[v2,3/3] ARM: dts: add JOZ Access Point

Message ID	20211122101917.1643563-3-o.rempel@pengutronix.de (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org> From: Oleksij Rempel <o.rempel@pengutronix.de> To: Rob Herring <robh+dt@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Shawn Guo <shawnguo@kernel.org> Cc: Oleksij Rempel <o.rempel@pengutronix.de>, devicetree@vger.kernel.org, Fabio Estevam <festevam@gmail.com>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, NXP Linux Team <linux-imx@nxp.com>, Pengutronix Kernel Team <kernel@pengutronix.de>, David Jander <david@protonic.nl> Subject: [PATCH v2 3/3] ARM: dts: add JOZ Access Point Date: Mon, 22 Nov 2021 11:19:17 +0100 Message-Id: <20211122101917.1643563-3-o.rempel@pengutronix.de> In-Reply-To: <20211122101917.1643563-1-o.rempel@pengutronix.de> References: <20211122101917.1643563-1-o.rempel@pengutronix.de> MIME-Version: 1.0 Precedence: list Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org
Series	[v2,1/3] dt-bindings: vendor-prefixes: Add an entry for JOZ BV \| expand [v2,1/3] dt-bindings: vendor-prefixes: Add an entry for JOZ BV [v2,2/3] dt-bindings: arm: fsl: add JOZ Access Point [v2,3/3] ARM: dts: add JOZ Access Point

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 0de64f237cd8..9753faf0f1aa 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -688,6 +688,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ull-colibri-emmc-eval-v3.dtb \ imx6ull-colibri-eval-v3.dtb \ imx6ull-colibri-wifi-eval-v3.dtb \ + imx6ull-jozacp.dtb \ imx6ull-myir-mys-6ulx-eval.dtb \ imx6ull-opos6uldev.dtb \ imx6ull-phytec-segin-ff-rdk-nand.dtb \ diff --git a/arch/arm/boot/dts/imx6ull-jozacp.dts b/arch/arm/boot/dts/imx6ull-jozacp.dts new file mode 100644 index 000000000000..a152eeb78e88 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-jozacp.dts @@ -0,0 +1,456 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2020 Protonic Holland + * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include "imx6ull.dtsi" + +/ { + model = "JOZ Access Point"; + compatible = "joz,jozacp", "fsl,imx6ull"; + + chosen { + stdout-path = &uart1; + }; + + /* On board name LED_RGB1 */ + led-controller-1 { + compatible = "pwm-leds"; + + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <0>; + pwms = <&pwm1 0 10000000 0>; + max-brightness = <255>; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + pwms = <&pwm3 0 10000000 0>; + max-brightness = <255>; + }; + + led-2 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + pwms = <&pwm5 0 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "heartbeat"; + }; + }; + + /* On board name LED_RGB2 */ + led-controller-2 { + compatible = "pwm-leds"; + + led-3 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + pwms = <&pwm2 0 10000000 0>; + max-brightness = <255>; + }; + + led-4 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <4>; + pwms = <&pwm4 0 10000000 0>; + max-brightness = <255>; + }; + + led-5 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <5>; + pwms = <&pwm6 0 10000000 0>; + max-brightness = <255>; + }; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&reg_5v0>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_vbus: regulator-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vbus>; + regulator-name = "vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&reg_5v0>; + gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_npd>; + reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + +&cpu0 { + clock-frequency = <792000000>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <&ethphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + interrupts-extended = <&gpio1 29 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&pwm5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm5>; + status = "okay"; +}; + +&pwm6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm6>; + status = "okay"; +}; + +&snvs_rtc { + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + dtr-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; + uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + vbus-supply = <&reg_vbus>; + dr_mode = "host"; + over-current-active-low; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + vmmc-supply = <&reg_3v3>; + bus-width = <8>; + no-1-8-v; + non-removable; + cap-mmc-hw-reset; + no-sd; + no-sdio; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + mmc-pwrseq = <&usdhc2_wifi_pwrseq>; + bus-width = <4>; + no-1-8-v; + no-mmc; + no-sd; + non-removable; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_can1: can1grp { + fsl,pins = < + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b0b0 + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + + MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x038b0 + MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x170b0 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* HW Revision */ + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x1b0b0 + MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x1b0b0 + + /* HW ID */ + MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x1b0b0 + + /* Digital inputs */ + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x11000 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x11000 + MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x11000 + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x11000 + MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x11000 + + /* Isolated outputs */ + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x01020 + MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21 0x01020 + MX6UL_PAD_UART2_RTS_B__GPIO1_IO23 0x01020 + MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x01020 + MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x01020 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001f8b1 + MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001f8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001f8b1 + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001f8b1 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__PWM1_OUT 0x01010 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA01__PWM2_OUT 0x01010 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA02__PWM3_OUT 0x01010 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA03__PWM4_OUT 0x01010 + >; + }; + + pinctrl_pwm5: pwm5grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA18__PWM5_OUT 0x01010 + >; + }; + + pinctrl_pwm6: pwm6grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA19__PWM6_OUT 0x01010 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x1b0b0 + MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX 0x1b0b0 + MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS 0x1b0b0 + MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS 0x1b0b0 + MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x1b0b0 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B 0x17099 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x1f099 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10099 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17099 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17099 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17099 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17099 + MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17099 + MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17099 + MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17099 + MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17099 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x100b9 + MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x170b9 + MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x170b9 + MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x170b9 + MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x170b9 + MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x170b9 + >; + }; + + pinctrl_vbus: vbus0grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x030b0 + >; + }; + + pinctrl_wifi_npd: wifigrp { + fsl,pins = < + /* WL_REG_ON */ + MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x03020 + >; + }; +}; + +&iomuxc_snvs { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_hog>; + + pinctrl_snvs_hog: snvs-hog-grp { + fsl,pins = < + /* Digital outputs */ + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x00020 + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x00020 + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x00020 + MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x00020 + MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x00020 + + /* Digital outputs fault feedback */ + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x17000 + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17000 + MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x17000 + MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x17000 + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x17000 + >; + }; +};

[v2,3/3] ARM: dts: add JOZ Access Point

Commit Message

Patch