diff mbox series

[devicetree,3/3] arm64: dts: lx2160abluebox3: update RGMII delays for sja1105 switch

Message ID 20211020113613.815210-4-vladimir.oltean@nxp.com (mailing list archive)
State New, archived
Headers show
Series Update SJA1105 switch RGMII delay bindings | expand

Commit Message

Vladimir Oltean Oct. 20, 2021, 11:36 a.m. UTC 
In the new behavior, the sja1105 driver expects there to be explicit
RGMII delays present on the fixed-link ports, otherwise it will complain
that it falls back to legacy behavior, which is to apply RGMII delays
incorrectly derived from the phy-mode string.

In this case, the legacy behavior of the driver is to apply both RX and
TX delays. To preserve that, add explicit 2 nanosecond delays, which are
identical with what the driver used to add (a 90 degree phase shift).
The delays from the phy-mode are ignored by new kernels (it's still
RGMII as long as it's "rgmii*" something), and the explicit
{rx,tx}-internal-delay-ps properties are ignored by old kernels, so the
change works both ways.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts
index b21be03da0af..042c486bdda2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts
@@ -386,6 +386,8 @@  port@2 {
 				reg = <2>;
 				ethernet = <&dpmac17>;
 				phy-mode = "rgmii-id";
+				rx-internal-delay-ps = <2000>;
+				tx-internal-delay-ps = <2000>;
 
 				fixed-link {
 					speed = <1000>;
@@ -529,6 +531,8 @@  port@2 {
 				reg = <2>;
 				ethernet = <&dpmac18>;
 				phy-mode = "rgmii-id";
+				rx-internal-delay-ps = <2000>;
+				tx-internal-delay-ps = <2000>;
 
 				fixed-link {
 					speed = <1000>;