| Message ID | 20220112151814.24361-10-pali@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | PCI: mvebu: subsystem ids, AER and INTx | expand |
On Wed, 12 Jan 2022 16:18:12 +0100 Pali Rohár <pali@kernel.org> wrote: > Signed-off-by: Pali Rohár <pali@kernel.org> > Acked-by: Rob Herring <robh@kernel.org> > --- > Documentation/devicetree/bindings/pci/mvebu-pci.txt | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt > index 24225852bce0..6d022a9d36ee 100644 > --- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt > +++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt > @@ -81,6 +81,11 @@ and the following optional properties: > - reset-gpios: optional GPIO to PERST# > - reset-delay-us: delay in us to wait after reset de-assertion, if not > specified will default to 100ms, as required by the PCIe specification. > +- interrupt-names: list of interrupt names, supported are: > + - "intx" - interrupt line triggered by one of the legacy interrupt > +- interrupts or interrupts-extended: List of the interrupt sources which > + corresponding to the "interrupt-names". If non-empty then also additional > + 'interrupt-controller' subnode must be defined. > > Example: > Empty commit message. At least add something like this: Document the following additional properties in the mvebu-pci DT binding: - interrupt-names - interrupts / interrupts-extended Marek
diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt index 24225852bce0..6d022a9d36ee 100644 --- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt +++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt @@ -81,6 +81,11 @@ and the following optional properties: - reset-gpios: optional GPIO to PERST# - reset-delay-us: delay in us to wait after reset de-assertion, if not specified will default to 100ms, as required by the PCIe specification. +- interrupt-names: list of interrupt names, supported are: + - "intx" - interrupt line triggered by one of the legacy interrupt +- interrupts or interrupts-extended: List of the interrupt sources which + corresponding to the "interrupt-names". If non-empty then also additional + 'interrupt-controller' subnode must be defined. Example: