diff mbox series

[v2,4/6] arm64: dts: imx8mm-kontron: Fix polarity of reg_rst_eth2

Message ID 20211015124841.28226-5-frieder@fris.de (mailing list archive)
State New, archived
Headers show
Series Devicetree fixes and additions for Kontron SL/BL i.MX8MM boards | expand

Commit Message

Frieder Schrempf Oct. 15, 2021, 12:48 p.m. UTC 
From: Frieder Schrempf <frieder.schrempf@kontron.de>

The regulator reg_rst_eth2 should keep the reset signal of the USB ethernet
adapter deasserted anytime. Fix the polarity and mark it as always-on.

Anyway, using the regulator is only a workaround for the missing support of
specifying a reset GPIO for USB devices in a generic way. As we don't
have a solution for this at the moment, at least fix the current
workaround.

Fixes: 8668d8b2e67f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards")
Cc: stable@vger.kernel.org
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
Changes in v2:
  * Fix the commit ref in the Fixes tag
  * Improve commit message
  * Remove useless change of uncontrolled reg_vdd_5v
---
 arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
index 5f6fc4c2c529..a192a047f264 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
@@ -70,7 +70,9 @@  reg_rst_eth2: regulator-rst-eth2 {
 		regulator-name = "rst-usb-eth2";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb_eth2>;
-		gpio = <&gpio3 2 GPIO_ACTIVE_LOW>;
+		gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
 	};
 
 	reg_vdd_5v: regulator-5v {