMa8MQNL module on MBa8Mx board. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> --- arch/arm64/boot/dts/freescale/Makefile | 1 + .../dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts | 283 ++++++++++++++ .../boot/dts/freescale/imx8mn-tqma8mqnl.dtsi | 345 ++++++++++++++++++ 3 files changed, 629 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi