| Message ID | 20211105032910.446492-1-osk@google.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v3] ARM: dts: aspeed: tyan-s7106: Update nct7802 config | expand |
On Fri, 5 Nov 2021 at 03:29, Oskar Senft <osk@google.com> wrote: > > This change updates the configuration for the nct7802 hardware > monitor to correctly configure its temperature sensors. > > Signed-off-by: Oskar Senft <osk@google.com> Thanks, applied. > --- > Changes from PATCH v2: > - Add missing address-cells, size-cells configuration. > - Add missing new line between channel 0 and 1. > > Changes from PATCH v1: > - Removed superfluous "status" from channels. > --- > arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts | 24 +++++++++++++++++++++ > 1 file changed, 24 insertions(+) > > diff --git a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts > index 68f332ee1886..60ac6d3f03b5 100644 > --- a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts > +++ b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts > @@ -213,6 +213,30 @@ &i2c0 { > nct7802@28 { > compatible = "nuvoton,nct7802"; > reg = <0x28>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + channel@0 { /* LTD */ > + reg = <0>; > + }; > + > + channel@1 { /* RTD1 */ > + reg = <1>; > + sensor-type = "temperature"; > + temperature-mode = "thermistor"; > + }; > + > + channel@2 { /* RTD2 */ > + reg = <2>; > + sensor-type = "temperature"; > + temperature-mode = "thermistor"; > + }; > + > + channel@3 { /* RTD3 */ > + reg = <3>; > + sensor-type = "temperature"; > + }; > }; > > /* Also connected to: > -- > 2.34.0.rc0.344.g81b53c2807-goog >
diff --git a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts index 68f332ee1886..60ac6d3f03b5 100644 --- a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts +++ b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts @@ -213,6 +213,30 @@ &i2c0 { nct7802@28 { compatible = "nuvoton,nct7802"; reg = <0x28>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { /* LTD */ + reg = <0>; + }; + + channel@1 { /* RTD1 */ + reg = <1>; + sensor-type = "temperature"; + temperature-mode = "thermistor"; + }; + + channel@2 { /* RTD2 */ + reg = <2>; + sensor-type = "temperature"; + temperature-mode = "thermistor"; + }; + + channel@3 { /* RTD3 */ + reg = <3>; + sensor-type = "temperature"; + }; }; /* Also connected to:
This change updates the configuration for the nct7802 hardware monitor to correctly configure its temperature sensors. Signed-off-by: Oskar Senft <osk@google.com> --- Changes from PATCH v2: - Add missing address-cells, size-cells configuration. - Add missing new line between channel 0 and 1. Changes from PATCH v1: - Removed superfluous "status" from channels. --- arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts | 24 +++++++++++++++++++++ 1 file changed, 24 insertions(+)