[v3,2/7] arm64: dts: freescale: add initial device tree for TQMa8MQML with i.MX8MM

Message ID	20211201072949.53947-3-alexander.stein@ew.tq-group.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org> From: Alexander Stein <alexander.stein@ew.tq-group.com> To: Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org> Cc: Alexander Stein <alexander.stein@ew.tq-group.com>, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 2/7] arm64: dts: freescale: add initial device tree for TQMa8MQML with i.MX8MM Date: Wed, 1 Dec 2021 08:29:43 +0100 Message-Id: <20211201072949.53947-3-alexander.stein@ew.tq-group.com> In-Reply-To: <20211201072949.53947-1-alexander.stein@ew.tq-group.com> References: <20211201072949.53947-1-alexander.stein@ew.tq-group.com> MIME-Version: 1.0 Precedence: list Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org
Series	Support for some TQMa8M* boards \| expand [v3,0/7] Support for some TQMa8M* boards [v3,1/7] dt-bindings: arm: fsl: add TQMa8MxML boards [v3,2/7] arm64: dts: freescale: add initial device tree for TQMa8MQML with i.MX8MM [v3,3/7] arm64: defconfig: enable drivers for TQ TQMa8MxML-MBa8Mx [v3,4/7] dt-bindings: arm: fsl: add TQMa8MxNL boards [v3,5/7] arm64: dts: freescale: add initial device tree for TQMa8MQNL with i.MX8MN [v3,6/7] dt-bindings: arm: fsl: add TQMa8Mx boards [v3,7/7] arm64: dts: freescale: add initial device tree for TQMa8Mx with i.MX8M

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index a14a6173b765..33c21322bf15 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -40,6 +40,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts new file mode 100644 index 000000000000..7844878788f4 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts @@ -0,0 +1,253 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2020-2021 TQ-Systems GmbH + */ + +/dts-v1/; + +#include "imx8mm-tqma8mqml.dtsi" +#include "mba8mx.dtsi" + +/ { + model = "TQ-Systems GmbH i.MX8MM TQMa8MxML on MBa8Mx"; + compatible = "tq,imx8mm-tqma8mqml-mba8mx", "tq,imx8mm-tqma8mqml", "fsl,imx8mm"; + + aliases { + eeprom0 = &eeprom3; + mmc0 = &usdhc3; + mmc1 = &usdhc2; + mmc2 = &usdhc1; + rtc0 = &pcf85063; + rtc1 = &snvs_rtc; + }; + + reg_usdhc2_vmmc: regulator-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100>; + off-on-delay-us = <12000>; + }; + + extcon_usbotg1: extcon-usbotg1 { + compatible = "linux,extcon-usb-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_extcon>; + id-gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c1 { + expander2: gpio@27 { + compatible = "nxp,pca9555"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <&reg_vcc_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_expander>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&sai3 { + assigned-clocks = <&clk IMX8MM_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k"; + clocks = <&clk IMX8MM_CLK_SAI3_IPG>, <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_SAI3_ROOT>, <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>, + <&clk IMX8MM_AUDIO_PLL2_OUT>; +}; + +&tlv320aic3x04 { + clock-names = "mclk"; + clocks = <&clk IMX8MM_CLK_SAI3_ROOT>; +}; + +&uart1 { + assigned-clocks = <&clk IMX8MM_CLK_UART1>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; +}; + +&uart2 { + assigned-clocks = <&clk IMX8MM_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + dr_mode = "otg"; + extcon = <&extcon_usbotg1>; + srp-disable; + hnp-disable; + adp-disable; + power-active-high; + over-current-active-low; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + vbus-supply = <&reg_hub_vbus>; + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = <MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x00000006>, + <MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x00000006>, + <MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x00000006>, + <MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x00000006>; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = <MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x00000006>, + <MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x00000006>, + <MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x00000006>, + <MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x00000006>; + }; + + pinctrl_expander: expandergrp { + fsl,pins = <MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x94>; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = <MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x40000002>, + <MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x40000002>, + <MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x14>, + <MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x14>, + <MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x14>, + <MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x14>, + <MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x90>, + <MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x90>, + <MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x90>, + <MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x90>, + <MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x14>, + <MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x90>, + <MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x90>, + <MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x14>; + }; + + pinctrl_gpiobutton: gpiobuttongrp { + fsl,pins = <MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x84>, + <MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x84>, + <MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0 0x84>; + }; + + pinctrl_gpioled: gpioledgrp { + fsl,pins = <MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x84>, + <MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14 0x84>; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = <MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000004>, + <MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000004>; + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = <MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16 0x40000004>, + <MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17 0x40000004>; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = <MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000004>, + <MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x40000004>; + }; + + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = <MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x40000004>, + <MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x40000004>; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = <MX8MM_IOMUXC_GPIO1_IO14_PWM3_OUT 0x14>; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = <MX8MM_IOMUXC_GPIO1_IO15_PWM4_OUT 0x14>; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = <MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0x94>, + <MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0x94>, + <MX8MM_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC 0x94>, + <MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0x94>, + <MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0x94>, + <MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0x94>, + <MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0x94>; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = <MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x16>, + <MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x16>; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = <MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x16>, + <MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x16>; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = <MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x16>, + <MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x16>; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = <MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x16>, + <MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x16>; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = <MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x84>, + <MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x84>; + }; + + pinctrl_usb1_extcon: usb1-extcongrp { + fsl,pins = <MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x1c0>; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpiogrp { + fsl,pins = <MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x84>; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x1d4>, + <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4>, + <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4>, + <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4>, + <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4>, + <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4>, + <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x84>; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x1d4>, + <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4>, + <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4>, + <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4>, + <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4>, + <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4>, + <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x84>; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x1d4>, + <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4>, + <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4>, + <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4>, + <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4>, + <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4>, + <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x84>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi new file mode 100644 index 000000000000..284e62acc0b4 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi @@ -0,0 +1,335 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2020-2021 TQ-Systems GmbH + */ + +#include "imx8mm.dtsi" + +/ { + model = "TQ-Systems GmbH i.MX8MM TQMa8MxML"; + compatible = "tq,imx8mm-tqma8mqml", "fsl,imx8mm"; + + memory@40000000 { + device_type = "memory"; + /* our minimum RAM config will be 1024 MiB */ + reg = <0x00000000 0x40000000 0 0x40000000>; + }; + + /* e-MMC IO, needed for HS modes */ + reg_vcc1v8: regulator-vcc1v8 { + compatible = "regulator-fixed"; + regulator-name = "TQMA8MXML_VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + /* identical to buck4_reg, but should never change */ + reg_vcc3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "TQMA8MXML_VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + /* 640 MiB */ + size = <0 0x28000000>; + /* 1024 - 128 MiB, our minimum RAM config will be 1024 MiB */ + alloc-ranges = <0 0x40000000 0 0x78000000>; + linux,cma-default; + }; + }; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; +}; + +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi>; + status = "okay"; + + flash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <84000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + }; +}; + +&gpu_2d { + status = "okay"; +}; + +&gpu_3d { + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + sensor0: