diff mbox series

[v2,4/5] arm64: dts: mediatek: Correct I2C clock of MT8192

Message ID 20220106032420.11544-5-allen-kh.cheng@mediatek.com (mailing list archive)
State New, archived
Headers show
Series Update MT8192 Clock Setting | expand

Commit Message

Allen-KH Cheng Jan. 6, 2022, 3:24 a.m. UTC 
From: Allen-KH Cheng <Allen-KH.Cheng@mediatek.com>

When the initial devicetree for mt8192 was added in 48489980e27e ("arm64:
dts: Add Mediatek SoC MT8192 and evaluation board dts and Makefile"), the
clock driver for mt8192 was not yet upstream, so the clock property nodes
were set to the clk26m clock as a placeholder.

Given that the clock driver has since been added through 710573dee31b ("clk:
mediatek: Add MT8192 basic clocks support"), as well as its dt-bindings
through f35f1a23e0e1 ("clk: mediatek: Add dt-bindings of MT8192 clocks") and
devicetree nodes through 5d2b897bc6f5 ("arm64: dts: mediatek: Add mt8192
clock controllers"), fix the I2C clock property to point to the actual

Signed-off-by: Allen-KH Cheng <Allen-KH.Cheng@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8192.dtsi | 30 ++++++++++++++++--------
 1 file changed, 20 insertions(+), 10 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 8584a20440c5..1eb5874c09a9 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -486,7 +486,8 @@ 
 			reg = <0 0x11cb0000 0 0x1000>,
 			      <0 0x10217300 0 0x80>;
 			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>, <&clk26m>;
+			clocks = <&imp_iic_wrap_e CLK_IMP_IIC_WRAP_E_I2C3>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
 			clock-names = "main", "dma";
 			clock-div = <1>;
 			#address-cells = <1>;
@@ -505,7 +506,8 @@ 
 			reg = <0 0x11d00000 0 0x1000>,
 			      <0 0x10217600 0 0x180>;
 			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>, <&clk26m>;
+			clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C7>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
 			clock-names = "main", "dma";
 			clock-div = <1>;
 			#address-cells = <1>;
@@ -518,7 +520,8 @@ 
 			reg = <0 0x11d01000 0 0x1000>,
 			      <0 0x10217780 0 0x180>;
 			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>, <&clk26m>;
+			clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C8>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
 			clock-names = "main", "dma";
 			clock-div = <1>;
 			#address-cells = <1>;
@@ -531,7 +534,8 @@ 
 			reg = <0 0x11d02000 0 0x1000>,
 			      <0 0x10217900 0 0x180>;
 			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>, <&clk26m>;
+			clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C9>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
 			clock-names = "main", "dma";
 			clock-div = <1>;
 			#address-cells = <1>;
@@ -550,7 +554,8 @@ 
 			reg = <0 0x11d20000 0 0x1000>,
 			      <0 0x10217100 0 0x80>;
 			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>, <&clk26m>;
+			clocks = <&imp_iic_wrap_ws CLK_IMP_IIC_WRAP_WS_I2C1>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
 			clock-names = "main", "dma";
 			clock-div = <1>;
 			#address-cells = <1>;
@@ -563,7 +568,8 @@ 
 			reg = <0 0x11d21000 0 0x1000>,
 			      <0 0x10217180 0 0x180>;
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>, <&clk26m>;
+			clocks = <&imp_iic_wrap_ws CLK_IMP_IIC_WRAP_WS_I2C2>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
 			clock-names = "main", "dma";
 			clock-div = <1>;
 			#address-cells = <1>;
@@ -576,7 +582,8 @@ 
 			reg = <0 0x11d22000 0 0x1000>,
 			      <0 0x10217380 0 0x180>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>, <&clk26m>;
+			clocks = <&imp_iic_wrap_ws CLK_IMP_IIC_WRAP_WS_I2C4>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
 			clock-names = "main", "dma";
 			clock-div = <1>;
 			#address-cells = <1>;
@@ -595,7 +602,8 @@ 
 			reg = <0 0x11e00000 0 0x1000>,
 			      <0 0x10217500 0 0x80>;
 			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>, <&clk26m>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C5>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
 			clock-names = "main", "dma";
 			clock-div = <1>;
 			#address-cells = <1>;
@@ -614,7 +622,8 @@ 
 			reg = <0 0x11f00000 0 0x1000>,
 			      <0 0x10217080 0 0x80>;
 			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>, <&clk26m>;
+			clocks = <&imp_iic_wrap_n CLK_IMP_IIC_WRAP_N_I2C0>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
 			clock-names = "main", "dma";
 			clock-div = <1>;
 			#address-cells = <1>;
@@ -627,7 +636,8 @@ 
 			reg = <0 0x11f01000 0 0x1000>,
 			      <0 0x10217580 0 0x80>;
 			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>, <&clk26m>;
+			clocks = <&imp_iic_wrap_n CLK_IMP_IIC_WRAP_N_I2C6>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
 			clock-names = "main", "dma";
 			clock-div = <1>;
 			#address-cells = <1>;