diff mbox series

[v2,4/4] ARM: dts: imx7d: remarkable2: Enable the cyttsp5

Message ID 20211103114830.62711-5-alistair@alistair23.me (mailing list archive)
State New, archived
Headers show
Series Add support for the Cypress cyttsp5 | expand

Commit Message

Alistair Francis Nov. 3, 2021, 11:48 a.m. UTC 
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
 arch/arm/boot/dts/imx7d-remarkable2.dts | 89 +++++++++++++++++++++++++
 1 file changed, 89 insertions(+)

Comments

Dmitry Torokhov Nov. 6, 2021, 2:25 a.m. UTC | #1 
On Wed, Nov 03, 2021 at 09:48:30PM +1000, Alistair Francis wrote:
> +	tsc@24 {
> +		compatible = "cypress,tt21000";
> +		reg = <0x24>;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_touch>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
> +		reset-gpios = <&gpio1 13 0>;

Reset lines are almost universally active low. Are you sure it is active
high in your case?

Thanks.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index 89cbf13097a4..cb5c63963a3c 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -8,6 +8,7 @@ 
 /dts-v1/;
 
 #include "imx7d.dtsi"
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	model = "reMarkable 2.0";
@@ -34,6 +35,18 @@  reg_brcm: regulator-brcm {
 		startup-delay-us = <150>;
 	};
 
+	reg_touch: regulator-touch {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_TOUCH";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pinctrl_touch_reg>;
+		pinctrl-1 = <&pinctrl_touch_reg>;
+		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
@@ -51,6 +64,59 @@  &clks {
 	assigned-clock-rates = <0>, <32768>;
 };
 
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	tsc@24 {
+		compatible = "cypress,tt21000";
+		reg = <0x24>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio1 13 0>;
+		vdd-supply = <&reg_touch>;
+		touchscreen-size-x = <880>;
+		touchscreen-size-y = <1280>;
+
+		button@0 {
+			linux,code = <KEY_HOMEPAGE>;
+		};
+
+		button@1 {
+			linux,code = <KEY_MENU>;
+		};
+
+		button@2 {
+			linux,code = <KEY_BACK>;
+		};
+
+		button@3 {
+			linux,code = <KEY_SEARCH>;
+		};
+
+		button@4 {
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button@5 {
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		button@6 {
+			linux,code = <KEY_CAMERA>;
+		};
+
+		button@7 {
+			linux,code = <KEY_POWER>;
+		};
+	};
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -125,6 +191,29 @@  MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x14
 		>;
 	};
 
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			/* CYTTSP interrupt */
+			MX7D_PAD_GPIO1_IO14__GPIO1_IO14		0x54
+			/* CYTTSP reset */
+			MX7D_PAD_GPIO1_IO13__GPIO1_IO13		0x04
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
+			MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_touch_reg: touchreggrp {
+		fsl,pins = <
+			/* TOUCH_PWR_EN */
+			MX7D_PAD_GPIO1_IO11__GPIO1_IO11		0x14
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79