@@ -1,14 +1,9 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-// Copyright (C) 2020 Purism SPC <kernel@puri.sm>
+// Copyright (C) 2021 Purism SPC <kernel@puri.sm>
/dts-v1/;
-#include "imx8mq-librem5.dtsi"
-
-/ {
- model = "Purism Librem 5r3";
- compatible = "purism,librem5r3", "purism,librem5", "fsl,imx8mq";
-};
+#include "imx8mq-librem5-r3.dtsi"
&a53_opp_table {
opp-1000000000 {
@@ -16,22 +11,6 @@ opp-1000000000 {
};
};
-&accel_gyro {
- mount-matrix = "1", "0", "0",
- "0", "1", "0",
- "0", "0", "-1";
-};
-
-&bq25895 {
- ti,battery-regulation-voltage = <4200000>; /* uV */
- ti,charge-current = <1500000>; /* uA */
- ti,termination-current = <144000>; /* uA */
-};
-
&buck3_reg {
regulator-always-on;
};
-
-&proximity {
- proximity-near-level = <25>;
-};
new file mode 100644
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2021 Purism SPC <kernel@puri.sm>
+
+/dts-v1/;
+
+/*
+ * This file describes hardware that is shared among r3 ("Dogwood") and
+ * later revisions of the Librem 5 so it has to be included in dts there.
+ */
+
+#include "imx8mq-librem5.dtsi"
+
+/ {
+ model = "Purism Librem 5r3";
+ compatible = "purism,librem5r3", "purism,librem5", "fsl,imx8mq";
+};
+
+&accel_gyro {
+ mount-matrix = "1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "-1";
+};
+
+&bq25895 {
+ ti,battery-regulation-voltage = <4200000>; /* uV */
+ ti,charge-current = <1500000>; /* uA */
+ ti,termination-current = <144000>; /* uA */
+};
+
+&proximity {
+ proximity-near-level = <25>;
+};
@@ -1,31 +1,19 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-// Copyright (C) 2020 Purism SPC <kernel@puri.sm>
+// Copyright (C) 2021 Purism SPC <kernel@puri.sm>
/dts-v1/;
-#include "imx8mq-librem5.dtsi"
+#include "imx8mq-librem5-r3.dtsi"
/ {
model = "Purism Librem 5r4";
compatible = "purism,librem5r4", "purism,librem5", "fsl,imx8mq";
};
-&accel_gyro {
- mount-matrix = "1", "0", "0",
- "0", "1", "0",
- "0", "0", "-1";
-};
-
&bat {
maxim,rsns-microohm = <1667>;
};
-&bq25895 {
- ti,battery-regulation-voltage = <4200000>; /* uV */
- ti,charge-current = <1500000>; /* uA */
- ti,termination-current = <144000>; /* uA */
-};
-
&led_backlight {
led-max-microamp = <25000>;
};
The Librem 5 r3 ("Dogwood") and r4 ("Evergreen") revisions are quite similar. Add a shared imx8mq-librem5-r3.dtsi description to be included in r3 and later dts files in order to avoid duplication. This is no change in the descriptions but only refactoring. Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> --- .../boot/dts/freescale/imx8mq-librem5-r3.dts | 25 ++------------- .../boot/dts/freescale/imx8mq-librem5-r3.dtsi | 32 +++++++++++++++++++ .../boot/dts/freescale/imx8mq-librem5-r4.dts | 16 ++-------- 3 files changed, 36 insertions(+), 37 deletions(-) create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi