diff mbox series

[07/11] PCI: mvebu: Set PCI_BRIDGE_EMUL_NO_IO_FORWARD when IO is unsupported

Message ID 20211221141455.30011-8-pali@kernel.org (mailing list archive)
State New, archived
Headers show
Series PCI: Small improvements for pci-bridge-emul and mvebu | expand

Commit Message

Pali Rohár Dec. 21, 2021, 2:14 p.m. UTC
This will make PCI bridge to return zeros when accessing IO base and limit
registers, as required by PCIe base specification.

This allows to remove adhoc checks around mvebu_pcie_handle_iobase_change()
function for unsupported IO ranges. PCI_BRIDGE_EMUL_NO_IO_FORWARD ensures
that there will be no non-zeros write to IO registers when IO is not
supported.

Signed-off-by: Pali Rohár <pali@kernel.org>
---
 drivers/pci/controller/pci-mvebu.c | 29 ++++++++++-------------------
 1 file changed, 10 insertions(+), 19 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
index 016f709b3067..551f55af5226 100644
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -438,12 +438,6 @@  static int mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
 		return mvebu_pcie_set_window(port, port->io_target, port->io_attr,
 					     &desired, &port->iowin);
 
-	if (!mvebu_has_ioport(port)) {
-		dev_WARN(&port->pcie->pdev->dev,
-			 "Attempt to set IO when IO is disabled\n");
-		return -EOPNOTSUPP;
-	}
-
 	/*
 	 * We read the PCI-to-PCI bridge emulated registers, and
 	 * calculate the base address and size of the address decoding
@@ -599,24 +593,18 @@  mvebu_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,
 
 	switch (reg) {
 	case PCI_COMMAND:
-		if (!mvebu_has_ioport(port)) {
-			conf->command = cpu_to_le16(
-				le16_to_cpu(conf->command) & ~PCI_COMMAND_IO);
-			new &= ~PCI_COMMAND_IO;
-		}
-
 		mvebu_writel(port, new, PCIE_CMD_OFF);
 		break;
 
 	case PCI_IO_BASE:
-		if ((mask & 0xffff) && mvebu_pcie_handle_iobase_change(port)) {
+		if ((mask & 0xffff) && mvebu_has_ioport(port) &&
+		    mvebu_pcie_handle_iobase_change(port)) {
 			/* On error disable IO range */
 			conf->iobase &= ~0xf0;
 			conf->iolimit &= ~0xf0;
+			conf->iobase |= 0xf0;
 			conf->iobaseupper = cpu_to_le16(0x0000);
 			conf->iolimitupper = cpu_to_le16(0x0000);
-			if (mvebu_has_ioport(port))
-				conf->iobase |= 0xf0;
 		}
 		break;
 
@@ -630,14 +618,14 @@  mvebu_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,
 		break;
 
 	case PCI_IO_BASE_UPPER16:
-		if (mvebu_pcie_handle_iobase_change(port)) {
+		if (mvebu_has_ioport(port) &&
+		    mvebu_pcie_handle_iobase_change(port)) {
 			/* On error disable IO range */
 			conf->iobase &= ~0xf0;
 			conf->iolimit &= ~0xf0;
+			conf->iobase |= 0xf0;
 			conf->iobaseupper = cpu_to_le16(0x0000);
 			conf->iolimitupper = cpu_to_le16(0x0000);
-			if (mvebu_has_ioport(port))
-				conf->iobase |= 0xf0;
 		}
 		break;
 
@@ -722,6 +710,7 @@  static const struct pci_bridge_emul_ops mvebu_pci_bridge_emul_ops = {
  */
 static int mvebu_pci_bridge_emul_init(struct mvebu_pcie_port *port)
 {
+	unsigned int bridge_flags = PCI_BRIDGE_EMUL_NO_PREFMEM_FORWARD;
 	struct pci_bridge_emul *bridge = &port->bridge;
 	u32 pcie_cap = mvebu_readl(port, PCIE_CAP_PCIEXP);
 	u8 pcie_cap_ver = ((pcie_cap >> 16) & PCI_EXP_FLAGS_VERS);
@@ -735,6 +724,8 @@  static int mvebu_pci_bridge_emul_init(struct mvebu_pcie_port *port)
 		/* We support 32 bits I/O addressing */
 		bridge->conf.iobase = PCI_IO_RANGE_TYPE_32;
 		bridge->conf.iolimit = PCI_IO_RANGE_TYPE_32;
+	} else {
+		bridge_flags |= PCI_BRIDGE_EMUL_NO_IO_FORWARD;
 	}
 
 	/*
@@ -747,7 +738,7 @@  static int mvebu_pci_bridge_emul_init(struct mvebu_pcie_port *port)
 	bridge->data = port;
 	bridge->ops = &mvebu_pci_bridge_emul_ops;
 
-	return pci_bridge_emul_init(bridge, PCI_BRIDGE_EMUL_NO_PREFMEM_FORWARD);
+	return pci_bridge_emul_init(bridge, bridge_flags);
 }
 
 static inline struct mvebu_pcie *sys_to_pcie(struct pci_sys_data *sys)