[v2,7/7] arm64: dts: freescale: add initial tree for TQMa8Mx with i.MX8M

Message ID	20211105153025.187106-8-alexander.stein@ew.tq-group.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <SRS0=NKgK=PY=lists.infradead.org=linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@kernel.org> DMARC-Filter: OpenDMARC Filter v1.4.1 mail.kernel.org 3BDCE61245 From: Alexander Stein <alexander.stein@ew.tq-group.com> To: Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org> Cc: Alexander Stein <alexander.stein@ew.tq-group.com>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 7/7] arm64: dts: freescale: add initial tree for TQMa8Mx with i.MX8M Date: Fri, 5 Nov 2021 16:30:25 +0100 Message-Id: <20211105153025.187106-8-alexander.stein@ew.tq-group.com> In-Reply-To: <20211105153025.187106-1-alexander.stein@ew.tq-group.com> References: <20211105153025.187106-1-alexander.stein@ew.tq-group.com> MIME-Version: 1.0 Precedence: list Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org
Series	Support for some TQMa8M* boards \| expand [v2,0/7] Support for some TQMa8M* boards [v2,1/7] dt-bindings: arm: fsl: add TQMa8MxML boards [v2,2/7] arm64: dts: freescale: add initial tree for TQMa8MQML with i.MX8MM [v2,3/7] arm64: defconfig: enable drivers for TQ TQMa8MxML-MBa8Mx [v2,4/7] dt-bindings: arm: fsl: add TQMa8MxNL boards [v2,5/7] arm64: dts: freescale: add initial tree for TQMa8MQNL with i.MX8MN [v2,6/7] dt-bindings: arm: fsl: add TQMa8Mx boards [v2,7/7] arm64: dts: freescale: add initial tree for TQMa8Mx with i.MX8M

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index fa9499237e1e..db24ba3e3c6b 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -62,6 +62,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r4.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mq-tqma8mq-mba8mx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-mnt-reform2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-phanbell.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts new file mode 100644 index 000000000000..9965d3a09395 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts @@ -0,0 +1,412 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2019-2021 TQ-Systems GmbH + */ + +/dts-v1/; + +#include "imx8mq-tqma8mq.dtsi" +#include "mba8mx.dtsi" + +/ { + model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ on MBa8Mx"; + compatible = "tq,imx8mq-tqma8mq-mba8mx", "tq,imx8mq-tqma8mq", "fsl,imx8mq"; + + aliases { + eeprom0 = &eeprom3; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + rtc0 = &pcf85063; + rtc1 = &snvs_rtc; + }; + + extcon_usbotg: extcon-usbotg0 { + compatible = "linux,extcon-usb-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbcon0>; + id-gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>; + }; + + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + pcie1_refclk: pcie1-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + reg_otg_vbus: regulator-otg-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_regotgvbus>; + regulator-name = "MBA8MQ_OTG_VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usdhc2_vmmc: regulator-vmmc { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&btn2 { + gpios = <&gpio3 17 GPIO_ACTIVE_LOW>; +}; + +&audio_codec { + clock-names = "mclk"; + clocks = <&clk IMX8MQ_CLK_SAI3_ROOT>; +}; + +&i2c1 { + expander2: gpio@25 { + compatible = "nxp,pca9555"; + reg = <0x25>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <&reg_vcc_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_expander>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + mpcie-rst-hog { + gpio-hog; + gpios = <13 0>; + output-high; + line-name = "MPCIE_RST#"; + }; + }; +}; + +&irqsteer { + status = "okay"; +}; + +&gpio_leds { + led3 { + label = "led3"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; +}; + +&led2 { + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; +}; + +&pcie0 { + reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>, + <&clk IMX8MQ_CLK_PCIE1_AUX>, + <&clk IMX8MQ_CLK_PCIE1_PHY>, + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + epdev_on-supply = <&reg_vcc_3v3>; + hard-wired = <1>; + status = "okay"; +}; + +/* + * miniPCIe, also usable for cards with USB. Therefore configure the reset as + * static gpio hog. + */ +&pcie1 { + clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, + <&clk IMX8MQ_CLK_PCIE2_AUX>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&pcie1_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + epdev_on-supply = <&reg_vcc_3v3>; + hard-wired = <1>; + status = "okay"; +}; + +&sai3 { + assigned-clocks = <&clk IMX8MQ_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k"; + clocks = <&clk IMX8MQ_CLK_SAI3_IPG>, <&clk IMX8MQ_CLK_DUMMY>, + <&clk IMX8MQ_CLK_SAI3_ROOT>, <&clk IMX8MQ_CLK_DUMMY>, + <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_AUDIO_PLL1_OUT>, + <&clk IMX8MQ_AUDIO_PLL2_OUT>; +}; + +&uart1 { + assigned-clocks = <&clk IMX8MQ_CLK_UART1>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>; +}; + +&uart2 { + assigned-clocks = <&clk IMX8MQ_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>; +}; + +/* console */ +&uart3 { + assigned-clocks = <&clk IMX8MQ_CLK_UART3>; + assigned-clock-parents = <&clk IMX8MQ_CLK_25M>; +}; + +&usb3_phy0 { + vbus-supply = <&reg_otg_vbus>; + status = "okay"; +}; + +&usb_dwc3_0 { + /* we implement dual role but not full featured OTG */ + extcon = <&extcon_usbotg>; + hnp-disable; + srp-disable; + adp-disable; + /* + * TODO: OC not supported due to non matching active polarity + * pinctrl-names = "default"; + * pinctrl-0 = <&pinctrl_usb0>; + */ + disable-over-current; + dr_mode = "otg"; + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&usb_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x0000004e + MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x0000004e + MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x0000004e + MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x0000004e + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x0000004e + MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x0000004e + MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x0000004e + MX8MQ_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x0000004e + >; + }; + + pinctrl_expander: expandergrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0xd6 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23 + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + >; + }; + + pinctrl_gpiobutton: gpiobuttongrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x41 + MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x41 + MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17 0x41 + >; + }; + + pinctrl_gpioled: gpioledgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x41 + MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x41 + MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16 0x41 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000067 + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000067 + >; + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX8MQ_IOMUXC_I2C2_SCL_GPIO5_IO16 0x40000067 + MX8MQ_IOMUXC_I2C2_SDA_GPIO5_IO17 0x40000067 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000067 + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x40000067 + >; + }; + + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = < + MX8MQ_IOMUXC_I2C3_SCL_GPIO5_IO18 0x40000067 + MX8MQ_IOMUXC_I2C3_SDA_GPIO5_IO19 0x40000067 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO14_PWM3_OUT 0x16 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO15_PWM4_OUT 0x16 + >; + }; + + pinctrl_regotgvbus: reggotgvbusgrp { + fsl,pins = < + /* USB1 OTG PWR as GPIO */ + MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x06 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0xc1 + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MQ_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 + MX8MQ_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0xd6 + MX8MQ_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC 0xd6 + MX8MQ_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6 + MX8MQ_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + MX8MQ_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + MX8MQ_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x79 + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x79 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x79 + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x79 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x79 + MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x79 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MQ_IOMUXC_UART4_RXD_UART4_DCE_RX 0x79 + MX8MQ_IOMUXC_UART4_TXD_UART4_DCE_TX 0x79 + >; + }; + + /* + * TODO: OC detection is not functional yet since signal is expected to + * be low active. HW on MBa8Mx has high active signalling + * See: https://community.nxp.com/message/1247228?commentID=1247228#comment-1247228 + */ + pinctrl_usb0: usb0grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x01 + >; + }; + + pinctrl_usbcon0: usb0congrp { + fsl,pins = < + /* ID: floating / high: device, low: host -> use PU */ + MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10 0xe6 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2_100mhzgrp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc5 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc5 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc5 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc5 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2_200mhzgrp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc7 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc7 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc7 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc7 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2_gpiogrp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi new file mode 100644 index 000000000000..0a273110257e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi @@ -0,0 +1,378 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2019-2021 TQ-Systems GmbH + */ + +#include "imx8mq.dtsi" + +/ { + model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ"; + compatible = "tq,imx8mq-tqma8mq", "fsl,imx8mq"; + + memory@40000000 { + device_type = "memory"; + /* our minimum RAM config will be 1024 MiB */ + reg = <0x00000000 0x40000000 0 0x40000000>; + }; + + /* e-MMC IO, needed for HS modes */ + reg_vcc1v8: regulator-vcc1v8 { + compatible = "regulator-fixed"; + regulator-name = "TQMA8MX_VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_vcc3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "TQMA8MX_VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_vdd_arm: regulator-vdd-arm { + compatible = "regulator-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dvfs>; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1000000>; + regulator-name = "TQMa8Mx_DVFS"; + regulator-type = "voltage"; + regulator-settling-time-us = <150000>; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + states = <900000 0x1 1000000 0x0>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + /* 640 MiB */ + size = <0 0x28000000>; + /* 1024 - 128 MiB, our minimum RAM config will be 1024 MiB */ + alloc-ranges = <0 0x40000000 0 0x78000000>; + linux,cma-default; + }; + }; +}; + +&A53_0 { + cpu-supply = <&reg_vdd_arm>; +}; + +&A53_1 { + cpu-supply = <&reg_vdd_arm>; +}; + +&A53_2 { + cpu-supply = <&reg_vdd_arm>; +}; + +&A53_3 { + cpu-supply = <&reg_vdd_arm>; +}; + +&gpu { + status = "okay"; +}; + +&pgc_gpu { + power-supply = <&sw1a_reg>; +}; + +&pgc_vpu { + power-supply = <&sw1c_reg>; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pfuze100: pmic@8 { + compatible = "fsl,pfuze100"; + fsl,pfuze-support-disable-sw; + reg = <0x8>; + + regulators { + /* VDD_GPU */ + sw1a_reg: sw1ab { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + }; + + /* VDD_VPU */ + sw1c_reg: sw1c { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + }; + + /* NVCC_DRAM */ + sw2_reg: sw2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + /* VDD_DRAM */ + sw3a_reg: sw3ab { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + /* 1.8 V for QSPI NOR, e-MMC IO, must not be changed */ + nvcc_1v8_reg: sw4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-always-on; + }; + + /* not used */ + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + /* VDD_PHY_0V9 */ + vgen2_reg: vgen2 { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <975000>; + regulator-always-on; + }; + + /* VDD_PHY_1V8 */ + vgen3_reg: vgen3 { + regulator-min-microvolt = <1675000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + /* VDDA_1V8 */ + vgen4_reg: vgen4 { + regulator-min-microvolt = <1625000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + /* VDD_PHY_3V3 */ + vgen5_reg: vgen5 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3625000>; + regulator-always-on; + }; + + /* not used */ + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + sensor0: temperature-sensor-eeprom@1b { + compatible = "nxp,se97", "jedec,jc-42.4-temp"; + reg = <0x1b>; + }; + + pcf85063: rtc@51 { + compatible = "nxp,pcf85063a"; + reg = <0x51>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupt-names = "irq"; + interrupt-parent = <&gpio1>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + quartz-load-femtofarads = <7000>; + + clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + eeprom1: eeprom@53 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + read-only; + }; + + eeprom0: eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <32>; + }; +}; + +&pcie0 { + /* 3.3V supply, only way to switch on internal 1.8V supply using GPR */ + vph-supply = <&vgen5_reg>; +}; + +&pcie1 { + /* 3.3V supply, only way to switch on internal 1.8V supply using GPR */ + vph-supply = <&vgen5_reg>; +}; + +&qspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + assigned-clocks = <&clk IMX8MQ_CLK_QSPI>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>; + status = "okay"; + + flash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <84000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + vmmc-supply = <&reg_vcc3v3>; + vqmmc-supply = <&reg_vcc1v8>; + status = "okay"; +}; + +&vpu { + status = "okay"; +}; + +/* Attention: wdog reset forcing POR needs baseboard support */ +&wdog1 { + status = "okay"; +}; + +&iomuxc { + pinctrl_dvfs: dvfsgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x16 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f + >; + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_GPIO5_IO14 0x40000074 + MX8MQ_IOMUXC_I2C1_SDA_GPIO5_IO15 0x40000074 + >; + }; + + pinctrl_qspi: qspigrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x97 + MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 + MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x97 + MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x97 + MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x97 + MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x97 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x41 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1_100mhzgrp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x85 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc5 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc5 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc5 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc5 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc5 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc5 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc5 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc5 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc5 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x85 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1_200mhzgrp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x87 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc7 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc7 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc7 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc7 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc7 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc7 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc7 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc7 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc7 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x87 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +};

[v2,7/7] arm64: dts: freescale: add initial tree for TQMa8Mx with i.MX8M

Commit Message

Patch