| Message ID | 20211110122948.188683-6-alistair@alistair23.me (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add support for the silergy,sy7636a | expand |
On Wed, Nov 10, 2021 at 10:29:45PM +1000, Alistair Francis wrote: > This is a multi-function device to interface with the sy7636a > EPD PMIC chip from Silergy. > > Signed-off-by: Alistair Francis <alistair@alistair23.me> > --- > Documentation/hwmon/index.rst | 1 + > Documentation/hwmon/sy7636a-hwmon.rst | 24 ++++++ > drivers/hwmon/Kconfig | 9 +++ > drivers/hwmon/Makefile | 1 + > drivers/hwmon/sy7636a-hwmon.c | 108 ++++++++++++++++++++++++++ > 5 files changed, 143 insertions(+) > create mode 100644 Documentation/hwmon/sy7636a-hwmon.rst > create mode 100644 drivers/hwmon/sy7636a-hwmon.c > > diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst > index 7046bf1870d9..a887308850cd 100644 > --- a/Documentation/hwmon/index.rst > +++ b/Documentation/hwmon/index.rst > @@ -180,6 +180,7 @@ Hardware Monitoring Kernel Drivers > smsc47m1 > sparx5-temp > stpddc60 > + sy7636a-hwmon > tc654 > tc74 > thmc50 > diff --git a/Documentation/hwmon/sy7636a-hwmon.rst b/Documentation/hwmon/sy7636a-hwmon.rst > new file mode 100644 > index 000000000000..6b3e36d028dd > --- /dev/null > +++ b/Documentation/hwmon/sy7636a-hwmon.rst > @@ -0,0 +1,24 @@ > +Kernel driver sy7636a-hwmon > +========================= > + > +Supported chips: > + > + * Silergy SY7636A PMIC > + > + > +Description > +----------- > + > +This driver adds hardware temperature reading support for > +the Silergy SY7636A PMIC. > + > +The following sensors are supported > + > + * Temperature > + - SoC on-die temperature in milli-degree C > + > +sysfs-Interface > +--------------- > + > +temp0_input > + - SoC on-die temperature (milli-degree C) > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > index 64bd3dfba2c4..3139a286c35a 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -1662,6 +1662,15 @@ config SENSORS_SIS5595 > This driver can also be built as a module. If so, the module > will be called sis5595. > > +config SENSORS_SY7636A > + tristate "Silergy SY7636A" > + help > + If you say yes here you get support for the thermistor readout of > + the Silergy SY7636A PMIC. > + > + This driver can also be built as a module. If so, the module > + will be called sy7636a-hwmon. > + > config SENSORS_DME1737 > tristate "SMSC DME1737, SCH311x and compatibles" > depends on I2C && !PPC > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile > index baee6a8d4dd1..8f8da52098d1 100644 > --- a/drivers/hwmon/Makefile > +++ b/drivers/hwmon/Makefile > @@ -182,6 +182,7 @@ obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o > obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o > obj-$(CONFIG_SENSORS_SPARX5) += sparx5-temp.o > obj-$(CONFIG_SENSORS_STTS751) += stts751.o > +obj-$(CONFIG_SENSORS_SY7636A) += sy7636a-hwmon.o > obj-$(CONFIG_SENSORS_AMC6821) += amc6821.o > obj-$(CONFIG_SENSORS_TC74) += tc74.o > obj-$(CONFIG_SENSORS_THMC50) += thmc50.o > diff --git a/drivers/hwmon/sy7636a-hwmon.c b/drivers/hwmon/sy7636a-hwmon.c > new file mode 100644 > index 000000000000..84ceaae3a404 > --- /dev/null > +++ b/drivers/hwmon/sy7636a-hwmon.c > @@ -0,0 +1,108 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Functions to access SY3686A power management chip temperature > + * > + * Copyright (C) 2021 reMarkable AS - http://www.remarkable.com/ > + * > + * Authors: Lars Ivar Miljeteig <lars.ivar.miljeteig@remarkable.com> > + * Alistair Francis <alistair@alistair23.me> > + */ > + > +#include <linux/err.h> > +#include <linux/hwmon.h> > +#include <linux/init.h> > +#include <linux/module.h> > +#include <linux/platform_device.h> > +#include <linux/regmap.h> > +#include <linux/regulator/machine.h> > + > +#include <linux/mfd/sy7636a.h> > + > +static int sy7636a_read(struct device *dev, enum hwmon_sensor_types type, > + u32 attr, int channel, long *temp) > +{ > + struct regmap *regmap = dev_get_drvdata(dev); > + int ret, reg_val; > + > + ret = regmap_read(regmap, > + SY7636A_REG_TERMISTOR_READOUT, ®_val); > + if (ret) > + return ret; > + > + *temp = reg_val * 1000; > + > + return 0; > +} > + > +static umode_t sy7636a_is_visible(const void *data, > + enum hwmon_sensor_types type, > + u32 attr, int channel) > +{ > + if (type != hwmon_temp) > + return 0; > + > + if (attr != hwmon_temp_input) > + return 0; > + > + return 0444; > +} > + > +static const struct hwmon_ops sy7636a_hwmon_ops = { > + .is_visible = sy7636a_is_visible, > + .read = sy7636a_read, > +}; > + > +static const struct hwmon_channel_info *sy7636a_info[] = { > + HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ), > + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT), > + NULL > +}; > + > +static const struct hwmon_chip_info sy7636a_chip_info = { > + .ops = &sy7636a_hwmon_ops, > + .info = sy7636a_info, > +}; > + > +static int sy7636a_sensor_probe(struct platform_device *pdev) > +{ > + struct regmap *regmap = dev_get_regmap(pdev->dev.parent, NULL); > + struct regulator *regulator; > + struct device *hwmon_dev; > + int err; > + > + if (!regmap) > + return -EPROBE_DEFER; > + > + regulator = devm_regulator_get(&pdev->dev, "vcom"); > + if (IS_ERR(regulator)) { > + return PTR_ERR(regulator); > + } > + > + err = regulator_enable(regulator); > + if (err) { > + regulator_put(regulator); Is this needed ? I would have assumed that the devm_ function above would ensure that the put is handled automatically. Guenter > + return err; > + } > + > + hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev, > + "sy7636a_temperature", regmap, &sy7636a_chip_info, NULL); > + > + if (IS_ERR(hwmon_dev)) { > + err = PTR_ERR(hwmon_dev); > + dev_err(&pdev->dev, "Unable to register hwmon device, returned %d\n", err); > + return err; > + } > + > + return 0; > +} > + > +static struct platform_driver sy7636a_sensor_driver = { > + .probe = sy7636a_sensor_probe, > + .driver = { > + .name = "sy7636a-temperature", > + }, > +}; > +module_platform_driver(sy7636a_sensor_driver); > + > +MODULE_DESCRIPTION("SY7636A sensor driver"); > +MODULE_LICENSE("GPL"); > -- > 2.31.1 >
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 7046bf1870d9..a887308850cd 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -180,6 +180,7 @@ Hardware Monitoring Kernel Drivers smsc47m1 sparx5-temp stpddc60 + sy7636a-hwmon tc654 tc74 thmc50 diff --git a/Documentation/hwmon/sy7636a-hwmon.rst b/Documentation/hwmon/sy7636a-hwmon.rst new file mode 100644 index 000000000000..6b3e36d028dd --- /dev/null +++ b/Documentation/hwmon/sy7636a-hwmon.rst @@ -0,0 +1,24 @@ +Kernel driver sy7636a-hwmon +========================= + +Supported chips: + + * Silergy SY7636A PMIC + + +Description +----------- + +This driver adds hardware temperature reading support for +the Silergy SY7636A PMIC. + +The following sensors are supported + + * Temperature + - SoC on-die temperature in milli-degree C + +sysfs-Interface +--------------- + +temp0_input + - SoC on-die temperature (milli-degree C) diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 64bd3dfba2c4..3139a286c35a 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1662,6 +1662,15 @@ config SENSORS_SIS5595 This driver can also be built as a module. If so, the module will be called sis5595. +config SENSORS_SY7636A + tristate "Silergy SY7636A" + help + If you say yes here you get support for the thermistor readout of + the Silergy SY7636A PMIC. + + This driver can also be built as a module. If so, the module + will be called sy7636a-hwmon. + config SENSORS_DME1737 tristate "SMSC DME1737, SCH311x and compatibles" depends on I2C && !PPC diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index baee6a8d4dd1..8f8da52098d1 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -182,6 +182,7 @@ obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o obj-$(CONFIG_SENSORS_SPARX5) += sparx5-temp.o obj-$(CONFIG_SENSORS_STTS751) += stts751.o +obj-$(CONFIG_SENSORS_SY7636A) += sy7636a-hwmon.o obj-$(CONFIG_SENSORS_AMC6821) += amc6821.o obj-$(CONFIG_SENSORS_TC74) += tc74.o obj-$(CONFIG_SENSORS_THMC50) += thmc50.o diff --git a/drivers/hwmon/sy7636a-hwmon.c b/drivers/hwmon/sy7636a-hwmon.c new file mode 100644 index 000000000000..84ceaae3a404 --- /dev/null +++ b/drivers/hwmon/sy7636a-hwmon.c @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Functions to access SY3686A power management chip temperature + * + * Copyright (C) 2021 reMarkable AS - http://www.remarkable.com/ + * + * Authors: Lars Ivar Miljeteig <lars.ivar.miljeteig@remarkable.com> + * Alistair Francis <alistair@alistair23.me> + */ + +#include <linux/err.h> +#include <linux/hwmon.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/machine.h> + +#include <linux/mfd/sy7636a.h> + +static int sy7636a_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *temp) +{ + struct regmap *regmap = dev_get_drvdata(dev); + int ret, reg_val; + + ret = regmap_read(regmap, + SY7636A_REG_TERMISTOR_READOUT, ®_val); + if (ret) + return ret; + + *temp = reg_val * 1000; + + return 0; +} + +static umode_t sy7636a_is_visible(const void *data, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + if (type != hwmon_temp) + return 0; + + if (attr != hwmon_temp_input) + return 0; + + return 0444; +} + +static const struct hwmon_ops sy7636a_hwmon_ops = { + .is_visible = sy7636a_is_visible, + .read = sy7636a_read, +}; + +static const struct hwmon_channel_info *sy7636a_info[] = { + HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ), + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT), + NULL +}; + +static const struct hwmon_chip_info sy7636a_chip_info = { + .ops = &sy7636a_hwmon_ops, + .info = sy7636a_info, +}; + +static int sy7636a_sensor_probe(struct platform_device *pdev) +{ + struct regmap *regmap = dev_get_regmap(pdev->dev.parent, NULL); + struct regulator *regulator; + struct device *hwmon_dev; + int err; + + if (!regmap) + return -EPROBE_DEFER; + + regulator = devm_regulator_get(&pdev->dev, "vcom"); + if (IS_ERR(regulator)) { + return PTR_ERR(regulator); + } + + err = regulator_enable(regulator); + if (err) { + regulator_put(regulator); + return err; + } + + hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev, + "sy7636a_temperature", regmap, &sy7636a_chip_info, NULL); + + if (IS_ERR(hwmon_dev)) { + err = PTR_ERR(hwmon_dev); + dev_err(&pdev->dev, "Unable to register hwmon device, returned %d\n", err); + return err; + } + + return 0; +} + +static struct platform_driver sy7636a_sensor_driver = { + .probe = sy7636a_sensor_probe, + .driver = { + .name = "sy7636a-temperature", + }, +}; +module_platform_driver(sy7636a_sensor_driver); + +MODULE_DESCRIPTION("SY7636A sensor driver"); +MODULE_LICENSE("GPL");
This is a multi-function device to interface with the sy7636a EPD PMIC chip from Silergy. Signed-off-by: Alistair Francis <alistair@alistair23.me> --- Documentation/hwmon/index.rst | 1 + Documentation/hwmon/sy7636a-hwmon.rst | 24 ++++++ drivers/hwmon/Kconfig | 9 +++ drivers/hwmon/Makefile | 1 + drivers/hwmon/sy7636a-hwmon.c | 108 ++++++++++++++++++++++++++ 5 files changed, 143 insertions(+) create mode 100644 Documentation/hwmon/sy7636a-hwmon.rst create mode 100644 drivers/hwmon/sy7636a-hwmon.c