| Message ID | 20211212134912.1988208-2-dev@lynxeye.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/3] arm64: dts: mnt-reform2: add internal display support | expand |
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts index b96825799f3d..b48648bf302f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts @@ -296,8 +296,8 @@ MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x1 pinctrl_i2c3: i2c3grp { fsl,pins = < - MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f - MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000022 + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x40000022 >; };
The slew rate and drive-strength of the i2c3 pads were much too high. Bring them down to avoid signal quality issues. Signed-off-by: Lucas Stach <dev@lynxeye.de> --- arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)