diff mbox series

ARM: dts: BCM5301X: use non-deprecated USB 2.0 PHY binding

Message ID 20211123090333.11597-1-zajec5@gmail.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: BCM5301X: use non-deprecated USB 2.0 PHY binding | expand

Commit Message

Rafał Miłecki Nov. 23, 2021, 9:03 a.m. UTC 
From: Rafał Miłecki <rafal@milecki.pl>

The new binding covers a single reg and uses syscon to reference shared
register.

References: 55b9b741712d ("dt-bindings: phy: brcm,ns-usb2-phy: bind just a PHY block")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 arch/arm/boot/dts/bcm5301x.dtsi | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

Comments

Florian Fainelli Nov. 23, 2021, 11:58 p.m. UTC | #1 
On Tue, 23 Nov 2021 10:03:33 +0100, Rafał Miłecki <zajec5@gmail.com> wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> The new binding covers a single reg and uses syscon to reference shared
> register.
> 
> References: 55b9b741712d ("dt-bindings: phy: brcm,ns-usb2-phy: bind just a PHY block")
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index e1cffef4935a..588e57db6859 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -148,15 +148,6 @@  periph_clk: periph_clk {
 		};
 	};
 
-	usb2_phy: usb2-phy@1800c000 {
-		compatible = "brcm,ns-usb2-phy";
-		reg = <0x1800c000 0x1000>;
-		reg-names = "dmu";
-		#phy-cells = <0>;
-		clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
-		clock-names = "phy-ref-clk";
-	};
-
 	axi@18000000 {
 		compatible = "brcm,bus-axi";
 		reg = <0x18000000 0x1000>;
@@ -448,7 +439,16 @@  genpll: clock-controller@140 {
 						     "sata1", "sata2";
 			};
 
-			syscon@180 {
+			usb2_phy: phy@164 {
+				compatible = "brcm,ns-usb2-phy";
+				reg = <0x164 0x4>;
+				brcm,syscon-clkset = <&cru_clkset>;
+				clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+				clock-names = "phy-ref-clk";
+				#phy-cells = <0>;
+			};
+
+			cru_clkset: syscon@180 {
 				compatible = "brcm,cru-clkset", "syscon";
 				reg = <0x180 0x4>;
 			};