temperature-sensor-eeprom@1b { + compatible = "nxp,se97", "jedec,jc-42.4-temp"; + reg = <0x1b>; + }; + + pca9450: pmic@25 { + compatible = "nxp,pca9450a"; + reg = <0x25>; + + /* PMIC PCA9450 PMIC_nINT GPIO1_IO08 */ + pinctrl-0 = <&pinctrl_pmic>; + pinctrl-names = "default"; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + + regulators { + /* V_0V85_SOC: 0.85 */ + buck1_reg: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + /* VDD_ARM */ + buck2_reg: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + regulator-ramp-delay = <3125>; + }; + + /* V_0V85_GPU / DRAM / VPU */ + buck3_reg: BUCK3 { + regulator-name = "BUCK3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + /* VCC3V3 -> VMMC, ... must not be changed */ + buck4_reg: BUCK4 { + regulator-name = "BUCK4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_1V8 -> VQMMC, SPI-NOR, ... must not be changed */ + buck5_reg: BUCK5 { + regulator-name = "BUCK5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_1V1 -> RAM, ... must not be changed */ + buck6_reg: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_1V8_SNVS */ + ldo1_reg: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_0V8_SNVS */ + ldo2_reg: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_1V8_ANA */ + ldo3_reg: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_0V9_MIPI */ + ldo4_reg: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VCC SD IO - switched using SD2 VSELECT */ + ldo5_reg: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + + pcf85063: rtc@51 { + compatible = "nxp,pcf85063a"; + reg = <0x51>; + quartz-load-femtofarads = <7000>; + }; + + eeprom1: eeprom@53 { + compatible = "nxp,se97b", "atmel,24c02"; + read-only; + reg = <0x53>; + pagesize = <16>; + }; + + eeprom0: eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <32>; + }; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + vmmc-supply = <&reg_vcc3v3>; + vqmmc-supply = <&reg_vcc1v8>; + status = "okay"; +}; + +/* + * Attention: + * wdog reset is routed to PMIC, PMIC must be preconfigured to force POR + * without LDO for SNVS. GPIO1_IO02 must not be used as GPIO. + */ +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_flexspi: flexspigrp { + fsl,pins = <MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82>, + <MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82>, + <MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82>, + <MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82>, + <MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82>, + <MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82>; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = <MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000004>, + <MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x40000004>; + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = <MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x40000004>, + <MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x40000004>; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = <MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x94>; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = <MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x84>; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x1d4>, + <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d2>, + <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4>, + <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4>, + <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4>, + <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4>, + <MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4>, + <MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4>, + <MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4>, + <MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4>, + <MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x84>, + /* option USDHC3_RESET_B not defined, only in RM */ + <MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x84>; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x1d2>, + <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d2>, + <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4>, + <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4>, + <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4>, + <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4>, + <MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4>, + <MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4>, + <MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4>, + <MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4>, + <MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x84>, + /* option USDHC3_RESET_B not defined, only in RM */ + <MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x84>; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x1d6>, + <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d2>, + <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4>, + <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4>, + <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4>, + <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4>, + <MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4>, + <MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4>, + <MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4>, + <MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4>, + <MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x84>, + /* option USDHC3_RESET_B not defined, only in RM */ + <MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x84>; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = <MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x84>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi new file mode 100644 index 000000000000..f27e3c8de916 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi @@ -0,0 +1,282 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2020-2021 TQ-Systems GmbH + */ + +#include <dt-bindings/net/ti-dp83867.h> + +/* TQ-Systems GmbH MBa8Mx baseboard */ + +/ { + beeper { + compatible = "pwm-beeper"; + pwms = <&pwm4 0 250000 0>; + beeper-hz = <4000>; + amp-supply = <&reg_vcc_3v3>; + }; + + chosen { + // bootargs = "console=ttymxc2,115200 earlycon=ec_imx6q,0x30880000,115200"; + stdout-path = &uart3; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiobutton>; + autorepeat; + + switch1 { + label = "switch1"; + linux,code = <BTN_0>; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + btn2: switch2 { + label = "switch2"; + linux,code = <BTN_1>; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + switch3 { + label = "switch3"; + linux,code = <BTN_2>; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; + + gpio_leds: gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpioled>; + + led1 { + label = "led1"; + gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led2: led2 { + label = "led2"; + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_hub_vbus: regulator-hub-vbus { + compatible = "regulator-fixed"; + regulator-name = "MBA8MX_HUB_VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_sn65dsi83_1v8: regulator-sn65dsi83-1v8 { + compatible = "regulator-fixed"; + regulator-name = "SN65DSI83_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&expander0 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vcc_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "MBA8MX_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + sound { + compatible = "fsl,imx-audio-tlv320aic32x4"; + model = "tqm-tlv320aic32"; + ssi-controller = <&sai3>; + audio-codec = <&tlv320aic3x04>; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <&ethphy0>; + phy-supply = <&reg_vcc_3v3>; + fsl,magic-packet; + mac-address = [ 00 00 00 00 00 00 ]; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@e { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0xe>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,dp83867-rxctrl-strap-quirk; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + enet-phy-lane-no-swap; + reset-gpios = <&expander2 7 GPIO_ACTIVE_LOW>; + reset-assert-us = <500000>; + reset-deassert-us = <500>; + }; + }; +}; + +&i2c1 { + expander0: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <&reg_vcc_3v3>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + sd-mux-oe-hog { + gpio-hog; + gpios = <8 0>; + output-low; + line-name = "SD_MUX_EN#"; + }; + + boot-cfg-oe-hog { + gpio-hog; + gpios = <12 0>; + output-high; + line-name = "BOOT_CFG_OE#"; + }; + + rst-usb-hub-hog { + gpio-hog; + gpios = <13 0>; + output-high; + line-name = "RST_USB_HUB#"; + }; + }; + + expander1: gpio@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <&reg_vcc_3v3>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + tlv320aic3x04: audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + reset-gpios = <&expander2 0 GPIO_ACTIVE_LOW>; + iov-supply = <&reg_vcc_3v3>; + ldoin-supply = <&reg_vcc_3v3>; + }; + + sensor1: sensor@1f { + compatible = "nxp,se97", "jedec,jc-42.4-temp"; + reg = <0x1f>; + }; + + eeprom3: eeprom@57 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x57>; + pagesize = <16>; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + #sound-dai-cells = <0>; + assigned-clock-rates = <49152000>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* console */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +/* UART4 is assigned to Cortex-M4 */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + bus-width = <4>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + disable-wp; + no-mmc; + no-sdio; + vmmc-supply = <&reg_usdhc2_vmmc>; + status = "okay"; +};

[v3,2/7] arm64: dts: freescale: add initial device tree for TQMa8MQML with i.MX8MM

Commit Message

Patch