[2/4] serial: stm32: rework TX DMA state condition

Commit Message

Valentin Caron Jan. 4, 2022, 6:24 p.m. UTC

TX DMA state condition is handled by tx_dma_busy boolean.
This boolean is set when dma descriptor is requested and reset when dma
channel is stopped (dma_terminate).

In stm32_usart_serial_remove(), stm32_usart_stop_tx() and
stm32_usart_transmit_chars_dma() fallback error case, DMA channel is
stopped but tx_dma_busy is not handled.

Rework the driver by using two new functions to solve this issue:
- stm32_usart_tx_dma_started return true if DMA TX have a descriptor.
- stm32_usart_tx_dma_enabled return true if DMAT bit is set.

stm32_usart_tx_dma_started uses tx_dma_busy flag to prevent dual DMA
transaction at the same time. This flag is set when a DMA transaction
begins and is unset when dmaengine_terminate_async function is called.
A new DMA transaction cannot be created if this flag is set.

Create a new function "stm32_usart_tx_dma_terminate" to be sure the flag
is unset after each call of dmaengine_terminate_async.

Signed-off-by: Erwan Le Ray <[e-mail]>
Signed-off-by: Valentin Caron <[e-mail]>
---
 drivers/tty/serial/stm32-usart.c | 66 +++++++++++++++++++++++---------
 drivers/tty/serial/stm32-usart.h |  2 +-
 2 files changed, 49 insertions(+), 19 deletions(-)

Patch

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 6cfc3bec6749..52755a576bc2 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -365,6 +365,31 @@  static unsigned int stm32_usart_receive_chars(struct uart_port *port, bool force
 	return size;
 }
 
+static void stm32_usart_tx_dma_terminate(struct stm32_port *stm32_port)
+{
+	dmaengine_terminate_async(stm32_port->tx_ch);
+	stm32_port->tx_dma_busy = false;
+}
+
+static bool stm32_usart_tx_dma_started(struct stm32_port *stm32_port)
+{
+	/*
+	 * We cannot use the function "dmaengine_tx_status" to know the
+	 * status of DMA. This function does not show if the "dma complete"
+	 * callback of the DMA transaction has been called. So we prefer
+	 * to use "tx_dma_busy" flag to prevent dual DMA transaction at the
+	 * same time.
+	 */
+	return stm32_port->tx_dma_busy;
+}
+
+static bool stm32_usart_tx_dma_enabled(struct stm32_port *stm32_port)
+{
+	const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
+
+	return !!(readl_relaxed(stm32_port->port.membase + ofs->cr3) & USART_CR3_DMAT);
+}
+
 static void stm32_usart_tx_dma_complete(void *arg)
 {
 	struct uart_port *port = arg;
@@ -372,9 +397,8 @@  static void stm32_usart_tx_dma_complete(void *arg)
 	const struct stm32_usart_offsets *ofs = &stm32port->info->ofs;
 	unsigned long flags;
 
-	dmaengine_terminate_async(stm32port->tx_ch);
 	stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT);
-	stm32port->tx_dma_busy = false;
+	stm32_usart_tx_dma_terminate(stm32port);
 
 	/* Let's see if we have pending data to send */
 	spin_lock_irqsave(&port->lock, flags);
@@ -428,10 +452,8 @@  static void stm32_usart_transmit_chars_pio(struct uart_port *port)
 	const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
 	struct circ_buf *xmit = &port->state->xmit;
 
-	if (stm32_port->tx_dma_busy) {
+	if (stm32_usart_tx_dma_enabled(stm32_port))
 		stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT);
-		stm32_port->tx_dma_busy = false;
-	}
 
 	while (!uart_circ_empty(xmit)) {
 		/* Check that TDR is empty before filling FIFO */
@@ -457,10 +479,11 @@  static void stm32_usart_transmit_chars_dma(struct uart_port *port)
 	struct dma_async_tx_descriptor *desc = NULL;
 	unsigned int count, i;
 
-	if (stm32port->tx_dma_busy)
+	if (stm32_usart_tx_dma_started(stm32port)) {
+		if (!stm32_usart_tx_dma_enabled(stm32port))
+			stm32_usart_set_bits(port, ofs->cr3, USART_CR3_DMAT);
 		return;
-
-	stm32port->tx_dma_busy = true;
+	}
 
 	count = uart_circ_chars_pending(xmit);
 
@@ -491,13 +514,21 @@  static void stm32_usart_transmit_chars_dma(struct uart_port *port)
 	if (!desc)
 		goto fallback_err;
 
+	/*
+	 * Set "tx_dma_busy" flag. This flag will be released when
+	 * dmaengine_terminate_async will be called. This flag helps
+	 * transmit_chars_dma not to start another DMA transaction
+	 * if the callback of the previous is not yet called.
+	 */
+	stm32port->tx_dma_busy = true;
+
 	desc->callback = stm32_usart_tx_dma_complete;
 	desc->callback_param = port;
 
 	/* Push current DMA TX transaction in the pending queue */
 	if (dma_submit_error(dmaengine_submit(desc))) {
 		/* dma no yet started, safe to free resources */
-		dmaengine_terminate_async(stm32port->tx_ch);
+		stm32_usart_tx_dma_terminate(stm32port);
 		goto fallback_err;
 	}
 
@@ -522,12 +553,13 @@  static void stm32_usart_transmit_chars(struct uart_port *port)
 	struct circ_buf *xmit = &port->state->xmit;
 
 	if (port->x_char) {
-		if (stm32_port->tx_dma_busy)
+		if (stm32_usart_tx_dma_started(stm32_port) &&
+		    stm32_usart_tx_dma_enabled(stm32_port))
 			stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT);
 		writel_relaxed(port->x_char, port->membase + ofs->tdr);
 		port->x_char = 0;
 		port->icount.tx++;
-		if (stm32_port->tx_dma_busy)
+		if (stm32_usart_tx_dma_started(stm32_port))
 			stm32_usart_set_bits(port, ofs->cr3, USART_CR3_DMAT);
 		return;
 	}
@@ -719,9 +751,8 @@  static void stm32_usart_flush_buffer(struct uart_port *port)
 	const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
 
 	if (stm32_port->tx_ch) {
-		dmaengine_terminate_async(stm32_port->tx_ch);
+		stm32_usart_tx_dma_terminate(stm32_port);
 		stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT);
-		stm32_port->tx_dma_busy = false;
 	}
 }
 
@@ -883,10 +914,11 @@  static void stm32_usart_shutdown(struct uart_port *port)
 	u32 val, isr;
 	int ret;
 
-	if (stm32_port->tx_dma_busy) {
-		dmaengine_terminate_async(stm32_port->tx_ch);
+	if (stm32_usart_tx_dma_enabled(stm32_port))
 		stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT);
-	}
+
+	if (stm32_usart_tx_dma_started(stm32_port))
+		stm32_usart_tx_dma_terminate(stm32_port);
 
 	/* Disable modem control interrupts */
 	stm32_usart_disable_ms(port);
@@ -1424,8 +1456,6 @@  static int stm32_usart_of_dma_tx_probe(struct stm32_port *stm32port,
 	struct dma_slave_config config;
 	int ret;
 
-	stm32port->tx_dma_busy = false;
-
 	stm32port->tx_buf = dma_alloc_coherent(dev, TX_BUF_L,
 					       &stm32port->tx_dma_buf,
 					       GFP_KERNEL);
diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h
index e23916bfbb60..feab952aec16 100644
--- a/drivers/tty/serial/stm32-usart.h
+++ b/drivers/tty/serial/stm32-usart.h
@@ -264,7 +264,7 @@  struct stm32_port {
 	u32 cr1_irq;		 /* USART_CR1_RXNEIE or RTOIE */
 	u32 cr3_irq;		 /* USART_CR3_RXFTIE */
 	int last_res;
-	bool tx_dma_busy;	 /* dma tx busy               */
+	bool tx_dma_busy;	 /* dma tx transaction in progress */
 	bool throttled;		 /* port throttled            */
 	bool hw_flow_control;
 	bool swap;		 /* swap RX & TX pins */